E16ZPX-R Price, Distributor, Stock

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: Solder Pin, Minimum Frequency: 10 MHz, Maximum Frequency: 6 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 6 GHz N Bias Tee Rated to 2500 mA and 100 Volts DC. PE1616 bias tee (also called bias T) has an type N connector RF port that is female gender. This Pasternack female type N bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 6 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This type N bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1616 bias T with N type connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $791.99
10 : $760.31
25 : $728.63

PE1627

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: DC, Minimum Frequency: 10 MHz, Maximum Frequency: 6 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 6 GHz SMA Broadband Bias Tee, Rated to 2.5 Amps and 100 Volts, DC Pin. PE1627 bias tee (also called bias T) has a SMA connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female SMA bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 6 GHz. Our RF coaxial bias tee has a SMA DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1627 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1627 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1627 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1627 SMA bias tee has typical and maximum insertion loss of 0.5 dB and 1.25 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,390.0
5 : $1,334.4
10 : $1,278.8
25 : $1,223.2

PE1621

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 10 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 16 Volts, Maximum DC Current: 250 mA. 10 MHz to 40 GHz 2.92mm Bias Tee Rated to 250 mA and 16 Volts DC. PE1621 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 250 mA. The PE1621 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,330.0
5 : $2,283.4
10 : $2,236.8

PE1623

Pasternack Enterprises

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: SMA, Minimum Frequency: 10 MHz, Maximum Frequency: 2.5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 2.5 GHz N Broadband Bias Tee, Male Output, Rated to 2.5 Amps and 100 Volts, DC SMA connector. PE1623 bias tee (also called bias T) has a type N connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female type N bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 2.5 GHz. Our RF coaxial bias tee has a type N DC port connector with a female gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1623 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 40 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1623 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1623 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type N high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1623 type N bias tee has typical and maximum insertion loss of 0.3 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type N RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,350.0
5 : $1,296.0
10 : $1,242.0
25 : $1,188.0

PE1622

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 500 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 500 MHz to 40 GHz 2.92mm Bias Tee Rated to 1000 mA and 50 Volts DC. PE1622 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1622 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,660.0
5 : $2,606.8
10 : $2,553.6

PE1636

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: DC, Minimum Frequency: 0.05 MHz, Maximum Frequency: 18 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 750 mA. 50 KHz to 18 GHz SMA Broadband Bias Tee, Male Input, Rated to 750 MHz and 25 Volts, DC Pin. PE1636 bias tee (also called bias T) has a SMA connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male SMA bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 18 GHz. Our RF coaxial bias tee has a SMA DC port connector with a male gender. This SMA bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 750 mA. The PE1636 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1636 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1636 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1636 SMA bias tee has typical and maximum insertion loss of 1 dB and 1.5 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $2,380.0
5 : $2,284.8
10 : $2,189.6
25 : $2,094.4

PE1638

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: DC, Minimum Frequency: 0.05 MHz, Maximum Frequency: 26 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 750 mA. 50 KHz to 26 GHz SMA Broadbanc Bias Tee, Male Input, Rated to 750 MHz and 25 Volts, DC Pin. PE1638 bias tee (also called bias T) has a SMA connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male SMA bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 26 GHz. Our RF coaxial bias tee has a SMA DC port connector with a male gender. This SMA bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 750 mA. The PE1638 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1638 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1638 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1638 SMA bias tee has typical and maximum insertion loss of 1.4 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $2,380.0
5 : $2,284.8
10 : $2,189.6
25 : $2,094.4

PE1640

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: SMA, Minimum Frequency: 0.012 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2.5:1, Maximum Voltage: 16 Volts, Maximum DC Current: 150 mA. 12 KHz to 40 GHz 2.92mm Broadband Bias Tee, Male Input, Rated to 150 mA and 16 Volts, DC SMA Connector. PE1640 bias tee (also called bias T) has a 2.92mm connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male 2.92mm bias tee design is rated for a minimum frequency of 0.012 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a 2.92mm DC port connector with a male gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 150 mA. The PE1640 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1640 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1640 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our 2.92mm high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1640 2.92mm bias tee has typical and maximum insertion loss of 1.5 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with 2.92mm RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $3,630.0
5 : $3,484.8
10 : $3,339.6
25 : $3,194.4

PE1658

Pasternack Enterprises

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: SMA, Minimum Frequency: 500 MHz, Maximum Frequency: 2 GHz, RF Port Maximum VSWR: 1.4:1, Maximum Voltage: 100 Volts, Maximum DC Current: 7,000 mA. 0.5 GHz to 2 GHz N Type High Current Bias Tee, Rated 7 Amps and 100 Volts, DC SMA Connector. PE1658 bias tee (also called bias T) has a type N connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male type N bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 2 GHz. Our RF coaxial bias tee has a type N DC port connector with a male gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 7,000 mA. The PE1658 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.4:1 and a RF to bias isolation typical of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1658 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1658 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type N high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1658 type N bias tee has typical and maximum insertion loss of 0.2 dB and 0.5 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type N RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,350.0
5 : $1,296.0
10 : $1,242.0
25 : $1,188.0

PE1659

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 1.0mm, DC Port Connector Series: SMC, Minimum Frequency: 100 MHz, Maximum Frequency: 110 GHz, Maximum Voltage: 16 Volts, Maximum DC Current: 0.4 Amps. 100 MHz to 110 GHz Ultra-Wide Band Bias Tee 1.0mm(f) input, 1.0mm(m) output, SMC(m) bias Rated to 0.4 Amps and 16 Volts DC. PE1659 bias tee (also called bias T) has an 1.0mm connector RF port that is female gender. This Pasternack female 1.0mm bias tee design is rated for a minimum frequency of 100 MHz and a maximum frequency of 110 GHz. Our RF coaxial bias tee has a smc DC port connector with a female gender. This 1.0mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 0.4 Amps. The PE1659 bias T with 1.0mm connector series for RF port is designed with a maximum VSWR of. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 1.0mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $17,200.0
5 : $16,512.0
10 : $15,824.0
25 : $15,136.0

PE1661

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 1.0mm, DC Port Connector Series: SMC, Minimum Frequency: 0.05 MHz, Maximum Frequency: 110 GHz, Maximum Voltage: 16 Volts, Maximum DC Current: 0.4 Amps. 0.05 MHz to 110 GHz Ultra-Wide Band Bias Tee 1.0mm(f) input, 1.0mm(m) output, SMC(m) bias Rated to 0.4 Amps and 16 Volts DC. PE1661 bias tee (also called bias T) has an 1.0mm connector RF port that is female gender. This Pasternack female 1.0mm bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 110 GHz. Our RF coaxial bias tee has a smc DC port connector with a female gender. This 1.0mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 0.4 Amps. The PE1661 bias T with 1.0mm connector series for RF port is designed with a maximum VSWR of. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 1.0mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $18,800.0
5 : $18,048.0
10 : $17,296.0
25 : $16,544.0

PE1625

Pasternack Enterprises

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: DC, Minimum Frequency: 10 MHz, Maximum Frequency: 2.5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 2.5 GHz N Broadband Bias Tee, Male Input, Rated to 2.5 Amps and 100 Volts, DC Pin. PE1625 bias tee (also called bias T) has a type N connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male type N bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 2.5 GHz. Our RF coaxial bias tee has a type N DC port connector with a male gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1625 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1625 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1625 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type N high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1625 type N bias tee has typical and maximum insertion loss of 0.2 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with N type RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,350.0
5 : $1,296.0
10 : $1,242.0
25 : $1,188.0

PE1607

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: Solder Pin, Minimum Frequency: 0.1 MHz, Maximum Frequency: 18 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 24 Volts, Maximum DC Current: 750 mA. 0.1 MHz to 18 GHz SMA Bias Tee Rated to 750 mA and 24 Volts DC. PE1607 bias tee (also called bias T) has an SMA connector RF port that is female gender. This Pasternack female SMA bias tee design is rated for a minimum frequency of 0.1 MHz and a maximum frequency of 18 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 24 Volts and a max. current of 750 mA. The PE1607 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation minimum of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $727.99
5 : $698.87
10 : $669.75
25 : $640.63

PE1652

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: DC, Minimum Frequency: 1 GHz, Maximum Frequency: 6 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 7,000 mA. 1 GHz to 6 GHz SMA High Current Bias Tee, Rated 7 Amps and 100 Volts, DC Pin. PE1652 bias tee (also called bias T) has a SMA connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female SMA bias tee design is rated for a minimum frequency of 1 GHz and a maximum frequency of 6 GHz. Our RF coaxial bias tee has a SMA DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 7,000 mA. The PE1652 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1652 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1652 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1652 SMA bias tee has typical and maximum insertion loss of 0.5 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,350.0
5 : $1,296.0
10 : $1,242.0
25 : $1,188.0

PE1644

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: SMA, Minimum Frequency: 0.012 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2.5:1, Maximum Voltage: 16 Volts, Maximum DC Current: 150 mA. 12 KHz to 40 GHz, 2.92mm Broadband Bias Tee, Rated 150 mA and 16 Volts, DC SMA Connector. PE1644 bias tee (also called bias T) has a 2.92mm connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 0.012 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a 2.92mm DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 150 mA. The PE1644 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1644 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1644 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our 2.92mm high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1644 2.92mm bias tee has typical and maximum insertion loss of 1.5 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with 2.92mm RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $3,630.0
5 : $3,484.8
10 : $3,339.6
25 : $3,194.4