 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
E73XAX-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 ComSIT USA | CW005100R0JE73 | Vishay Intertechnologies | SILICONE COATED COMMERCIAL POWER WIREWOUND RESISTOR Fixed Resistor, Wire Wound, 5W, 100ohm, 22.361V, 5% +/-Tol, 30ppm/Cel, Through Hole Mount RoHS : Compliant | 1,000 | ||
| TLE7368EXUMA3 | Infineon Technologies AG | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, CMOS, PDSO36 RoHS : Compliant | 1,000 | |||
| CW00530K00JE73 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 5W, 30000ohm, 387.298V, 5% +/-Tol, 30ppm/Cel, Through Hole Mount RoHS : Not Compliant | 500 | |||
| QGE7320MCSL8EF | Intel Corporation | Dynamic RAM (DRAM) Tray RoHS : Compliant | 371 | |||
| EDGE737ATF | Semtech Corporation | Electronic Component RoHS : Compliant | 231 | |||
| E7302F100Y | Atmel Corporation | Electronic Component RoHS : Not Compliant | 211 | |||
 Rutronik | MFR200FRE73-3K3 | YAGEO Corporation | MFR200 3,3K 1% 2W TK50 RoHS : Compliant |
| 4,000 | |
| MFR100FTE73-100R | YAGEO Corporation | MFR100 100R 1% 1W TK50 RoHS : Compliant |
| 1,000 | ||
| MFR100FTE73-33R | YAGEO Corporation | MFR100 33R 1% 1W TK50 RoHS : Compliant |
| 1,000 | ||
| ME73MS01 | MINEW | 24GHz top mount RoHS : Compliant |
| 56 | ||
| ME73MS01-002 | MINEW | 24GHz side mount firmware RoHS : Compliant |
| 24 | ||
 Braemac Americas-Symmetry | ASE7-38.400MHZ-LC-T | Abracon Corporation |
| 0 | ||
| ASE7-38.400MHZ-LR-T | Abracon Corporation |
| 0 | |||
| ASE-7.3728MHZ-L-C-T | Abracon Corporation | XTAL OSC XO 7.3728MHZ CMOS SMD RoHS : Compliant |
| 0 | ||
 DB Roberts | PSE-7.3M-01 | Essentra Components | 0 | |||
| PSE-7.3M-19 | Essentra Components | 0 | ||||
 Maritex | CLA1B-MKW-XD0F0E73 | Cree, Inc. | LED CLA1B-MKW PLCC4; grade: XD0F0E73; warm white 2850-3250K; 6.3-13.9 lm/30mA; max 80mA; 3.2x2.8mm, 120 deg; BIN (7) RoHS : Compliant |
| 8,519 | |
| SP301-MKW-XD0F0E73 | Cree, Inc. | LED CREE SP301-MKW-XD0F0E73; flux min. 6.3lm/30mA; warm white; BIN 7A3; Voltage BIN: 29 |
| 45 | ||
 Pasternack Enterprises US | PE73SP1072 | Pasternack Enterprises | Key Specifications, Impedance: 50 Ohm, Connector In Series: TNC, Connector In Gender: Female, Connector Out Gender: Male, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Maximum Input Power: 200 Watts, Direction: Bi-Directional. RF Surge Protector, Reverse Polarity TNC F/M, DC - 6GHz, DC Pass 60Vdc. RF surge protector (also known as lightning arrester) PE73SP1072 from Pasternack is manufactured to precise radio frequency component standards for protection from electrical surges. This RF surge protector component in a coaxial in-line design is manufactured with TNC connectors and they are 50 Ohm. Our in-line coaxial TNC surge / lightning protector / arrester uses female connectors. Pasternack TNC lightning surge protector has maximum frequency of 6 GHz and a maximum power of 200 watts. PE73SP1072 radio frequency coaxial surge suppressor is part of more than 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our coax lightning electrical surge protector arrester is in stock at our ISO 9001:2008 Irvine, CA facility. Pasternack Enterprises is where to buy your RF surge / lightning protector, arrester and suppression components for same day shipping throughout the United States and internationally as with other Pasternack RF parts. |
| 420 | |
| PE7322-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Male To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7322-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7322-40 40 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7322-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 56 | ||
| PE7323-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Female To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7323-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a type N female connector on side 2. The Pasternack PE7323-40 40 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7323-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 56 | ||
| PE73SP1062 | Pasternack Enterprises | Key Specifications, Impedance: 50 Ohm, Connector In Series: 4.3-10, Connector In Gender: Female, Connector Out Series: 4.3-10, Connector Out Gender: Male, Minimum Frequency: 698 MHz, Maximum Frequency: 2.7 GHz, Maximum Input Power: 500 Watts, Direction: Bidirectional, Throughput Energy: 1,000 uJ. 4.3-10 F/M Bulkhead Coaxial RF Surge Protector, 698MHz - 2.7GHz, 500W, IP67, 80 V Max, 1mJ, 20kA, Filter, Low PIM -173 dBc. RF surge protector (also known as lightning arrester) PE73SP1062 from Pasternack is manufactured to precise radio frequency component standards for protection from electrical surges. This RF surge protector component in a coaxial in-line design is manufactured with 4.3-10 connectors and they are 50 Ohm. Our in-line coaxial 4.3-10 surge / lightning protector / arrester uses female connectors. Pasternack 4.3-10 lightning surge protector has maximum frequency of 2.7 GHz and a maximum power of 500 watts. PE73SP1062 radio frequency coaxial surge suppressor is part of more than 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our coax lightning electrical surge protector arrester is in stock at our ISO 9001:2008 Irvine, CA facility. Pasternack Enterprises is where to buy your RF surge / lightning protector, arrester and suppression components for same day shipping throughout the United States and internationally as with other Pasternack RF parts. |
| 41 | ||
| PE7322-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7322-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7322-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7322-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 32 | ||
| PE7395-4 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.6:1, Attenuation: 4 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 4 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7395-4 is a fixed 4 dB attenuator from Pasternack. This 4dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7395-4 4 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7395-4 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 4dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. RoHS : Compliant |
| 23 | ||
| PE7317-10 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Female To N Male Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7317-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a type N male connector on side 2. The Pasternack PE7317-10 10 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7317-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 18 | ||
| PE7394-6 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.35:1, Attenuation: 6 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, N Male To N Female Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 4 GHz. PE7394-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7394-6 6 dB attenuator is rated for up to 4 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7394-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 18 | ||
| PE7316-10 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 10 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 7/16 DIN Female To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7316-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N female connector on side 2. The Pasternack PE7316-10 10 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7316-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 14 | ||
| PE7386-3 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.2:1, Attenuation: 3 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 3 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 3 GHz. PE7386-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7386-3 3 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7386-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 6 | ||
| PE7388-3 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.15:1, Attenuation: 3 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 3 dB Fixed Attenuator, N Male to N Female Unidirectional Black Anodized Aluminum Heatsink Body Rated to 50 Watts Up to 3 GHz. PE7388-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7388-3 3 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7388-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 4 | ||
| PE7387-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 200 Watt, VSWR Maximum: 1.35:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male to N Female Unidirectional Black Anodized Aluminum Heatsink Body Rated to 200 Watts Up to 3 GHz. PE7387-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7387-30 30 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 200 Watts at the stated attenuation value. Our fixed RF attenuator PE7387-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 3 | ||
| PE7388-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.15:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male to N Female Unidirectional Black Anodized Aluminum Heatsink Body Rated to 50 Watts Up to 3 GHz. PE7388-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7388-30 30 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7388-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 3 | ||
| PE7312-6 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 6 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 7/16 DIN Male To 7/16 DIN Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7312-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a male gender on side 1 and a 7/16 DIN female connector on side 2. The Pasternack PE7312-6 6 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7312-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 2 | ||
| PE7310-6 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 6 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7310-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7310-6 6 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7310-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 2 | ||
 Venkel Ltd. | MELFC0102-UE-7321FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;7.32K;�1% RoHS : Compliant | 0 | ||
| HPTF1206-UE-7323AT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�25PPM;732K ;�0.05% RoHS : Compliant | 0 | |||
| HPTF1210-UE-7320AT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;732R;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UE-7321AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�25PPM;7.32K;�0.05% RoHS : Compliant | 0 | |||
| MELFC0204-TE-7322DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;73.2K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TE-73R2BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;73.2R;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-7322BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;73.2K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-7323DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;732K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-7322DT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;73.2K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-73R2BT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;73.2R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-RE-7321UT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�25PPM;7.32K;�0.01% RoHS : Compliant | 0 | |||
| HPTF0805-TE-7321AT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;7.32K;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UE-73R2CT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�25PPM;73.2R;�0.25% RoHS : Compliant | 0 | |||
| HPTF2512-XE-73R2CT | VENKEL LTD | High Power Thin Film CR;2512;1W;�25PPM;73.2R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-E-73R2AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;73.2R;�0.05% RoHS : Compliant | 0 | |||
 Wuhan P&S | RS01010R00BE73 | Vishay Intertechnologies | Wirewound Resistors, Industrial, Precision Power, Silicone Coated, Axial Lead RoHS : Compliant |
| 1,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British