 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
E74ZQG-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | D55342K07B3E74RS2 | Vishay Intertechnologies | SMD Chip Resistor, 3.74 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B3E74RS2) RoHS : Not Compliant |
| 20,000 | |
| M55342K06B1E74RS3 | Vishay Intertechnologies | SMD Chip Resistor, 1.74 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B1E74RS3) RoHS : Not Compliant |
| 3,000 | ||
| M55342K06B2E74RS2 | Vishay Intertechnologies | SMD Chip Resistor, 2.74 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B2E74RS2) RoHS : Not Compliant |
| 1,500 | ||
| D55342K07B1E74RS2 | Vishay Intertechnologies | SMD Chip Resistor, 1.74 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B1E74RS2) RoHS : Not Compliant |
| 1,000 | ||
| M55342K06B2E74RS3 | Vishay Intertechnologies | SMD Chip Resistor, 2.74 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B2E74RS3) RoHS : Not Compliant |
| 1,000 | ||
| M55342K04B2E74RS3 | Vishay Intertechnologies | SMD Chip Resistor, 2.74 kohm, ? 1%, 150 mW, 1505 [3812 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K04B2E74RS3) RoHS : Not Compliant |
| 1,000 | ||
| M55342K04B1E74RS3 | Vishay Intertechnologies | SMD Chip Resistor, 1.74 kohm, ? 1%, 150 mW, 1505 [3812 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K04B1E74RS3) RoHS : Not Compliant |
| 1,000 | ||
| RJE741AA1110 | Amphenol Corporation | - Trays (Alt: RJE741AA1110) RoHS : Compliant |
| 960 | ||
| 653E7425C3T | CTS Corporation | - Tape and Reel (Alt: 653E7425C3T) RoHS : Compliant |
| 0 | ||
| 653E74A5I2T | CTS Corporation | - Tape and Reel (Alt: 653E74A5I2T) RoHS : Compliant |
| 0 | ||
| MWDM1L-37P-6E7-48B | Glenair Inc | - Bulk (Alt: MWDM1L-37P-6E7-48B) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-100CS-6E7-4B | Glenair Inc | - Bulk (Alt: MWDM2L-100CS-6E7-4B) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-15P-4E7-48K | Glenair Inc | - Bulk (Alt: MWDM2L-15P-4E7-48K) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-31CS-8E7-4K | Glenair Inc | - Bulk (Alt: MWDM2L-31CS-8E7-4K) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-37S-6E7-4S1 | Glenair Inc | - Bulk (Alt: MWDM2L-37S-6E7-4S1) RoHS : Not Compliant |
| 0 | ||
 Newark | RJE741888120A | Amphenol Communications Solutions | Modular Conn, 8P8C, Rj45 Jack, Cat3, Th; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:Cat3; Ip Rating:Ip20; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 1,520 | |
| RJE741888120A | Amphenol Communications Solutions | Modular Conn, 8P8C, Rj45 Jack, Cat3, Th; |Amphenol Communications Solutions RJE741888120A RoHS : Compliant |
| 490 | ||
TLE7469GV52AUMA1 | Infineon Technologies AG | Ic, Ldo Reg 5/2.6V, 250/200Ma, Dso12; |Infineon Technologies TLE7469GV52AUMA1 RoHS : Compliant |
| 396 | ||
| TLE7469GV53AUMA1 | Infineon Technologies AG | Ldo, Fixed, Auto, 5V, 0.215A, Soic-12; |Infineon Technologies TLE7469GV53AUMA1 RoHS : Compliant |
| 246 | ||
| TLE7469GV53AUMA1 | Infineon Technologies AG | Ldo, Fixed, Auto, 5V, 0.215A, Soic-12; |Infineon Technologies TLE7469GV53AUMA1 RoHS : Compliant |
| 246 | ||
| RJE741AA1110 | Amphenol Communications Solutions | Modular Conn, Jack, 10P10C, 1Port, Th; Modular Connector Type:Modular Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):10P10C; Lan Category:-; Ip Rating:-; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 240 | ||
| UE27AE7410H | Amphenol Communications Solutions | Usb Conn, Ue27Ae7410H; |Amphenol Communications Solutions UE27AE7410H RoHS : Not Compliant |
| 90 | ||
| OCI-490-20 IE740-XE-T | EPIGAP OSA Photonics | Ir Emitter, 0.35A, 740Nm, Smd; |Epigap OCI-490-20 IE740-XE-T RoHS : Compliant |
| 63 | ||
| OCI-490-20 IE740-XE-T | EPIGAP OSA Photonics | Ir Emitter, 0.35A, 740Nm, Smd; |Epigap OCI-490-20 IE740-XE-T RoHS : Compliant |
| 63 | ||
| TZE741 | Brother International | 18Mm Black On Green Tape; |Brother TZE741 RoHS : Compliant |
| 29 | ||
| CUE7430WH | Takachi Electronics Enclosure Co Ltd | Enclosure, Network Box, Asa, Off White; |Takachi CUE7430WH RoHS : Compliant |
| 6 | ||
| FEMC004GPE-E740 | Flexxon Pte Ltd | Flash Memory, Pslc Nand, 4Gb, Fbga-153; |Flexxon FEMC004GPE-E740 RoHS : Compliant |
| 5 | ||
| MIKROE-748 | MikroElektronika | Complier, Pic32, Full, Pro, Usb Dongle; |Mikroelektronika MIKROE-748 RoHS : Compliant |
| 1 | ||
| MIKROE-740 | MikroElektronika | Compiler, Usb Dongle, 8051, Pascal; |Mikroelektronika MIKROE-740 RoHS : Compliant |
| 1 | ||
| B7744E742B5F | maxon precision motors inc | Dc Motor, Brushed, 12V, 10.4W, 7140Rpm; |Maxon Motor B7744E742B5F RoHS : Compliant |
| 1 | ||
 RS | TZE741 | Brother International | TAPE, LAMINATED, 3/4 IN., BLACK ON GREEN |
| 54 | |
| BSE000L (BSE 74.1-RK) | Balluff Inc | BSE - REPLACEMENT SWITCH KITS FOR BNS, BSE 74.1-RK |
| 3 | ||
| LE7-40-1753 | Sprecher + Schuh | LE7 UL508 DISCONNECT SWITCH, FRONT MOUNT, 40A, 3-POLE, POLES 3-POLE, GRAY, LE7 |
| 2 | ||
| E74010 | ifm efector inc | AS-I FLAT CABLE; 100 M; EPDM; BLACK |
| 1 | ||
| QS30VR3RE-74180 | Banner Engineering Corp | PHOTOELECTRIC, QS30 VR3RE-74180 KIT |
| 1 | ||
| E74 | Siemens | HEATER |
| 0 | ||
| RJHSE7466 | Amphenol Commercial | 6P6C, RA, SHIELD, WITH LEDS |
| 0 | ||
| GLE7400FAM | Eaton Cutler-Hammer | EATON ELECT. LABELED LGE 4P 400A, FIXED THERM, ADJ MAG W/END |
| 0 | ||
| MIKROE-744 | MikroElektronika | MIKROPASCAL PRO FOR DSPIC (USB DONGLE) |
| 0 | ||
| LGE7400FAW | Eaton Cutler-Hammer | LGE 4 POLE 400 AMP CIRCUIT BREAKER WITHOUT TERMINALS, 100% N |
| 0 | ||
| RJE741882310 | Amphenol Commercial | MODULAR JACK - SINGLE PORT, 8P8C, VERTICAL, THT, |
| 0 | ||
| FE7419-34-02K | Quest Technology International Inc | CABINET, 5' 34 RMS 27.5" X42" BLACK 740 SERIES, KNOCKDOWN |
| 0 | ||
| RJE741885410B | Amphenol Commercial | 8P8C, VERTICAL, SHIELD, SINGLE PORT, CONTACTS AN |
| 0 | ||
| RJE741881310A | Amphenol Commercial | MODULAR JACK - SINGLE PORT, 8P8C, VERTICAL, THT, |
| 0 | ||
| FO-500.625-BVYEE7.465 | Bimba Manufacturing Company | 1-1/2IN BORE ; STROKE: 0.312 INCH(S); SCREW CLEARANCE HOLES, FRONT [4F] |
| 0 | ||
 Microchip Technology Inc | EA60E74A | Microchip Technology Inc | PIC32CZ CA70 Cur Ult EA, Projected EOL: - Contact for Pricing | 0 | ||
| FE-7415-00N | Microchip Technology Inc | P/S. AC/DC 65W 56V DoE VII 10Gig + Casing for 9501-10GS, Projected EOL: 2051-02-23 - Contact for Pricing | 0 | |||
| FE-7416-00N | Microchip Technology Inc | P/S. AC/DC 100W 56V DoE VII + Casing for 9601GS, Projected EOL: 2051-02-23 - Contact for Pricing | 0 | |||
| FE-7412-00N | Microchip Technology Inc | P/S. AC/DC 50V/10V 16W -10C to 55C + Casing for 9001-10GS, Projected EOL: 2051-02-23 - Contact for Pricing | 0 | |||
| FE-7404-00N | Microchip Technology Inc | P/S. AC/DC 65W 56V + Casing for 9501GS, Projected EOL: 2051-02-23 - Contact for Pricing | 0 | |||
| FE-7419-00N | Microchip Technology Inc | P/S. AC/DC 100W 56V DoE VII 10G+ Casing for 9601-10GS, Projected EOL: 2051-02-23 - Contact for Pricing | 0 | |||
 Bisco Industries | MS20470E7-4 | MS Rivets | 2 | |||
| AE74219A | Danfoss A/S | 1 | ||||
 Rochester Electronics | TLE7469GV52AUMA1 | Infineon Technologies AG | Fixed Positive LDO Regulator, 2 Output, 5V1, 2.6V2, PDSO12 RoHS : Compliant |
| 970 | |
| TLE7469GV53AUMA1 | Infineon Technologies AG | Fixed Positive LDO Regulator, 2 Output, 5V1, 3.3V2, PDSO12 RoHS : Compliant |
| 1,440 | ||
COP8SGE744V8/NOPB | Texas Instruments | Microcontroller, 8-Bit, OTPROM, COP800 CPU, 15MHz, CMOS, PQCC44 RoHS : Compliant |
| 1,271 | ||
COP8SGE744V8 | Texas Instruments | Microcontroller, 8-Bit, OTPROM, COP800 CPU, 15MHz, CMOS, PQCC44 RoHS : Not Compliant |
| 1,187 | ||
| COP8SGE744V8 | National Semiconductor Corporation | Microcontroller, 8-Bit, OTPROM, COP800 CPU, 15MHz, CMOS, PQCC44 RoHS : Not Compliant |
| 249 | ||
| COP8SGE744V8/NOPB | National Semiconductor Corporation | Microcontroller, 8-Bit, OTPROM, COP800 CPU, 15MHz, CMOS, PQCC44 RoHS : Compliant |
| 2,239 | ||
| SIT1602AC-12-33E-74.176000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 74.176MHz 2.97V ~ 3.63V ±25ppm 4-SMD T/R RoHS : Compliant |
| 250 | ||
| SIT8003AC-12-33E-74.25000T | SiTime Corporation | LVCMOS Output Clock Oscillator, 74.25MHz Nom RoHS : Compliant |
| 24,000 | ||
| SIT8003AI-32-33E-74.25000Y | SiTime Corporation | LVCMOS Output Clock Oscillator, 74.25MHz Nom RoHS : Compliant |
| 900 | ||
| SIT8103AC-32-33E-74.17600X | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 74.176MHz 2.97V ~ 3.63V ±25ppm 4-SMD T/R RoHS : Compliant |
| 240 | ||
| SIT8103AC-33-33E-74.25000Y | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 74.25MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 1,000 | ||
 Sager | AAE7414-00 | TE Connectivity | TE Connectivity 100P2627F09-01-1-C-JP-L45 | 0 | ||
| FFA.2E.740.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| FFA.3E.745.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET |
| 0 | ||
ATS-14E-74-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| ATS-06E-74-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| ATS-09E-74-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| ATS-16E-74-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| FFA.0E.740.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET |
| 0 | ||
| FFA.1E.745.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| ATS-03E-74-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| ATS-10E-74-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
| AAE7470-00 | TE Connectivity | TE Connectivity 91H1-17-08-4-C-HE200 | 0 | |||
| 27E740 | TE Connectivity | Relay Sockets & Hardware SOCKET 4POLE R10 SER RoHS : Compliant | 0 | |||
| AXE744127 | Panasonic Electronic Components | BOARD TO BOARD & MEZZANINE CONNECTORS RoHS : Compliant |
| 0 | ||
| ATS-17E-74-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
 TME | RJHSE7440 | Amphenol Corporation | Connector: RJ45; PIN: 6; Cat 5; shielded,EMI; thermoplastic; THT |
| 1,320 | |
| E740NEO | Eclipse Magnetics | Magnet: permanent; NdFeB; 6N; Ø: 6mm; H: 20mm; steel; screwed fole |
| 56 | ||
| NTE74LS295A | NTE Electronics Inc | IC: digital; 4bit,shift register; TTL; THT; DIP14; OUT: 3-state |
| 21 | ||
| NTE74LS33 | NTE Electronics Inc | IC: digital; NOR; Ch: 4; IN: 2; TTL; THT; DIP14; OUT: open collector |
| 20 | ||
| NTE74LS266 | NTE Electronics Inc | IC: digital; XNOR; Ch: 4; IN: 2; TTL; THT; DIP14; OUT: open collector |
| 18 | ||
| NTE74LS03 | NTE Electronics Inc | IC: digital; NAND; Ch: 4; IN: 2; TTL; THT; DIP14; OUT: open collector |
| 17 | ||
| NTE74LS85 | NTE Electronics Inc | IC: digital; 4bit,comparator; TTL; THT; DIP16 RoHS : Compliant |
| 8 | ||
| NTE74LS193 | NTE Electronics Inc | IC: digital; 4bit,binary up/down counter,inverting,synchronous RoHS : Compliant |
| 5 | ||
| NTE74LS153 | NTE Electronics Inc | IC: digital; 4 to 1 line,multiplexer,data selector; Ch: 2; DIP16 |
| 5 | ||
| NTE74LS643 | NTE Electronics Inc | IC: digital; bus transceiver; Ch: 8; TTL; THT; DIP20; OUT: 3-state |
| 4 | ||
| MCT06030E7419BPW00 | Vishay Intertechnologies | Resistor: thin film; 74.1Ω; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| MCT06030E7419BP100 | Vishay Intertechnologies | Resistor: thin film; 74.1Ω; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| MCT0603ME7411BP500 | Vishay Intertechnologies | Resistor: thin film; 7.41kΩ; SMD; 0603; 0.21W; ±0.1%; MCT0603; M; 75V RoHS : Compliant |
| 0 | ||
| MCT0603ME7412BPW00 | Vishay Intertechnologies | Resistor: thin film; 74.1kΩ; SMD; 0603; 0.21W; ±0.1%; MCT0603; M; 75V RoHS : Compliant |
| 0 | ||
| MCT0603ME7412BP500 | Vishay Intertechnologies | Resistor: thin film; 74.1kΩ; SMD; 0603; 0.21W; ±0.1%; MCT0603; M; 75V RoHS : Compliant |
| 0 | ||
 ComSIT USA | WE744823422 | AVAILABLE EU | 302 | |||
ComSIT USA | GSP2E7410 | CSR plc | Electronic Component RoHS : Not Compliant | 1,172 | ||
| LTE7477LM2TA | Lite-On Semiconductor Corporation | Electronic Component RoHS : Compliant | 1,000 | |||
| TLE7469GV52 | Infineon Technologies AG | Fixed Positive LDO Regulator, 2 Output, 5V1, 2.6V2, PDSO12 RoHS : Compliant | 885 | |||
| COP8SGE744V8 | National Semiconductor Corporation | 8-BIT CMOS OTP MICROCONTROLLER WITH 8K MEMORY, TWO COMPARATORS AND USART Microcontroller, 8-Bit, OTPROM, COP800 CPU, 15MHz, CMOS, PQCC44 RoHS : Not Compliant | 794 | |||
| B45196E7475K409 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 50V, 10% +Tol, 10% -Tol, 4.7uF, Surface Mount, 2917 RoHS : Compliant | 420 | |||
| CEVEE740QB5301TSD0 | TDK Micronas GmbH | Electronic Component RoHS : Compliant | 262 | |||
| TLE7469GV52AUMA1 | Infineon Technologies AG | Fixed Positive LDO Regulator, 2 Output, 5V1, 2.6V2, PDSO12 RoHS : Compliant | 155 | |||
 Interstate Connecting Components | MWDM1L-37P-6E7-48B | Glenair Inc | 0 | |||
| MWDM2L-100CS-6E7-4B | Glenair Inc | 0 | ||||
| MWDM2L-15P-4E7-48K | Glenair Inc | 0 | ||||
| MWDM2L-31CS-8E7-4K | Glenair Inc | 0 | ||||
| MWDM2L-37S-6E7-4S1 | Glenair Inc | RoHS : Compliant | 0 | |||
| MWDM6L-25S-4E7-48P | Glenair Inc | 0 | ||||
| E74496-013 | TE Connectivity | POLJ-24/1X240-400 | 0 | |||
| E747163001 | TE Connectivity | VG-95218-T028-D016CK3100 RoHS : Compliant | 0 | |||
| RJE741888120A | Amphenol Commercial | SINGLE PORT MODULAR JACK - VER | 0 | |||
| RJHSE7466 | Amphenol Commercial | 6P6C, RA, SHIELD, WITH LEDS | 0 | |||
| MWDM1L-31S-6E7-40S | Glenair Inc | 0 | ||||
| RJE741881310A | Amphenol Commercial | 8P8C, VERTICAL, SHIELD, SINGLE | 0 | |||
| RJHSE746N | Amphenol Commercial | 6P6C, RA, SHIELD, WITH LEDS | 0 | |||
| UE27AE7410H | Amphenol Commercial | USB, TYPE A, VERTICAL, HG |
| 0 | ||
| MWDM6L-51S-4E7-48M | Glenair Inc | 0 | ||||
 PEI Genesis | 8D025J46PE747 | SOURIAU-SUNBANK |
| 0 | ||
| 8D725W46PE747 | SOURIAU-SUNBANK |
| 0 | |||
| FFA.0E.740.CNS | LEMO connectors |
| 0 | |||
| FFA.1E.745.CNS | LEMO connectors |
| 0 | |||
| 8D719ZC18PE747 | SOURIAU-SUNBANK |
| 0 | |||
| RJE741AA1310 | Amphenol Corporation |
| 0 | |||
| 8D519Z18SE747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D525ZC46PE747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D519ZC18SE747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D019F18PE747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D525M46PE747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D525Z46PE747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D719F18PE747 | SOURIAU-SUNBANK |
| 0 | |||
| RJE741881310H | Amphenol Corporation |
| 0 | |||
| 8D025M46SE747 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | E74832-000 | TE Connectivity | shrink tube RoHS : Compliant |
| 3,564 | |
| RJHSE7440 | Amphenol Corporation | Connector |
| 871 | ||
| UE27AE7410H | Amphenol Corporation | Connector |
| 622 | ||
| RJE741881411A | Amphenol Corporation | Connector |
| 434 | ||
| E74619-000 | TE Connectivity | shrink tube RoHS : Compliant |
| 271 | ||
| FFA.0E.740.CNS | LEMO connectors | COLLET 0K DIAM 3.6 - 4 |
| 50 | ||
| 2500H11E746 | Eaton Cutler-Hammer | Midsize AC rated Rocker |
| 49 | ||
| E74832-000 | TE Connectivity | DISCRETE WIRE TERM RoHS : Compliant |
| 25 | ||
| FFA.1E.745.CNS | LEMO connectors | COLLET 1K DIAM 4.1 - 4 |
| 21 | ||
| FFA.1E.740.CNS | LEMO connectors | COLLET 1K DIAM 3.6 - 4 |
| 4 | ||
| FFA.0E.745.CNS | LEMO connectors | COLLET 0K DIAM 4.1 - 4 |
| 4 | ||
| AAE7414-00 | TE Connectivity | Dust Cover |
| 3 | ||
 Richardson RFPD | 550CE74M2500DG | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) 15pF C RoHS : Compliant |
| 0 | |
| 595BE74M2500DGR | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) LVDS 5 RoHS : Compliant |
| 0 | ||
| 595CE74M2500DGR | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) 15pF C RoHS : Compliant |
| 0 | ||
| 595CE74M2500DG | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) 15pF C RoHS : Compliant |
| 0 | ||
| 550CE74M1758DGR | Skyworks Solutions Inc | Oscillator VCXO 74.1758MHz ±20ppm (Stability) 15pF RoHS : Compliant |
| 0 | ||
| 595CE74M1758DGR | Skyworks Solutions Inc | Oscillator VCXO 74.1758MHz ±20ppm (Stability) 15pF RoHS : Compliant |
| 0 | ||
| E7415LF | Rakon Limited | Pluto Ultra Stable SMD TCVCXO RoHS : Compliant | 0 | |||
| 550CE74M2500DGR | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) 15pF C RoHS : Compliant |
| 0 | ||
| 550CE74M1758DG | Skyworks Solutions Inc | Oscillator VCXO 74.1758MHz ±20ppm (Stability) 15pF RoHS : Compliant |
| 0 | ||
| 550AE741M746DG | Skyworks Solutions Inc | Oscillator VCXO 741.746MHz ±20ppm (Stability) LVPE RoHS : Compliant |
| 0 | ||
| E7438LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| E7483LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 550AE741M746DGR | Skyworks Solutions Inc | Oscillator VCXO 741.746MHz ±20ppm (Stability) LVPE RoHS : Compliant |
| 0 | ||
| 595CE74M1758DG | Skyworks Solutions Inc | Oscillator VCXO 74.1758MHz ±20ppm (Stability) 15pF RoHS : Compliant |
| 0 | ||
| 595BE74M2500DG | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) LVDS 5 RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | TCE74-510NF | Eurofarad | INSTOCK | 1,538 | ||
| WE-742792113 | Wurth Elektronik | INSTOCK | 92 | |||
| PE 74 | INSTOCK | 86 | ||||
| WE74279244 | Wurth Elektronik | INSTOCK | 10 | |||
| NE74020C | INSTOCK | 10 | ||||
 Avnet Abacus | RJE74-1AA-1410-A | Amphenol Corporation | Modular Connector Modular Jack 1 x 1 Port 10P10C Through Hole Mount (Alt: RJE74-1AA-1410-A) RoHS : Compliant | 1,680 | ||
| E74619-000 | TE Connectivity | (Alt: E74619-000) RoHS : Compliant | 0 | |||
| 653E7425C3T | CTS Corporation | - Tape and Reel (Alt: 653E7425C3T) RoHS : Compliant | 0 | |||
| 653E74A5I2T | CTS Corporation | - Tape and Reel (Alt: 653E74A5I2T) RoHS : Compliant | 0 | |||
| 637E74A3I3T | CTS Corporation | - Tape and Reel (Alt: 637E74A3I3T) RoHS : Compliant | 0 | |||
| 637E7422I3T | CTS Corporation | - Tape and Reel (Alt: 637E7422I3T) RoHS : Compliant | 0 | |||
| 653E74A5I3T | CTS Corporation | - Tape and Reel (Alt: 653E74A5I3T) RoHS : Compliant | 0 | |||
| 653E7426C3T | CTS Corporation | - Tape and Reel (Alt: 653E7426C3T) RoHS : Compliant | 0 | |||
| 656E7423I3T | CTS Corporation | - Tape and Reel (Alt: 656E7423I3T) RoHS : Compliant | 0 | |||
| 637E74A3C3T | CTS Corporation | - Tape and Reel (Alt: 637E74A3C3T) RoHS : Compliant | 0 | |||
| 653E7425I2T | CTS Corporation | - Tape and Reel (Alt: 653E7425I2T) RoHS : Compliant | 0 | |||
| 637E7423I2T | CTS Corporation | - Tape and Reel (Alt: 637E7423I2T) RoHS : Compliant | 0 | |||
| B41570E7479Q | TDK Corporation | Electrolytic Capacitor 47000uF 40V 10 30 Screw (Alt: B41570E7479Q000) RoHS : Compliant | 0 | |||
| RJE74-188-1310-H | Amphenol Corporation | RJ45 Vertical 1x1 8p8c Shielded 30u Au High Temp TR - Tape and Reel (Alt: RJE74-188-1310-H) RoHS : Compliant | 0 | |||
| LBAD0ZZ1SE-743SMP | Murata Manufacturing Co Ltd | Highly Integrated MCU eSIM and LTEMNB1 modem (Alt: LBAD0ZZ1SE-743SMP) RoHS : Compliant | 0 | |||
Avnet Asia | RJE741AA1310 | Amphenol Corporation | (Alt: RJE741AA1310) RoHS : Compliant | 0 | ||
| M55342K12B3E74RTSV | Vishay Intertechnologies | SMD Chip Resistor, 3.74 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B3E74RTSV) RoHS : Compliant | 0 | |||
| GPCE743614114HR | Amphenol Corporation | (Alt: GPCE743614114HR) RoHS : Compliant | 0 | |||
SIT9120AI-2B3-25E74.250000E | SiTime Corporation | Silicon Oscillator 74.25MHz 2.5V 4-Pin QFN T/R (Alt: SIT9120AI-2B3-25E74.250000E) RoHS : Compliant | 0 | |||
| SIT8924BA-18-18E-74.250000D | SiTime Corporation | (Alt: SIT8924BA-18-18E-74.250000D) RoHS : Not Compliant | 0 | |||
 Avnet Silica | EA60E74A | Microchip Technology Inc | PIC32CZ CA70 Cur Ult EA (Alt: EA60E74A) RoHS : Not Compliant | 0 | ||
| SIT9346AE-2BFA25E74.25000 | SiTime Corporation | SiT9346 40 to 105C 1 MHz to 220 MHz Endura Series Ultralow Jitter Differential Oscillator 2 (Alt: SIT9346AE-2BFA25E74.25000) RoHS : Compliant | 0 | |||
| SIT9121AI-2C2-33E74.250000 | SiTime Corporation | SIT9121 IHigh Performance Differential Oscillator 33V10 74250000MHz (Alt: SIT9121AI2C233E74.250000) RoHS : Compliant | 0 | |||
SIT1602BI-13-33E-74.250000G | SiTime Corporation | (Alt: SIT1602BI-13-33E-74.250000G) RoHS : Compliant | 0 | |||
| SIT1602BC-13-33E-74.250000G | SiTime Corporation | (Alt: SIT1602BC-13-33E-74.250000G) RoHS : Compliant | 0 | |||
| SIT1602BC-12-18E-74.250000E | SiTime Corporation | (Alt: SIT1602BC-12-18E-74.250000E) RoHS : Compliant | 0 | |||
| SIT9346AE-2BFA25E74.250000E | SiTime Corporation | SiT9346 40 to 105C 1 MHz to 220 MHz Endura Series Ultralow Jitter Differential Oscillator 7 (Alt: SIT9346AE-2BFA25E74.250000E) RoHS : Compliant | 0 | |||
| SIT1602BI-13-33E-74.250000D | SiTime Corporation | Silicon Oscillator 7425MHz 33V 15pF 4Pin QFN TR (Alt: SIT1602BI-13-33E-74.250000D) RoHS : Compliant | 0 | |||
SIT1602BI-21-18E-74.250000G | SiTime Corporation | (Alt: SIT1602BI-21-18E-74.250000G) RoHS : Compliant | 0 | |||
| SIT1602BI-13-33E-74.250000E | SiTime Corporation | Silicon Oscillator 7425MHz 33V 15pF 4Pin QFN TR (Alt: SIT1602BI-13-33E-74.250000E) RoHS : Compliant | 0 | |||
| SIT9120AI-2B3-33E74.250000G | SiTime Corporation | Silicon Oscillator 7425MHz 33V 4Pin QFN TR (Alt: SIT9120AI-2B3-33E74.250000G) RoHS : Compliant | 0 | |||
| SIT1602BC-13-33E-74.250000E | SiTime Corporation | Silicon Oscillator 7425MHz 33V 15pF 4Pin QFN TR (Alt: SIT1602BC-13-33E-74.250000E) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ASE7-48.000MHZ-LC-T | Abracon Corporation |
| 0 | ||
| ASE7-40.000MHZ-LC-T | Abracon Corporation |
| 0 | |||
| ASE7-48.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
| ASE7-40.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | B45196E7475K409 | TDK Electronics | 35 | |||
 Component Electronics, Inc | NTE74LS138 | NTE Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 97 | |
| M55342K02B1E74S | IN STOCK SHIP TODAY |
| 35 | |||
| NTE74154 | NTE Electronics Inc | IN STOCK SHIP TODAY |
| 18 | ||
| NTE74S188 | NTE Electronics Inc | IN STOCK SHIP TODAY |
| 14 | ||
| NTE7483 | NTE Electronics Inc | IN STOCK SHIP TODAY |
| 1 | ||
 EBV Elektronik | TLE7469GV52AUMA1 | Infineon Technologies AG | (Alt: SP000316703) RoHS : Compliant | 0 | ||
| TLE7469GV53AUMA1 | Infineon Technologies AG | Fixed LDO Voltage Regulator AECQ100 42V to 55V 300mV Dropout 5V215mA out SOIC12 (Alt: SP000316704) RoHS : Compliant | 0 | |||
| SVITLE7469GV52AUMA1 | Infineon Technologies AG | (Alt: SP000316703) RoHS : Compliant | 0 | |||
 FDH Electronics | MWDM1L-37P-6E7-48B | Glenair Inc | Connector MIL M | 0 | ||
| MWDM2L-100CS-6E7-4B | Glenair Inc | Connector | 0 | |||
| MWDM2L-15P-4E7-48K | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-31CS-8E7-4K | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-37S-6E7-4S1 | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM6L-25S-4E7-48P | Glenair Inc | Connector MIL M | 0 | |||
| MWDM1L-31S-6E7-40S | Glenair Inc | Connector | 0 | |||
| MWDM6L-51S-4E7-48M | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-9P-6E7-48S1 | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM6L-37S-4E7-48P | Glenair Inc | Connector MIL M | 0 | |||
| MWDM1L-100P-6E7-48B | Glenair Inc | Connector MIL M | 0 | |||
| MWDM6L-100P-4E7-48M | Glenair Inc | Connector MIL M | 0 | |||
| MWDM1L-25S-6E7-48B | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-25CS-4E7-48B | Glenair Inc | Connector | 0 | |||
| MWDM2L-25P-6E7-40S1 | Glenair Inc | Connector MIL M | 0 | |||
 Master Electronics | E74142-000 | TE Connectivity | WP-508254-5-9 RoHS : Compliant |
| 57,172 | |
| UE27AE7410H | Amphenol Communications Solutions | USB STD A RECEP VT 30U AU HIGH TEMP RoHS : Compliant |
| 0 | ||
| E74619-000 | TE Connectivity | SO175-5-55-22-95 RoHS : Compliant |
| 0 | ||
| SBCHE7470RJ | TE Connectivity | SBCHE7 470R 5% Ceramic Cased Power Resistors Fixed Resistor MOQ Reduction RoHS : Compliant |
| 0 | ||
| 27E740 | TE Connectivity | Relay Sockets & Fixings-SOCKET-4 POLES MOQ Reduction RoHS : Compliant |
| 0 | ||
| AXE744127 | Panasonic Electronic Components | A35S(0.35mm pit RoHS : Compliant |
| 0 | ||
| BJE-74 | TE Connectivity | BJE 74 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3E7425-000 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| AAE7411-00 | TE Connectivity | EN3660-062W25D MOQ Reduction RoHS : Compliant |
| 0 | ||
| AXE740127 | Panasonic Electronic Components | A35S(0.35mm pit RoHS : Compliant |
| 0 | ||
| RE74-TB | Thomas & Betts | Reducing Bushing - 2-1/2 Inch .. 1-1/4 Inch - Material Steel - Zinc Plated Finish - Explosionproof RoHS : Compliant |
| 0 | ||
| AAE7489-00 | TE Connectivity | EN3660-062W13B MOQ Reduction RoHS : Compliant |
| 0 | ||
| RJHSE7440 | Amphenol Communications Solutions | Single port 6P4C R/A shielded Tab up without RoHS : Compliant |
| 0 | ||
| E74D300LPN183TA92M | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| AXE740127A | Panasonic Electronic Components | A35S(0.35mm pit RoHS : Compliant |
| 0 | ||
 Neutron USA | DEE7-41D | Banner Engineering Corp | Cordset, Str M12 F 4p to Str M12 M 4p, 0.31m, PVC Yellow, 17140 |
| 19 | |
| E74000 | ifm efector inc | 2 Core EPR Sheath Actuator/Sensor Cable, 1.5 mmsq CSA, AS-Interface flat cable |
| 2 | ||
| QS30VR3RE-74180 | Banner Engineering Corp | Banner Engineering QS30VR3RE-74180 Photoelectric, QS30 VR3RE-74180 Kit |
| 1 | ||
| XCSE741214 | Telemechanique Sensors | Interlock Switches SAFETY INTERLOCK SWITCH +OPTIONS |
| 1 | ||
| PCIE-7432 | ADLINK Technology Inc | Datalogging & Acquisition PCIe-7432 32-CH digital input and 32-CH digital output card that provide a robust 2,500V isolation protection. |
| 0 | ||
| LTE7461N | Zyxel Communications Corporation | M602 4G LTE-A OUTDOOR ROUTER COMP W/ AT&T & VERIZON NEBULAFLEX |
| 0 | ||
 Pasternack Enterprises US | PE7421-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.2:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Male to N Female Directional Black Anodized Aluminum Heatsink Body Rated to 100 Watts Up to 4 GHz. PE7421-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7421-40 40 dB attenuator is rated for up to 4 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7421-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 15 | |
| PE7438-10 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 4 GHz, Impedance: 75 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 10 dB, Connector Series 1: BNC, Connector Gender 1: Male, Connector Series 2: BNC, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 10dB 75ohm fixed attenuator BNC plug to BNC jack 4GHz rated 2 watt. PE7438-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. The Pasternack PE7438-10 10 dB attenuator is rated for up to 4 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7438-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 12 | ||
| PE7430-12 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 12 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 12 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7430-12 is a fixed 12 dB attenuator from Pasternack. This 12dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7430-12 12 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7430-12 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 12dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 10 | ||
| PE7466-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 40 dB, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -50 deg C. 40 dB RF Fixed Attenuator 2W, DC to 12GHz, SMA Male to SMA Female, Stainless Steel. PE7466-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7466-40 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 40 dB attenuator has a passivated stainless steel connector built with plating. Our fixed RF attenuator PE7466-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 8 | ||
| PE7467-9 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 9 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Male, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 9 dB Fixed Attenuator, SMA Male to SMA Female Brass Body Rated to 2 Watts, DC to 12 GHz. The PE7467-9 is a fixed 9 dB attenuator from Pasternack. This 9 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7467-9 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our radio frequency attenuator with SMA connectors is constructed with brass body material. This passive conectorized radio frequency attenuator has 0 dBc typical passive intermodulation. The conectorized bi-directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a female gender on side 1 and a SMA male connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 9 dB. The Pasternack PE7467-9 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, WiFi 6E and 5G cellular bands applications. The attenuator has a 1.35:1 connector built with 1.35:1 plating. Our fixed RF attenuator PE7467-9 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 9 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 6 | ||
| PE7427-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.35:1, Attenuation: 30 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated to 50 Watts Up to 18 GHz. PE7427-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7427-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7427-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 5 | ||
| PE7487-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator, SMA Male to SMA Female Brass Gold Body Rated to 2 Watts Up to 26.5 GHz. PE7487-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with brass body material and gold plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 1 dB. The Pasternack PE7487-1 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 1 dB attenuator has a brass connector built with gold plating. Our fixed RF attenuator PE7487-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7449-30 | Pasternack Enterprises | Key Specifications, Design: DC Bias, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 30 dB, Connector Series 1: TNC, Connector Gender 1: Male, Connector Series 2: TNC, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 30dB DC Bias Attenuator, TNC Male to TNC Female Brass Tri-Metal Body Rated to 2 Watts from 100MHz to 3 GHz. PE7449-30 is a fixed DC Bias attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This fixed DC Bias attenuator has a maximum input VSWR of 1.35:1 and a body made up of brass. The Pasternack TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. PE7449-30 30 dB attenuator is rated for up to 3 GHz. This attenuator is rated to 2 Watts at the stated attenuation. Our male 50 Ohm radio frequency attenuator is built with tri-metal body plating. Our TNC 30 dB attenuator from Pasternack is suitable for instrumentation, prototyping and characterization, radar and RF test system applications. The PE7449-30 RF attenuator is rated to handle a maximum DC voltage of 100 Volts and a current of 0.1 Amps. Our fixed RF attenuator PE7449-30 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal high-quality DC Bias attenuator with that meets your requirements. |
| 3 | ||
| PE7471-8 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 8 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Aluminum, Connector-In Series: 3.5mm, Connector-In Gender: Male, Connector-Out Series: 3.5mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 8 dB Fixed Attenuator, 3.5mm Male to 3.5mm Female Aluminum Body Rated to 2 Watts Up to 26.5 GHz. PE7471-8 is a fixed 8 dB attenuator from Pasternack. This 8 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 3.5mm connectors is constructed with aluminum body material. The attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 8 dB fixed attenuator has a gold-plated brass inner conductor. This 3.5mm attenuator has a male gender on side 1 and a 3.5mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 8 dB. The Pasternack PE7471-8 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 8 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7471-8 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 8 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7429-1 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.35:1, Attenuation: 1 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 1 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7429-1 is a fixed 1 dB attenuator from Pasternack. This 1dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7429-1 1 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7429-1 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 1dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 2 | ||
| PE7430-9 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 9 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 9 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7430-9 is a fixed 9 dB attenuator from Pasternack. This 9dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7430-9 9 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7430-9 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 9dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 2 | ||
| PE7483-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 2 dB, Input Power, Max (CW): 100 Watts, Body Material: Black Anodized Aluminum Heatsink, Connector-In Series: 4.3-10, Connector-In Gender: Female, Connector-Out Series: 4.3-10, Connector-Out Gender: Female, Max Operating Temperature: 75 deg C, Min Operating Temperature: -40 deg C. Low PIM 10dB Fixed Attenuator 4.3-10 female to 4.3-10 female Black Anodized Aluminum Body to 100 Watts 0.6 GHz to 6 GHz. The PE7483-10 is a low PIM fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This low PIM threaded RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7483-10 fixed attenuator is available with a typical attenuation accuracy of 2 dB. The max input power rating (CW) of this RF attenuator is 100 Watts. Our low PIM radio frequency attenuator with 4.3-10 connectors is constructed with black anodized aluminum heatsink body material. This passive connectorized radio frequency attenuator has -160 dBc typical passive intermodulation. The connectorized directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 4.3-10 attenuator has a female gender on side 1 and a 4.3-10 female connector on side 2. Our low PIM RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7483-10 attenuator is rated for frequency range between 600 MHz to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The attenuator has a black anodized aluminum heatsink 4.3-10 connector with gold-plated beryllium copper contact. Our fixed RF attenuator PE7483-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7428-02 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.2:1, Attenuation: 2 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 2 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 6 GHz. PE7428-02 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7428-02 2 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7428-02 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
| PE7463-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 10 Watts Up to 12.4 GHz. PE7463-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7463-3 in-series fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7463-3 3 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7463-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement. |
| 0 | ||
| PE7437-6 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.25:1, Attenuation: 6 dB, Connector Series 1: BNC, Connector Gender 1: Male, Connector Series 2: BNC, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 6dB 50ohm fixed attenuator BNC plug to BNC jack 4GHz rated 2 watt. PE7437-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. The Pasternack PE7437-6 6 dB attenuator is rated for up to 4 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7437-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
 TE Connectivity | SBCHE74K7J | TE Connectivity | SBCHE7 4K7 5% Resistance Value: 4.7K Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Wirewound Resistor: Vertical Mount | 4.7K Ω Wire Wound Power Resistor 5 % | Part Number: SBCHE74K7J | Internal Number: 1-1623733-2 | TE Connectivity RoHS : Compliant |
| 974 | |
| SBCHE7470RJ | TE Connectivity | SBCHE7 470R 5% Resistance Value: 470 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Wirewound Resistor: Vertical Mount | 470 Ω Wire Wound Power Resistor 5 % | Part Number: SBCHE7470RJ | Internal Number: 1623733-9 | TE Connectivity RoHS : Compliant |
| 902 | ||
 Venkel Ltd. | UPTF1206-8W-E-7411AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;25PPM;7.41K;�0.05% RoHS : Compliant | 0 | ||
| TFCR0603-10W-E-7411CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;7.41K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-7411DT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;7.41K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-7411DT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;7.41K;�0.5% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-7411DT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;7.41K;�0.5% RoHS : Compliant | 0 | |||
| UPTF2010-2W-E-7413AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�25PPM;741K ;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-7410DT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;741R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-7411FT | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;7.41K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7410BT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;741R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7412CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;74.1K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-7412FT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;74.1K;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-7410FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;741R;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-7411FT | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;7.41K;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-74R1FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;74.1R;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-7412DT | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;74.1K;�0.5% RoHS : Compliant | 0 | |||
 Vyrian | PAFE7422ABJ | Texas Instruments | Analog Circuit | 9,585 | ||
| NTE74LS00 | NTE Electronics Inc | NAND Gate, LS Series, 4-Func, 2-Input, TTL, PDIP14 RoHS : Compliant | 9,144 | |||
COP8SGE740N8XXX | Texas Instruments | Microcontroller, 8-Bit, OTPROM, 15MHz, CMOS, PDIP40 RoHS : Not Compliant | 9,067 | |||
AFE7422IABJ | Texas Instruments | Analog Circuit, 1 Func, 2 Channel, PBGA400 RoHS : Compliant | 8,152 | |||
| COP8SGE740N7XXX | Texas Instruments | Microcontroller, 8-Bit, OTPROM, 10MHz, CMOS, PDIP40 | 7,437 | |||
AFE7444IALK | Texas Instruments | Analog Circuit, 1 Func, 4 Channel RoHS : Not Compliant | 4,707 | |||
| COP8SGE744V7XXX | Texas Instruments | Microcontroller, 8-Bit, OTPROM, 10MHz, CMOS, PQCC44 | 3,540 | |||
| NTE74LS259 | NTE Electronics Inc | Logic Circuit | 832 | |||
| NTE74LS136 | NTE Electronics Inc | XOR Gate, LS Series, 4-Func, 2-Input, TTL, PDIP14 | 798 | |||
| NTE74LS327 | NTE Electronics Inc | Memory IC | 783 | |||
| NTE74LS245 | NTE Electronics Inc | Bus Transceiver, LS Series, 1-Func, 8-Bit, True Output, TTL, PDIP20 RoHS : Compliant | 672 | |||
| NTE74LS145 | NTE Electronics Inc | Decimal Decoder/Driver, LS Series, Inverted Output, TTL, PDIP16 | 609 | |||
| NTE74LS132 | NTE Electronics Inc | NAND Gate, LS Series, 4-Func, 2-Input, TTL, PDIP14 | 550 | |||
| NTE74LS133 | NTE Electronics Inc | NAND Gate, LS Series, 1-Func, 13-Input, TTL, PDIP16 | 489 | |||
| NTE74LS160A | NTE Electronics Inc | Decade Counter, LS Series, Synchronous, Positive Edge Triggered, 4-Bit, Up Direction, TTL, PDIP16 RoHS : Compliant | 351 | |||
 Win Source Electronics | TLE7469GV52 | Infineon Technologies AG | IC REG LINEAR VOLT TLE7469 RoHS : Compliant |
| 10,000 | |
| TLE7469GV52AUMA1 | Infineon Technologies AG | IC REG LINEAR 2.6V/5V DSO-12 / Linear Voltage Regulator IC Positive Fixed 2 Output 200mA, 215mA PG-DSO-12-11 RoHS : Compliant |
| 9,280 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British