E75ZPX-R Price, Distributor, Stock

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 1 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 1 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-1 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 1 dB. The Pasternack PE7520-1 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 1 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $62.09
25 : $59.61
50 : $57.74
100 : $56.5

PE7512-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-10 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7512-10 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $556.99
5 : $545.85
10 : $534.71
25 : $523.57

PE7512-3

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-3 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7512-3 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $556.99
5 : $545.85
10 : $534.71
25 : $523.57

PE7533-30

Pasternack Enterprises

Key Specifications, Design: Continuously Variable, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 30 dB, Step Type: Dial. 0 to 30 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 4 GHz to 8 GHz. PE7533-30 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7533-30 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7533-30 variable attenuator has a maximum attenuation of 30 dB. This microwave RF variable attenuator has a frequency range of 4 GHz to 8 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2 inches, a width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 30 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7533-30 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements.

1 : $2,140.0
5 : $2,097.2
10 : $2,054.4
25 : $2,011.6

PE7511-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7511-30 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,350.0
5 : $1,323.0
10 : $1,296.0
25 : $1,269.0

PE7513-20

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 20 Watts Up to 40 GHz. PE7513-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 2 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7513-20 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7513-20 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7513-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,430.0
5 : $1,401.4
10 : $1,372.8
25 : $1,344.2

PE7511-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7511-10 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,030.0
5 : $1,009.4
10 : $988.8
25 : $968.2

PE7580-3

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-3 fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7580-3 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 3 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $387.99
5 : $380.23
10 : $372.47
25 : $364.71

PE7513-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 20 Watts Up to 40 GHz. PE7513-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 2 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7513-30 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7513-30 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7513-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,430.0
5 : $1,401.4
10 : $1,372.8
25 : $1,344.2

PE7513-40

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 20 Watts Up to 40 GHz. PE7513-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 2 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7513-40 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7513-40 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7513-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,630.0
5 : $1,597.4
10 : $1,564.8
25 : $1,532.2

PE7501-20

Pasternack Enterprises

Key Specifications, Design: Continuously Variable, Maximum Frequency: 14.5 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 10.7 GHz to 14.5 GHz. PE7501-20 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7501-20 variable attenuator has a maximum attenuation of 20 dB. This microwave variable attenuator has a frequency range of 10.7 GHz to 14.5 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 1.5 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7501-20 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements.

1 : $2,460.0
5 : $2,410.8
10 : $2,361.6
25 : $2,312.4

PE7511-6

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7511-6 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,050.0
5 : $1,029.0
10 : $1,008.0
25 : $987.0

PE7580-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-30 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7580-30 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $387.99
5 : $380.23
10 : $372.47
25 : $364.71

PE7510-6

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7510-6 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $530.99
10 : $520.37
25 : $509.75
100 : $499.13

PE7582-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 150 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 150 Watts Up to 10 GHz. PE7582-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7582-30 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 150 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7582-30 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7582-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $845.99
5 : $829.07
10 : $812.15
25 : $795.23

Venkel Ltd.

HPTF0603-QE-7500AT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�25PPM;750R;�0.05%
RoHS : Compliant

HPTF0805-TE-7500BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�25PPM;750R;�0.1%
RoHS : Compliant

HPTF1206-UE-7503FT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;750K ;�1%
RoHS : Compliant

HPTF1210-UE-7500FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�25PPM;750R;�1%
RoHS : Compliant

HPTF2010-UE-7501FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;7.5K;�1%
RoHS : Compliant

MELFC0204-ZE-7501CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;7.5K;�0.25%
RoHS : Compliant

MELFC0207-XE-7503DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;750K;�0.5%
RoHS : Compliant

MELFM0204-TE-7500BT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;750R;�0.1%
RoHS : Not Compliant

MELFM0207-VE-7501BT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;7.5K;�0.1%
RoHS : Not Compliant

HPTF0805-RE-7500AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�25PPM;750R;�0.05%
RoHS : Compliant

HPTF1206-TE-7502AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�25PPM;75K;�0.05%
RoHS : Compliant

HPTF1206-UE-75R0DT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;75R;�0.5%
RoHS : Compliant

HPTF1210-UE-7501DT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�25PPM;7.5K;�0.5%
RoHS : Compliant

HPTF2010-UE-7502DT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;75K;�0.5%
RoHS : Compliant

MELFC0204-ZE-7502FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;75K;�1%
RoHS : Compliant

Vyrian

TWAE757M060CBEZ0700

KYOCERA AVX

Tantalum Capacitor, Polarized, Tantalum (wet), 60V, 20% +Tol, 20% -Tol, 750uF, Through Hole Mount

16,810

ADE7566ASTZF16

Analog Devices Inc

Analog Circuit, 1 Func
RoHS : Compliant

11,824

ADE7566ACPZF16

Analog Devices Inc

Analog Circuit, 1 Func
RoHS : Compliant

11,599

TLE75602EMDXUMA1

Infineon Technologies AG

Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24
RoHS : Compliant

9,112

ADE7569ACPZF16-RL

Analog Devices Inc

Analog Circuit, 1 Func
RoHS : Compliant

8,802

TP6KE75CA

Littelfuse Inc

Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC
RoHS : Compliant

5,975

EP4CE75F23I7N

Intel / Altera

Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484

3,066

EP4CE75F29C8

Intel / Altera

Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA780

2,912

EP4CE75F23C7N

Intel Corporation

Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484
RoHS : Compliant

2,238

EP4CE75F23I7

Intel / Altera

Field Programmable Gate Array, 4713 CLBs, 75408-Cell, PBGA484

2,059

EP4CE75F29

Intel Corporation

Field Programmable Gate Array, 47 CLBs, PBGA780

2,037

EP4CE75F23C8

Intel / Altera

Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484

1,839

EP4CE75F23C8N

Intel / Altera

Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484

1,541

RE75N3R01C02

Vishay Intertechnologies

Fixed Resistor, Wire Wound, 30W, 3.01ohm, 9.5026V, 1% +/-Tol, 50ppm/Cel, Chassis Mount
RoHS : Not Compliant

626

MSMCJLCE7.5AE3

Microsemi Corporation (now Microchip)

Trans Voltage Suppressor Diode, 1500W, 7.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB
RoHS : Compliant

482

Win Source Electronics

TLE75602-ESH?INFINEON

Infineon Technologies AG

Switches & Controller

150 : $2.0112
112 : $2.2433
87 : $2.3207
63 : $2.398
41 : $2.4754
17 : $3.0168

15,000

TLE75080ESH

Infineon Technologies AG

8-Channel High-Side Switch Automotive 24-TSDSO

138 : $2.1833
103 : $2.4352
80 : $2.5191
58 : $2.6031
38 : $2.6871
16 : $3.2749

11,462

TLE75602-ESH

Infineon Technologies AG

8 330mA TSDSO-24 Power Distribution Switches, Load Drivers RoHS
RoHS : Compliant

150 : $2.2525
112 : $2.5125
87 : $2.5992
63 : $2.6858
41 : $2.7724
17 : $3.3788

10,000

TLE75008ESDXUMA1

Infineon Technologies AG

IC PWR DRVR N-CHAN 1:8 TSDSO-24
RoHS : Compliant

44 : $6.894
33 : $7.6894
26 : $7.9546
19 : $8.2197
12 : $8.4849
5 : $10.341

9,560

TLE75602ESHXUMA1

Infineon Technologies AG

IC PWR DRVR N-CHAN 1:8 TSDSO-24 / Power Switch/Driver 1:8 N-Channel 330mA PG-TSDSO-24-21
RoHS : Compliant

151 : $2.2357
113 : $2.4937
87 : $2.5797
64 : $2.6657
41 : $2.7516
17 : $3.3535

8,347

TLE75602-ESD

Infineon Technologies AG

Switches & Controller
RoHS : Compliant

34 : $8.9313
26 : $9.9619
20 : $10.3054
15 : $10.6489
10 : $10.9924
4 : $13.397

3,000

TLE75242-ESD

Infineon Technologies AG

16 bit Multichannel SPI Switches & Controller
RoHS : Compliant

155 : $2.1731
116 : $2.4239
90 : $2.5076
65 : $2.5911
42 : $2.6747
18 : $3.2598

3,000

TLE75080ESHXUMA1

Infineon Technologies AG

IC PWR DRVR N-CHAN 1:8 TSDSO-24
RoHS : Compliant

175 : $1.7148
131 : $1.9126
102 : $1.9786
74 : $2.0445
48 : $2.1105
20 : $2.5721

2,316

EP4CE75F23C8N

Altera Corporation

IC FPGA 292 I/O 484FBGA
RoHS : Compliant

5 : $70.8182
4 : $73.697
3 : $76.5758
2 : $82.3334
1 : $85.2122

2,000

EP4CE75F23I7N

Altera Corporation

IC FPGA 292 I/O 484FBGA
RoHS : Compliant

7 : $46.591
6 : $48.4849
4 : $50.3788
3 : $54.1667
2 : $56.0607
1 : $59.8485

1,680

EP4CE75F29I7N

Intel Corporation

IC FPGA 426 I/O 780FBGA / series Field Programmable Gate Array (FPGA) IC 426 2810880 75408 780-BGA
RoHS : Compliant

2 : $193.0304
1 : $215.3031

1,042

EP4CE75F23C6

Altera Corporation

IC FPGA 292 I/O 484FBGA
RoHS : Not Compliant

1 : $434.627

623

EP4CE75U19I7N

Intel Corporation

IC FPGA 292 I/O 484UBGA
RoHS : Compliant

1 : $393.9394

252

EP4CE75F29I7

Intel Corporation

IC FPGA 426 I/O 780FBGA
RoHS : Not Compliant

3 : $156.1561
3 : $156.1561
2 : $174.1741
2 : $174.1741
1 : $180.18
1 : $180.18

E75ZPX-R Distributor

Link URL