 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
P24Z2BD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | D25P24A6RX09LF | Amphenol Corporation | Connector: D-Sub; PIN: 25; plug; male; data transfer; straight |
| 720 | |
| D50P24A6GX00LF | Amphenol Corporation | Connector: D-Sub; PIN: 50; plug; male; data transfer; straight |
| 120 | ||
| DP-241-5-16L | Bel Power Solutions | Transformer: encapsulated; 16V; 800mA; 71.4x36.3x42.9mm |
| 21 | ||
| DPP240-24-3 | TDK-Lambda Corporation | Power supply: switching; for DIN rail; 240W; 24VDC; 10A; -40÷71°C RoHS : Compliant |
| 1 | ||
| MAP 24 CP240 | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for double latch |
| 0 | ||
AM1P-240909DZ | Aimtec | Converter: DC/DC; 1W; Uout: 9VDC; Uout2: -9VDC; Iout: 56mA; DIP8; THT RoHS : Compliant |
| 0 | ||
| AM1P-2415DZ | Aimtec | Converter: DC/DC; 1W; Uout: 15VDC; Uout2: -15VDC; Iout: 33mA; DIP8 RoHS : Compliant |
| 0 | ||
| CAP 24 CS2 | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for double latch |
| 0 | ||
| CAP 24 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; with latch; high |
| 0 | ||
| CM1FP24J | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 24VDC; SPDT; 15A; CM; Rcoil: 320Ω |
| 0 | ||
| DIP24-2A72-21D | Standex-Meder Electronics | Relay: reed switch; Ucoil: 24VDC; DPST-NO; 1A; max.200VDC; 290mW |
| 0 | ||
| EA EDIP240J-7LAT | Display Visions (LEDs) | Display: LCD; graphical; 240x128; FSTN Positive; black; 113x70mm |
| 0 | ||
AP2411MP-13 | Diodes Incorporated | IC: power switch; high-side,USB switch; 2A; Ch: 1; P-Channel; SMD RoHS : Compliant |
| 0 | ||
| CB1RP24J | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 24VDC; SPDT; 20A; CB; Rcoil: 287.2Ω |
| 0 | ||
| DILM65-XSP(24V50/60HZ) | Eaton Corporation | Coil for contactors; 24VAC; DILM40,DILM50,DILM65,DILM72 |
| 0 | ||
 Avnet Americas | EVQ-P2402W | Panasonic Electronic Components | Tactile Switch, Top Actuated, Surface Mount, Rectangular Button, 240 gf, 20mA at 15VDC - Tape and Reel (Alt: EVQ-P2402W) RoHS : Compliant |
| 124,000 | |
| ECLAMP2454P.TCT | Semtech Corporation | - Tape and Reel (Alt: ECLAMP2454P.TCT) RoHS : Not Compliant |
| 12,000 | ||
TOP245R-TL | Power Integrations | - Tape and Reel (Alt: TOP245R-TL) RoHS : Not Compliant |
| 3,000 | ||
| 5KP24A-E3/54 | Vishay Intertechnologies | - Tape and Reel (Alt: 5KP24A-E3/54) RoHS : Compliant |
| 2,400 | ||
| 4816P-2-472LF | Bourns Inc | - Tape and Reel (Alt: 4816P-2-472LF) RoHS : Compliant |
| 2,000 | ||
| HLMP-2450 | Broadcom Limited | - Rail/Tube (Alt: HLMP-2450) RoHS : Compliant |
| 1,792 | ||
| TLP240A(D4,TP1,F | Toshiba America Electronic Components | Relay SSR 7.5mA 1.4V DC-IN 500mA 60V AC/DC-OUT 4-Pin SMD DIP Emboss T/R - Tape and Reel (Alt: TLP240A(D4,TP1,F) RoHS : Compliant |
| 1,500 | ||
| TOP244GN-TL | Power Integrations | - Tape and Reel (Alt: TOP244GN-TL) RoHS : Compliant |
| 1,000 | ||
| LD09P24A4GX00LF | Amphenol Corporation | - Trays (Alt: LD09P24A4GX00LF) RoHS : Compliant |
| 715 | ||
| WCP2400SQ1-17UFL | TE Connectivity | DIPOL,WCP,170MM,UFL - Bag (Alt: WCP2400SQ1-17UFL) RoHS : Compliant |
| 450 | ||
TOP242YN | Power Integrations | - Rail/Tube (Alt: TOP242YN) RoHS : Compliant |
| 299 | ||
| DP241-5-10A21 | Pulse Electronics Corporation | - Bulk (Alt: DP241-5-10A21) RoHS : Compliant |
| 257 | ||
| DF11-EP2428PC | Hirose Electric Co Ltd | - Bulk (Alt: DF11-EP2428PC) RoHS : Compliant |
| 100 | ||
| DPP240-24-1 | TDK Corporation | - Bulk (Alt: DPP240-24-1) RoHS : Compliant |
| 10 | ||
| RSP-2400-24 | Mean Well | - Boxed Product (Development Kits) (Alt: RSP-2400-24) RoHS : Compliant |
| 2 | ||
 Newark | RR0816P-242-D | Susumu Co Ltd | Chip Res Smd, 2K4, ±0.5%, 63Mw; |Susumu RR0816P-242-D RoHS : Compliant |
| 4,827 | |
| RR0816P-242-D | Susumu Co Ltd | Chip Res Smd, 2K4, ±0.5%, 63Mw; |Susumu RR0816P-242-D RoHS : Compliant |
| 4,827 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Dio, Transient, 50V, Bidirectional, 24V; |Semtech RCLAMP2431T.TCT RoHS : Compliant |
| 3,103 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Dio, Transient, 50V, Bidirectional, 24V; |Semtech RCLAMP2431T.TCT RoHS : Compliant |
| 3,103 | ||
| UJ32-21-C-H-G-MHMT-P24-TR | Same Sky | Usb Con, R/A 3.2 Typ C Rcpt, 24P, Smt/Th; |Same Sky UJ32-21-C-H-G-MHMT-P24-TR RoHS : Compliant |
| 1,000 | ||
| UJ32-21-C-H-G-HMT-LT-P24-TR | Same Sky | Usb Con, R/A 3.2 Typ C Rcpt, 24P, Smt/Th; |Same Sky UJ32-21-C-H-G-HMT-LT-P24-TR RoHS : Compliant |
| 995 | ||
| 0603HP-24NXJRW | Coilcraft Inc | Wirewound Inductor, 24Nh, 1.1A, 0603; |Coilcraft 0603HP-24NXJRW RoHS : Compliant |
| 985 | ||
| 0603HP-24NXJRW | Coilcraft Inc | Wirewound Inductor, 24Nh, 1.1A, 0603; |Coilcraft 0603HP-24NXJRW RoHS : Compliant |
| 985 | ||
| UJ40-32-C-H-G-SMT-P24-TR | Same Sky | Usb Conn, R/A, 4.0 Type C Rcpt, 24P, Smt; |Same Sky UJ40-32-C-H-G-SMT-P24-TR RoHS : Compliant |
| 898 | ||
MP2481DH-LF-P | Monolithic Power Systems | Led Driver, Buck, 1.4Mhz, Hmsop; |Monolithic Power Systems (Mps) MP2481DH-LF-P RoHS : Compliant |
| 554 | ||
| GRL18S-P2438 | SICK AG | Photo Sensor, 7.2 M, Pnp; |Sick GRL18S-P2438 RoHS : Compliant |
| 6 | ||
| WTB9-3P2411S14 | SICK AG | Photo Sensor, 800 Mm, Pnp; |Sick WTB9-3P2411S14 RoHS : Compliant |
| 5 | ||
| WL11-2P2432 | SICK AG | Photoelectric Sensor, 10 M, Pnp; |Sick WL11-2P2432 RoHS : Compliant |
| 2 | ||
| WTB11-2P2431 | SICK AG | Sensor, Proximity Diffuse, M12, 350Mm; |Sick WTB11-2P2431 RoHS : Compliant |
| 1 | ||
| P24 | Hubbell Wiring Device-Kellems | Wallplate, 2-G, 2) Strp Mt Blank Br; |Hubbell Wiring Devices P24 RoHS : Not Compliant |
| 0 | ||
 RS | IRFP244PBF | Vishay Intertechnologies | MOSFET, POWER, N-CH, VDSS 250V, RDS(ON) 0.28OHM, ID 15A, TO-247AC, PD 150W, VGS +/-20V RoHS : Compliant |
| 919 | |
| EP-243232 (EP243232) | Isostatic Industries Inc | SLEEVE BEARING, EP243232 1.504 X 2.005 X 2IN, POWDERED METAL BRONZE |
| 50 | ||
| EP-242816 (EP242816) | Isostatic Industries Inc | SLEEVE BEARING, EP242816 1.504 X 1.755 X 1IN, POWDERED METAL BRONZE |
| 30 | ||
| OD172SAP-24HHB10AZX (OD172SAP-24HHB10AZ) | Orion Fans | DC FAN,24V 172 X 150 X 51MM, REVERSIBLE FLOW |
| 10 | ||
| 2981431 (PSR-SPP- 24DC/ESD/5X1/1X2/300) | Phoenix Contact | SAFETY.RELAY, E-MECH, CUR-RTG 6 A (NO), 3 A (NC), CTRL-V 24DC, VOL-RTG 250AC/DC |
| 7 | ||
| E3FA-DP24 (E3FADP24) | OMRON Industrial Automation | INFRARED M18 PLSTC 100MM PNP |
| 4 | ||
| WL12-3P2451 (1041448) | SICK AG | PHOTOELECTRIC SENSOR, RETROREFLECTIVE, AUTOCOLLIMATION,0-1 M, RED,640 NM, PNP, M12 |
| 3 | ||
| NP2420C | Hubbell Wiegmann | INTERNAL PANEL, ULTIMATE, CARBON STEEL, 22.2X18.2 |
| 1 | ||
| N052-P24 | Tripp Lite | TRIPP LITE CAT5 / CAT5E POE PATCH PANEL 24-PORT 110 568A/B RJ45 1URM TAA |
| 1 | ||
| NP2424CG | Hubbell Wiegmann | INTERNAL PANEL, ULTIMATE, GALVANIZED 22.2X22.2 |
| 1 | ||
| 777354 (P2HZ X4P 24VAC 3N/O 1N/C) | Pilz International | HAND SAFETY RELAY, 24VDC 2NO 1NC, PNOZ SERIES |
| 1 | ||
| 2981499 (PSR-SPP- 24DC/SDC4/2X1/B) | Phoenix Contact | SAFETY.RELAY, 22.5MM, PLUGGABLE SPRINGCGETERM BLKS, 1/2 NC/1NO OR 1NC/1NO, 24VDC |
| 1 | ||
| P24 | Hubbell Wiring Device-Kellems | WALL PLATE, 2-G, 2 STRP MT BLANK, BR |
| 0 | ||
| P24 | Sprecher + Schuh | HEATER ELEMENT, FMS HEATER ELEMENT 3.32 FLA EUTECTIC |
| 0 | ||
| P24 | SERPAC Electronic Enclosures | ENCLOSURES, HANDHELD-YELLOW 3.958 X4.526X11.788 |
| 0 | ||
 STMicroelectronics | STP24NF10 | STMicroelectronics | N-channel 100 V, 55 mOhm typ., 26 A STripFET II Power MOSFET in a TO-220 package RoHS : Compliant |
| 4,939 | |
STP24DP05BTR | STMicroelectronics | 24-bit constant current LED sink driver with output error detection RoHS : Compliant |
| 3,966 | ||
| STSPIN9P24TR | STMicroelectronics | 75V high-current full-bridge advanced motor driver series |
| 987 | ||
| STP24N60M2 | STMicroelectronics | N-channel 600 V, 168 mOhm typ., 18 A MDmesh M2 Power MOSFET in a TO-220 package RoHS : Compliant |
| 639 | ||
| STP24NM60N | STMicroelectronics | N-channel 600 V, 168 mOhm tyo., 17 A MDmesh II Power MOSFET in a TO-220 package RoHS : Compliant |
| 621 | ||
| STP24N60DM2 | STMicroelectronics | N-channel 600 V, 175 mOhm typ., 18 A MDmesh DM2 Power MOSFET in a TO-220 package RoHS : Compliant |
| 610 | ||
| STP24N60M6 | STMicroelectronics | N-channel 600 V, 162 mOhm typ., 17 A MDmesh M6 Power MOSFET in a TO-220 package RoHS : Compliant |
| 517 | ||
| STP240N10F7 | STMicroelectronics | N-channel 100 V, 2.85 mOhm typ., 110 A STripFET F7 Power MOSFET in a TO-220 package RoHS : Compliant |
| 75 | ||
| LDP24A | STMicroelectronics | 24 V TVS for load dump in R6 RoHS : Compliant |
| 65 | ||
| EVLSPIN9P24 | STMicroelectronics | Demonstration board for STSPIN9P2 full-bridge system-in-package |
| 18 | ||
| LDP24ARL | STMicroelectronics | 24 V TVS for load dump in R6 RoHS : Compliant |
| 7 | ||
 Bisco Industries | GP24-0938X0500-5 | Groov-Pin Corporation | 1,800 | |||
| GP-24-093-875-72 | Groov-Pin Corporation | 1,000 | ||||
| P2-44-1 | Southco | 509 | ||||
| EP-24 YELLOW | Caplugs | 389 | ||||
| FH4440-P24 | Buckeye Fasteners | 357 | ||||
| 13SP242 | Micro Plastics Inc | 331 | ||||
| ASP-24 SILVER | Caplugs | 324 | ||||
| GP24-093X0250-50 | Groov-Pin Corporation | 170 | ||||
| 13SP249 | Micro Plastics Inc | 105 | ||||
| TP24693-C1B | 100 | |||||
| MS20613-8P24 | MS Rivets | 18 | ||||
| MS20253P2-480 | MS HINGES | 12 | ||||
| GP24-187X0750-50 | Groov-Pin Corporation | 10 | ||||
| MTP-24HF-1-3-B-U | MISC. INDUSTRIAL HRD | 3 | ||||
| P24S35-42 | WM Berg | 2 | ||||
 Rochester Electronics | FQP24N08 | onsemi | MOSFET N-Channel 80V 24A (Tc) TO-220-3 Tube RoHS : Compliant |
| 915 | |
ASM3P2474AF-06OR | onsemi | Clock Generators and Synthesizers Phase Lock Loop (PLL) 60MHz SOT-23-6 T/R RoHS : Compliant |
| 39,000 | ||
| SPP24N60C3XKSA1 | Infineon Technologies AG | Power Field-Effect Transistor, 24.3A I(D), 600V, 0.16ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant |
| 1,558 | ||
OP249FZ | Analog Devices Inc | Op Amp Standard 4.7MHz 8-DIP Tube RoHS : Not Compliant |
| 1 | ||
CY2XP24ZXC | Cypress Semiconductor | Clock Generators and Synthesizers Clock Generator 187.5MHz 8-SOP RoHS : Compliant |
| 1,039 | ||
FAN3800MLP24X | Fairchild Semiconductor Corporation | Audio Amplifier Class AB 1-Channel (Mono) or 2-Channel (Stereo) 16mW 24-QFN RoHS : Compliant |
| 4,143 | ||
| HA9P2444-9 | Harris Semiconductor | Op Amp Standard 50MHz 16-SOIC RoHS : Compliant |
| 918 | ||
| IRFP245 | Harris Semiconductor | MOSFET N-Channel 250V 14A (Tc) TO247 RoHS : Not Compliant |
| 400 | ||
| IRFP246 | Harris Semiconductor | MOSFET N-Channel 275V 15A (Tc) TO247 RoHS : Not Compliant |
| 5,674 | ||
| ECLAMP2454P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 8-SON T/R RoHS : Compliant |
| 1,000 | ||
| ECLAMP2458P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 16-SON T/R RoHS : Compliant |
| 27,820 | ||
| RCLAMP2431T.TCT | Semtech Corporation | TVS Diode Zener Bi-Directional 24V (Max) 50V SOD-882 T/R RoHS : Compliant |
| 33,409 | ||
| UCLAMP2461P.TNT | Semtech Corporation | TVS Diode Zener Uni-Directional 24V (Max) 65V 2-SON T/R RoHS : Compliant |
| 50,000 | ||
| TLP240GA(D4TP1,F(O | Toshiba America Electronic Components | Photorelay (MOSFET output, 1-form-a) RoHS : Compliant |
| 18,000 | ||
| GR DASPA2.23-GRHP-24-1-100-R18-XX | ams OSRAM Group | OSCONIQ P 226 RoHS : Compliant |
| 1,200 | ||
 Sager | P24 | Hubbell Incorporated | WALLPLATE, 2-G, 2) STRP MT BLANK BR |
| 0 | |
| ASP-240660-02 | Samtec Inc | Samtec | 0 | |||
| ASP-242161-02 | Samtec Inc | Samtec | 0 | |||
| ASP-242955-01 | Samtec Inc | Samtec | 0 | |||
| AP-GT1-1P-2428/F4C-ID(62) | Hirose Electric Co Ltd | Bench Top Tools GT1 CONNECTOR FOR COAX CABLE | 0 | |||
| APGT1-1P-2428/F5C-ID(66) | Hirose Electric Co Ltd | Bench Top Tools GT1 CONNECTOR FOR COAX CABLE | 0 | |||
| NKPP24FMWH | Panduit Corp | Wire Ducting & Raceways NK Modular Patch Panel, Flat, Flush Moun |
| 0 | ||
| VPP24K1SD75T | Switchcraft Conxall | Patch Panels VIDEO PATCHBAY | 0 | |||
| UP2-4R7 | Eaton Bussmann | Eaton Corporation | 0 | |||
| P270-DP24AR5K284 | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P270-DP24CR1K112 | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P270-DP24CR50K112 | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P270-DP24DR1K263 | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P270-SP24AR100K274 | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P270-SP24BR100K | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
 Ameya Holding Limited | RCLAMP2431TQTCT | Semtech Corporation | RCLAMP Series 45 Vcl Ultra-Low Capacitance 1-Line ESD Protection RoHS : Compliant | 45,754 | ||
| MP2451DJ | Monolithic Power Systems | RoHS : Not Compliant | 30,000 | |||
| STP24N60M6 | STMicroelectronics | MOSFET N-channel 600 V RoHS : Compliant | 20,080 | |||
| STP24N60M2 | STMicroelectronics | Transistor: N-MOSFET; MDmesh™ || Plus; unipolar; 600V; 12A; 150W RoHS : Compliant | 18,130 | |||
ADS62P24IRGCR | Texas Instruments | IC ADC 12BIT SER/PAR 105M 64VQFN RoHS : Compliant | 14,469 | |||
| STP240N10F7 | STMicroelectronics | MOSFET 100V 0.003 OHM RoHS : Compliant | 9,828 | |||
| STP24N60DM2 | STMicroelectronics | Single N-Channel 600 V 0.2 Ohm 29 nC 150 W Silicon Flange Mount Mosfet TO-220-3 RoHS : Compliant | 3,080 | |||
| BM2P249TF-E2 | ROHM Semiconductor | PWM type DC/DC converter IC Integrated Switching MOSFET for non-Isolated type RoHS : Compliant |
| 2,750 | ||
| MP2456GJ-Z | Monolithic Power Systems | MP2456 Series 50 V 0.5 A 1.45 MHz Surface Mount Step-Down Converter - TSOT23-6 RoHS : Compliant | 643 | |||
| BM2P241X-Z | ROHM Semiconductor | 内置开关MOSFET 非绝缘型 PWM DC/DC转换器IC RoHS : Compliant |
| 200 | ||
| BM2P249Q-Z | ROHM Semiconductor | 内置开关MOSFET 非绝缘型PWM DC/DC转换器IC RoHS : Compliant |
| 200 | ||
| MP2459GJ-Z | Monolithic Power Systems | MP2459 Series 55 V 0.5 A 580 kHz Surface Mount Step-Down Converter - TSOT23-6 RoHS : Compliant | 130 | |||
| RCLAMP2431T.TCT | Semtech Corporation | RClamp2431TQ Series 26.7 V 100 W Ultra-Low Capacitance 1-Line ESD protection RoHS : Compliant | 120 | |||
| BM2P241W-Z | ROHM Semiconductor | 内置开关MOSFET 非隔离型 PWM DC-DC转换器IC RoHS : Compliant |
| 100 | ||
| BM2P249TF-EVK-001 | ROHM Semiconductor | BM2P249TF REFERENCE BOARD. NON-I |
| 3 | ||
 ComSIT USA | MP2459GJZ | Monolithic Power Systems | AVAILABLE EU | 37,891 | ||
| P2441 | SW | AVAILABLE EU | 12,083 | |||
| TLP241BD4TP1F | Toshiba America Electronic Components | AVAILABLE EU | 1,125 | |||
ComSIT USA | LPA675P240 | OSRAM GmbH | Electronic Component RoHS : Compliant | 16,000 | ||
| LCGM67SP24010R18 | OSRAM GmbH | Electronic Component RoHS : Compliant | 9,000 | |||
| TLP2451TPF | Toshiba America Electronic Components | GAALAS IRED PLUS PHOTO IC PHOTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 2,500 | |||
| SRX30ERP241200F6501 | TDK Corporation | LLC RESONANCE POWER TRANSFORMER Power Transformer RoHS : Compliant | 2,400 | |||
| IRFP244PBF | Vishay Siliconix | POWER MOSFET Power Field-Effect Transistor, 15A I(D), 250V, 0.28ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-247AC RoHS : Compliant | 2,150 | |||
| ECLAMP2410PTCT | Semtech Corporation | ESD PROTECTION DEVICE FOR T-FLASH/MICROSD INTERFACE Trans Voltage Suppressor Diode, 5V V(RWM), Bidirectional, 7 Element, Silicon RoHS : Compliant | 2,115 | |||
| D25P24A4GV00LF | Amphenol FCi | D Subminiature Connector, 25 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40 RoHS : Compliant | 1,320 | |||
| ECLAMP2455KDKR | Semtech Corporation | Electronic Component RoHS : Not Compliant | 985 | |||
| TOP247RTL | power integr | Extended Power, Design Flexible, EcoSmart, Integrated Off-Line Switcher Switching Regulator, Voltage-mode, 5.76A, 140kHz Switching Freq-Max, CMOS, PSSO6 RoHS : Not Compliant | 773 | |||
| PIC12C509A04PP24 | mct | 8-PIN, 8-BIT CMOS MICROCONTROLLER RISC Microcontroller, 8-Bit, OTPROM, PIC12 CPU, 4MHz, CMOS, PDIP8 RoHS : Not Compliant | 706 | |||
| 5KP24CA | Littelfuse Inc | TVS DIODE Trans Voltage Suppressor Diode, 5000W, 24V V(RWM), Bidirectional, 1 Element, Silicon RoHS : Compliant | 390 | |||
| TOP246FN | pi | Extended Power, Design Flexible, EcoSmart, Integrated Off-Line Switcher Switching Regulator, Voltage-mode, 4.32A, 140kHz Switching Freq-Max, CMOS, PZIP6 RoHS : Not Compliant | 350 | |||
| CB1APFP24VH58 | Panasonic Electronic Components | Electronic Component RoHS : Compliant | 300 | |||
| TOP245PN | Power Integrations | Extended Power, Design Flexible, EcoSmart, Integrated Off-Line Switcher Switching Regulator, Voltage-mode, 2.88A, 140kHz Switching Freq-Max, CMOS, PDIP7 RoHS : Compliant | 300 | |||
| D50P24A6RX09LF | Amphenol Corporation | D Subminiature Connector, 50 Contact(s), Male, Solder Terminal RoHS : Compliant | 90 | |||
 GLYN GmbH & Co. KG | CM100TXP-24T#330G | Mitsubishi Electric | IGBT, T-Series, NX-Type, 1200V, 100A, 6in1, 122x6 | 774 | ||
| NP-2411D-4 | Seiko Instruments Inc | Thermal Kiosk Printer 2" USB+RS232 | 1 | |||
 Interstate Connecting Components | 171-003-3P-6J5-6-P2-429A | Glenair Inc | 171-003-3P-6J5-6-P2-429A MICRO-D MOUNT STRIP | 0 | ||
| PT00P-24-31PY(027) | Amphenol Industrial Operations | AI-Solder Wall-Mt Rec P-Class 26482-1 | 0 | |||
| PT00P-24-61P(023) | Amphenol Industrial Operations | AI-Solder Wall-Mt Rec P-Class 26482-1 | 0 | |||
| PT00P-24-61P(023) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PT00P-24-61SY(027) | Amphenol Industrial Operations | AI-Solder Wall-Mt Rec P-Class 26482-1 | 0 | |||
| PT00SP-24-61S(021) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PT01P-24-61P(433) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PT01P-24-61SZ(025) | Amphenol Industrial Operations | AI-Solder Cable Rec P-Class 26482-1 | 0 | |||
| PT01P-24-71PX(027) | Amphenol Industrial Operations | AI-Solder Cable Rec P-Class 26482-1 | 0 | |||
| PT01SP-24-61S(011) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| BACC63BP24C57P10H | Cinch Connectivity Solutions | BACC PLUG 55#20 2#12 PIN | 0 | |||
| BACC63BP24D30P7H | Cinch Connectivity Solutions | BACC PLUG 30#16 PIN | 0 | |||
| BACC63BP24D61SNH | Cinch Connectivity Solutions | BACC PLUG 61#20 SKT | 0 | |||
| BACC63BP24H30SNH | Cinch Connectivity Solutions | BACC PLUG 30#16 SKT | 0 | |||
| BACC63BP24H43S6H | Cinch Connectivity Solutions | BACC PLUG 23#20 20#16 SKT | 0 | |||
 PEI Genesis | CIR030FP-24-9S-F80 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 16 | |
| BACC63BP24C57P10H | Cinch Connectivity Solutions |
| 0 | |||
| BACC63BP24D30P7H | Cinch Connectivity Solutions |
| 0 | |||
| BACC63BP24D61SNH | Cinch Connectivity Solutions |
| 0 | |||
| BACC63BP24H30SNH | Cinch Connectivity Solutions |
| 0 | |||
| BACC63BP24H43S6H | Cinch Connectivity Solutions |
| 0 | |||
| SP24W1F | Amphenol Tuchel |
| 0 | |||
| 30-269-2P24N11 | SOURIAU-SUNBANK |
| 0 | |||
| PTG06P24-31P-072 | Amphenol Corporation |
| 0 | |||
| PTG06P24-71SW-072 | Amphenol Corporation |
| 0 | |||
| MS3475W12-3SY-US-P245 | Amphenol Aerospace |
| 0 | |||
| 30-269-2P24A11 | SOURIAU-SUNBANK |
| 0 | |||
| GH805DU80P24-3 | SOURIAU-SUNBANK |
| 0 | |||
| FRCIR030FP-24-28P-F80-T118 | ITT Interconnect Solutions |
| 0 | |||
| FRCIR030LCFZFP-24A1PF80T89VO | ITT Interconnect Solutions |
| 0 | |||
 PUI | MRCBP-24-N-30A | 2,013 | ||||
| MRCBP-24-H-30A | 1,500 | |||||
| MRCBP-24-N-40A | 124 | |||||
| MRCBP-24-H-15A | 47 | |||||
| OD1238AP-24HTB | Orion Fans | RoHS : Compliant | 45 | |||
| MRCBP-24-V-25A | 39 | |||||
 Rutronik | RK73B1ETTP242J | KOA Speer Electronics Inc | RC0402 2,4K 5% 0,1W TK200 RoHS : Compliant |
| 1,130,000 | |
| RG1005P-2431-B-T5 | Susumu Co Ltd | TF0402 2,43K 0,1% 0,0625W TK25 RoHS : Compliant |
| 295,000 | ||
| ISP2454-LX-RS | Insight SiP | BLE 6.0 - Module nRF54L Standard RoHS : Compliant |
| 2,374 | ||
| SIHP240N65E-GE3 | Vishay Intertechnologies | N-CH 650V 16A 208mOhm TO-220AB RoHS : Compliant |
| 1,000 | ||
| ISP2454-LX-JT | Insight SiP | BLE 6.0 - Module nRF54L Standard RoHS : Compliant |
| 680 | ||
| SPP24N60C3XKSA1 | Infineon Technologies AG | N-CH 600V 24A 160mOhm TO220-3 RoHS : Compliant |
| 450 | ||
| ISP2454-LL-JT | Insight SiP | BLE 6.0 - Module nRF54L Basic RoHS : Compliant |
| 200 | ||
| IRFP244PBF | Vishay Intertechnologies | N-CH 250V 15A 280mOhm TO-247AC RoHS : Compliant |
| 100 | ||
| ISP2454-LP-JT | Insight SiP | BLE 6.0 - Module nRF54L Premium RoHS : Compliant |
| 85 | ||
| ISP2454-LP-TB | Insight SiP | ISP2454 Test Board Premium RoHS : Compliant |
| 10 | ||
| ISP2454-LL-TB | Insight SiP | ISP2454 Test Board Basic RoHS : Compliant |
| 8 | ||
| RACPRO1-4SP/24V/10A | RECOM Power GmbH | DIN-RAIL E-Fuse 4*10A 24V RoHS : Compliant |
| 5 | ||
| ISP2454-LL-EB | Insight SiP | ISP2454 Evaluation Board Basic RoHS : Compliant |
| 5 | ||
| ISP2454-LP-EB | Insight SiP | ISP2454 Evaluation Board Premium RoHS : Compliant |
| 5 | ||
| RACPRO1-4SP/24V/5A | RECOM Power GmbH | DIN-RAIL E-Fuse 4*5A 24V RoHS : Compliant |
| 3 | ||
 Chip 1 Exchange | 17-21/Y2C-AN1P2/4T | Eveready | INSTOCK | 1,105,408 | ||
| ZNDP-24V-A-S | JST Manufacturing | INSTOCK RoHS : Compliant | 332,711 | |||
| CP0402P2442ENTR | Kyocera AVX Components | INSTOCK RoHS : Compliant | 9,867 | |||
| RK73H1ETTP2492F | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 7,443 | |||
| HDP24-24-31SE-L017 | TE Connectivity | INSTOCK RoHS : Compliant | 5,645 | |||
| 2EDGR-5.0-03P-24-100AH | Degson Electronics Co Ltd | INSTOCK | 3,737 | |||
| TOP247YN | POWIN | INSTOCK | 2,000 | |||
| TOP244GN-TL | POWIN | INSTOCK | 1,799 | |||
| C42P2475KFSC000 | Xiamen Faratronic Co Ltd | INSTOCK RoHS : Compliant | 1,743 | |||
| YHDP24-18-14PEC041 | TE Connectivity | INSTOCK RoHS : Compliant | 837 | |||
| RK73H1ETTP2431F | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 744 | |||
| MC55220CP2.4.G | INSTOCK | 200 | ||||
| FP248,4TE | INSTOCK | 65 | ||||
| D25P24A4GV00LF | Amphenol FCi | INSTOCK RoHS : Compliant | 30 | |||
| ISP2432 | INSTOCK | 18 | ||||
 Avnet Abacus | RK73H1ETTP2400F | KOA Speer Electronics Inc | SMD Chip Resistor 240 ohm 1 100 mW 0402 1005 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1ETTP2400F) RoHS : Compliant | 1,110,000 | ||
| RK73H1ETTP2402F | KOA Speer Electronics Inc | SMD Chip Resistor 24 kohm 1 100 mW 0402 1005 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1ETTP2402F) RoHS : Compliant | 380,000 | |||
| HDP24-24-31SE-L017 | TE Connectivity | Circular Connector Circular Industrial HDP20 Series Jam Nut Receptacle 31 Contacts (Alt: HDP24-24-31SE-L017) RoHS : Compliant | 3,630 | |||
| D15P24A4GX00LF | Amphenol Corporation | D Sub Connector Standard Plug Delta D Series 15 Contacts DA Solder (Alt: D15P24A4GX00LF) RoHS : Compliant | 1,650 | |||
| AHDP24-PN01 | Amphenol Corporation | Connector Accessory Nut Amphenol DuraMate AHDP Series Size 24 Receptacles DuraMate AHDP Series (Alt: AHDP24-PN01) RoHS : Compliant | 1,600 | |||
| LD09P24A4GX00LF | Amphenol Corporation | D Sub Connector Standard Plug FCI DELTAD LD Series 9 Contacts DE Solder (Alt: LD09P24A4GX00LF) RoHS : Compliant | 1,080 | |||
| HDP24-24-47PE | TE Connectivity | Conn Circular Housing Inline Circular Housing Receptacle PIN 47 POS 24 Shell Size Glass Filled Poly (Alt: HDP24-24-47PE) RoHS : Compliant | 900 | |||
| D25P24A6GV00LF | Amphenol Corporation | D Sub Connector Standard Plug FCI Delta D Series 25 Contacts DB Solder (Alt: D25P24A6GV00LF) RoHS : Compliant | 720 | |||
| D25P24A6RX09LF | Amphenol Corporation | D Sub Connector Delta D Standard Plug D 25 Contacts DB Solder (Alt: D25P24A6RX09LF) RoHS : Compliant | 720 | |||
| D25P24A4GV00LF | Amphenol Corporation | D Sub Connector DB25 Standard Plug FCI Delta D 25 Contacts DB Solder (Alt: D25P24A4GV00LF) RoHS : Compliant | 680 | |||
| HDP24-24-31SE | TE Connectivity | Automotive Connector Housing HDP20 Series Receptacle 31 Ways (Alt: HDP24-24-31SE) RoHS : Compliant | 420 | |||
| D50P24A6RX09LF | Amphenol Corporation | D Sub Connector DB50 Standard Plug D 50 Contacts DD Solder (Alt: D50P24A6RX09LF) RoHS : Compliant | 360 | |||
| D09P24A6GV00LF | Amphenol Corporation | D Sub Connector Standard Plug FCI Delta D Series 9 Contacts DE Solder (Alt: D09P24A6GV00LF) RoHS : Compliant | 360 | |||
| MFP 240 | knitter-switch | Switch Slide Top Slide 035A 30VDC 10000Cycle PC Pins ThruHole (Alt: MFP 240) RoHS : Compliant | 300 | |||
| HDP24-24-31SE | TE Connectivity | Automotive Connector Housing HDP20 Series Receptacle 31 Ways (Alt: HDP24-24-31SE) RoHS : Compliant | 90 | |||
Avnet Asia | TOP244PN | Power Integrations | (Alt: TOP244PN) RoHS : Compliant | 4,000 | ||
| TOP244R-TL | Power Integrations | (Alt: TOP244R-TL) RoHS : Not Compliant | 3,000 | |||
| TOP242YN | Power Integrations | (Alt: TOP242YN) RoHS : Compliant | 2,500 | |||
| GPCP245400111HRS | Amphenol Corporation | AHLGPCP245400111HRS PCIE POWER 2X27PIN D (Alt: GPCP245400111HRS) RoHS : Compliant |
| 450 | ||
| ASP-241442-01 | Samtec Inc | ERF5-030-07.0-L-DV-K-TR K-DOT-220X400-32 (Alt: ASP-241442-01) RoHS : Compliant |
| 315 | ||
| RSP-245244-01 | Samtec Inc | SMA JACK RA WITH MIXED TECHNOLO PC TAILS (Alt: RSP-245244-01) RoHS : Compliant |
| 100 | ||
| LCC600-28U-4P24 | Advanced Energy Industries Inc | AC/DC Enclosed Power Supply (PSU), ITE & Medical, Adjustable, Fixed, 1 Output, 600 W, 24 V, 25 A (Alt: LCC600-28U-4P24) RoHS : Compliant | 0 | |||
| ASP-247185-01 | Samtec Inc | (Alt: ASP-247185-01) RoHS : Compliant | 0 | |||
| G87MP241202PHR | Amphenol Corporation | (Alt: G87MP241202PHR) RoHS : Compliant | 0 | |||
| G87MP242205THR | Amphenol Corporation | (Alt: G87MP242205THR) RoHS : Compliant | 0 | |||
| ASP-243758-01 | Samtec Inc | TSW-110-08-F-D-SHEAR TAIL 3.4MM (Alt: ASP-243758-01) RoHS : Compliant | 0 | |||
| P2426H | Dell Technologies | (Alt: P2426H) RoHS : Compliant | 0 | |||
| AU10194389-P24ANLF | Amphenol Corporation | (Alt: AU10194389-P24ANLF) RoHS : Compliant | 0 | |||
| TLP2404(TP,F) | Toshiba America Electronic Components | (Alt: TLP2404(TP,F)) RoHS : Compliant | 0 | |||
| TOP247YN | Power Integrations | Power Management IC, Off Line Switcher 6A, 265 VAC, TO-220-6 (Alt: TOP247YN) RoHS : Compliant | 0 | |||
 Avnet Silica | ECLAMP2457K.C | Semtech Corporation | ESDEMI 4line Protection (Alt: ECLAMP2457K.C) RoHS : Compliant | 90,000 | ||
| MP24895-AGH-Z | Monolithic Power Systems | (Alt: MP24895-AGH-Z) RoHS : Compliant | 85,000 | |||
| STP24NM60N | STMicroelectronics | Power MOSFET N Channel 600 V 17 A 0168 ohm TO220 Through Hole (Alt: STP24NM60N) RoHS : Compliant | 10,000 | |||
| STP24DP05BTR | STMicroelectronics | LED DRVR 33V5V 48Pin TQFP TR (Alt: STP24DP05BTR) RoHS : Compliant | 4,800 | |||
| AP2411SN-7 | Diodes Incorporated | Power Load Distribution Switch High Side Active High 1 Output 25 A 007 ohm UDFN2020EP6 (Alt: AP2411SN-7) RoHS : Compliant | 3,000 | |||
| STP24N60DM2 | STMicroelectronics | Power MOSFET N Channel 600 V 18 A 200 Milliohms TO220 3 Pins Through Hole (Alt: STP24N60DM2) RoHS : Compliant | 2,700 | |||
| AP2411AMP-13 | Diodes Incorporated | Power Load Distribution Switch High Side Active High 1 Output 25 A 007 ohm MSOPEP8 (Alt: AP2411AMP-13) RoHS : Compliant | 2,500 | |||
| STP240N10F7 | STMicroelectronics | (Alt: STP240N10F7) RoHS : Compliant | 1,850 | |||
| STP24N60M6 | STMicroelectronics | (Alt: STP24N60M6) RoHS : Compliant | 1,000 | |||
| STP24N60M2 | STMicroelectronics | Trans MOSFET NCH 600V 18A 3Pin3Tab TO220 Tube (Alt: STP24N60M2) RoHS : Compliant | 750 | |||
| MP2410BGJ-Z | Monolithic Power Systems | (Alt: MP2410BGJ-Z) RoHS : Compliant | 0 | |||
| AML26P2411-TC | Microchip Technology Inc | 26 GHz Power Amplifier (Alt: AML26P2411-TC) RoHS : Compliant | 0 | |||
| MP2489DJ-LF-P | Monolithic Power Systems | (Alt: MP2489DJ-LF-P) RoHS : Compliant | 0 | |||
| UCLAMP2482PWQ.C | Semtech Corporation | Clamp ESD Protection (Alt: UCLAMP2482PWQ.C) RoHS : Compliant | 0 | |||
| RCLAMP2431T.TCT | Semtech Corporation | Diode TVS Single BiDirectional 24V 100W 2Pin SLP TR (Alt: RCLAMP2431T.TCT) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | XBP24BZ7WITB003 | Digi International Inc | XBee-PRO ZB S2B (ZigBee PRO Feature Set), 63mW, wire antenna, 250000 bps;32K Programmable, Rtr/End Dev, API |
| 1 | |
| XBP24BZ7B-DK | Digi International Inc | XBee-PRO ZB Programmable Dev Kit Americas and Australia |
| 1 | ||
| AM1P-2403SZ | Aimtec | RoHS : Compliant |
| 0 | ||
| RBP01A-P24/2.2L | Nipron Co | Lead-acid battery |
| 0 | ||
| UDP-240-A24-E0X-B | Nipron Co | 240W 24V DIN-rail power supply |
| 0 | ||
| AM1P-2412SZ | Aimtec | RoHS : Compliant |
| 0 | ||
| EFM8BB31F32G-D-QSOP24R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
EFM8LB11F32E-B-QSOP24R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| LBP.2450.X.A.30 | Taoglas Antenna Solutions | LTCC Band Pass Filter for 2450MHz 1.6x0.8x0.6mm, Bandwidth 100MHz |
| 0 | ||
| WLP.2450.50.6.A.08 | Taoglas Antenna Solutions | WLP.2450.50.6.A.08 Wi-Fi Omnidirectional CP 50mm Single Feed Patch |
| 0 | ||
| AISC-0402HP-24NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-24NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AM1P-2403SH30Z | Aimtec | RoHS : Compliant |
| 0 | ||
| EFM8BB31F32I-D-QSOP24R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| XBP24CZ7UIS-005 | Digi International Inc | XBee-PRO ZB SMT (ZigBee PRO Feature Set) U.Fl ant connector, 250000 bps, New FEM |
| 0 | ||
 Component Electronics, Inc | RK73H1ETP2492F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 9,260 | |
| MBB0207-50-1%-RP-24K | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 4,995 | ||
| 13SP249 | Essentra Components | IN STOCK SHIP TODAY |
| 1,000 | ||
| 13SP243 | Essentra Components | IN STOCK SHIP TODAY |
| 700 | ||
| SIMP241D | FECS | IN STOCK SHIP TODAY | 300 | |||
| GSP2.4113.13 | Schurter Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant | 200 | |||
DRP-24V48W1AZ | Delta Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 16 | ||
| FCP2461 | FIBER CONNEC | IN STOCK SHIP TODAY | 16 | |||
| HDP24-18-8PN | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 13 | ||
| 28-P24782G001 | IN STOCK SHIP TODAY | 10 | ||||
| AP24B-66 | WINFRED | IN STOCK SHIP TODAY | 9 | |||
| SG-531P-24.0000MC | Seiko Epson Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| HDP24-24-31SE | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| 50P-241 | JFW Industries Inc | IN STOCK SHIP TODAY | 2 | |||
| KMK3P-24VAC | Keyswitch Varley Ltd | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | P2-44-1 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta |
| 2,219 | |
| P2-44-P | Southco |
| 4 | |||
| 13SP249 | Essentra Components | ROUND SPACER, .171 ID, .500 OD | 0 | |||
| P2-411-12 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta | 0 | |||
| P2-422-29 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta | 0 | |||
| P2-441-12 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta | 0 | |||
| P2-422-19 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta | 0 | |||
| CBLSP245A | Essentra Components | CB LOCKING SUPPORT POSTNYL NAT | 0 | |||
| 13SP241B | Essentra Components | ROUND SPACER, .219 ID, .500 OD | 0 | |||
| CBMSP245A | Essentra Components | CB MINI SUPPORT POSTNYL NATURA | 0 | |||
| P2-41-P | Southco | 0 | ||||
| 13SP243 | Essentra Components | ROUND SPACER, .140 ID, .500 OD | 0 | |||
| P2-421-19 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta | 0 | |||
| P2-411-29 | Southco | The flush design of the P2 Flush Pull minimizes protrusion on the face of a door or panel while an offset recess provides sufficient grip space for simple panel lifting and removal. The P2 Flush Pull features single-hole panel preparation and built-in ta | 0 | |||
| 13SP242 | Essentra Components | 0 | ||||
 EBV Elektronik | TOP246YN | Power Integrations | ACDC OffLine Switcher IC TOPSwitchGX Flyback 85 265 VAC 132 kHz 432 A out 125 W TO2207 (Alt: TOP246YN) RoHS : Compliant | 36,350 | ||
| TOP245YN | Power Integrations | Power Management IC Off Line Switcher TOPSwitchGX 265 VAC TO2206 (Alt: TOP245YN) RoHS : Compliant | 12,000 | |||
| STP24NF10 | STMicroelectronics | Power MOSFET N Channel 100 V 26 A 0055 ohm TO220 Through Hole (Alt: STP24NF10) RoHS : Compliant | 10,800 | |||
| TOP247YN | Power Integrations | Power Management IC Off Line Switcher 6A 265 VAC TO2206 (Alt: TOP247YN) RoHS : Compliant | 8,000 | |||
| HLMP-2400-EF000 | Broadcom Limited | (Alt: HLMP-2400-EF000) RoHS : Compliant | 3,840 | |||
| HLMP-2400 | Broadcom Limited | LED Bar Graph Array Yellow 20 mA 21 V 20 mcd 2 LEDs 889mm x 381mm (Alt: HLMP-2400) RoHS : Compliant | 2,880 | |||
| TLP241A(D4,F(O | Toshiba America Electronic Components | Relay SSR 25mA 14V DCIN 2A 40V Open Drain 4Pin DIP Tube (Alt: TLP241A(D4,F(O) RoHS : Compliant | 1,800 | |||
| TLP240J(TP1,F(O | Toshiba America Electronic Components | Relay SSR 25mA 14V DCIN 009A 600V DCOUT 4Pin DIP TR (Alt: TLP240J(TP1,F(O) RoHS : Compliant | 1,500 | |||
| TOP242GN-TL | Power Integrations | ACDC Converter Flyback 85 to 265 VAC In DIP7 (Alt: TOP242GN-TL) RoHS : Compliant | 1,000 | |||
| SIHP24N80AEF-GE3 | Vishay Intertechnologies | (Alt: SIHP24N80AEF-GE3) RoHS : Compliant | 800 | |||
| TLP241B(D4,F(O | Toshiba America Electronic Components | PHOTORELAY 1FORM A VOFF40V5KV (Alt: TLP241B(D4,F(O) RoHS : Compliant | 600 | |||
| TOP242YN | Power Integrations | (Alt: TOP242YN) RoHS : Compliant | 500 | |||
| TLP240GA(LF5,F(O | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin DIP Tube (Alt: TLP240GA(LF5,F(O) RoHS : Compliant | 200 | |||
| IRFP244PBF | Vishay Intertechnologies | (Alt: IRFP244PBF) RoHS : Compliant | 0 | |||
| TLP2403(TP,F) | Toshiba America Electronic Components | Optocoupler DCIN 1CH Darlington With Base DCOUT 8Pin SO TR (Alt: TLP2403(TP,F)) RoHS : Compliant | 0 | |||
 ECCO | CIR030FP-24-10P-F80 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 15 | |
 Flip Electronics | EFM8BB31F32G-D-QSOP24R | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 107,500 | |
| EFM8LB12F32E-C-QSOP24R | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 6,188 | ||
| EFM8BB10F8G-A-QSOP24 | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 5,824 | ||
| EFM8LB12F64E-C-QSOP24R | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant | 5,467 | |||
EFM8BB21F16I-C-QSOP24 | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 4,902 | ||
| EFM8BB31F64G-D-QSOP24R | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 4,821 | ||
| EFM8UB11F16G-C-QSOP24 | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 3,835 | ||
| CYPD3172P-24LQXQ | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 3,714 | ||
| EFM8UB11F16G-C-QSOP24R | Silicon Laboratories Inc | Stock RoHS : Compliant | 3,000 | |||
| CP2401-GQR | Silicon Laboratories Inc | Stock, Ship Today | 2,940 | |||
| EFM8LB10F16E-C-QSOP24R | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 1,973 | ||
| FQP24N08 | onsemi | Stock, Ship Today RoHS : Compliant | 1,000 | |||
| CYPD3173P-24LQXQ | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 902 | ||
DF2212FP24DV | Renesas Electronics Corporation | Stock RoHS : Compliant | 572 | |||
| DF2211FP24V | Renesas Electronics Corporation | Stock RoHS : Compliant | 182 | |||
 Master Electronics | P24 | Xcelite by Weller | 1/8 MIDGET HEX SCREWDRIVER RoHS : Compliant |
| 10 | |
| FOC-17P24-17P24-GL03/130 | Phoenix Contact | FOC-17P24-17P24-GL03/130 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/160 | Phoenix Contact | FOC-17P24-17P24-GL03/160 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/45 | Phoenix Contact | FOC-17P24-17P24-GL03/45 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/90 | Phoenix Contact | FOC-17P24-17P24-GL03/90 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/20 | Phoenix Contact | FOC-17P24-17P24-GL03/20 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/180 | Phoenix Contact | FOC-17P24-17P24-GL03/180 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/35 | Phoenix Contact | FOC-17P24-17P24-GL03/35 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/80 | Phoenix Contact | FOC-17P24-17P24-GL03/80 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/170 | Phoenix Contact | FOC-17P24-17P24-GL03/170 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/190 | Phoenix Contact | FOC-17P24-17P24-GL03/190 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/75 | Phoenix Contact | FOC-17P24-17P24-GL03/75 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/70 | Phoenix Contact | FOC-17P24-17P24-GL03/70 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/200 | Phoenix Contact | FOC-17P24-17P24-GL03/200 RoHS : Compliant |
| 0 | ||
| FOC-17P24-17P24-GL03/65 | Phoenix Contact | FOC-17P24-17P24-GL03/65 RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W02628/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male RA to SMA Male RA Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with Times Microwave Components with 270 Deg. Clock., Pasternack’s PE3W02628/SP-24 low loss right angle SMA male to right angle SMA male RF cable assembly using LMR-240-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W02628/SP-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02628/SP-24 RF cable has a tpe jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. This PE3W02628/SP-24 SMA plug to SMA plug cable assembly is built with LMR-240-UF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 1,425 | |
| PE3W12625/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink and 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink and 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12625/SP-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12625/SP-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W12625/SP-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 639 | ||
| PE3C1830/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to BNC Male (Plug) Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to BNC male (plug) low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a BNC cable connection on the other. Our low loss SMA to BNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1830/WP-24 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1830/WP-24 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to BNC male cable has a maximum VSWR of 1.4:1. SMA plug to BNC plug cable assembly PE3C1830/WP-24 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1830/WP-24 can also be used in the other direction and will be a BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3W02466/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) right angle low loss cable 24 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle TNC cable connection on the other. Our low loss SMA to right angle TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W02466/WP-24 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02466/WP-24 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to right angle TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W02466/WP-24 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02466/WP-24 can also be used in the other direction and will be a right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3C2860/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male to N male right angle low loss cable 24 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle type N cable connection on the other. Our low loss SMA to right angle type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2860/WP-24 can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2860/WP-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to right angle type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C2860/WP-24 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2860/WP-24 can also be used in the other direction and will be a right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 254 | ||
| PE3C1625/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1625/WP-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1625/WP-24 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C1625/WP-24 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C6640/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-P103 Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-P103 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6640/SP-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C6640/SP-24 is built with PE-P103 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 24 inch length using PE-P103 coax. |
| 50 | ||
| PE3W07472/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to QMA Male Right Angle Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male right angle to QMA male right angle cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to QMA male right angle cable 24 inch length using PE-SR405FLJ coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle QMA cable connection on the other. Our right angle SMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. PE3W07472/SP-24 can also be known as a right angle SMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to QMA plug cable assembly PE3W07472/SP-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07472/SP-24 can also be used in the other direction and will be right angle QMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to QMA male right angle cable 24 inch length using PE-SR405FLJ coax. |
| 39 | ||
| PE3C6912/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 4.3-10 Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a SMA cable connection on the other. Our low loss 4.3-10 to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6912/WP-24 can also be known as a low loss 4.3-10 plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6912/WP-24 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our 4.3-10 male to SMA male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to SMA plug cable assembly PE3C6912/WP-24 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6912/WP-24 can also be used in the other direction and will be a SMA male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to SMA cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 38 | ||
| PE3MP2442-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRB 3-Lug Jack with Blunt Cut for 78 Ohm PE-30-02003, 24" Cable., Radio frequency assembly TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2442-24 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2442-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2442-24 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 24" cable. |
| 5 | ||
| PE3C10353/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low PIM Cable 24 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low PIM cable 24 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10353/WP-24 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10353/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C10353/WP-24 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10353/WP-24 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 3 | ||
| PE3C0046/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 24 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0046/WP-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0046/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0046/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE35444/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 24 Inch Length Using RG178 Coax with HeatShrink and 180 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 24 inch length using RG178 coax with heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 24 inch length using RG178 coax with heatshrink and 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMCX cable connection on one end and a right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assembly has a plug gender on end 1 and a plug on end 2. PE35444/SP-24 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE35444/SP-24 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has an in-series connection. Our right angle MMCX plug to right angle MMCX plug cable has a maximum VSWR of 1.4:1. MMCX male to MMCX male cable assembly PE35444/SP-24 is built with RG178 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. MMCX right angle male to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MMCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2114/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2114/WP-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2114/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2114/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2114/WP-24 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W07799/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-200 Coax with HeatShrink and 180 Deg. Clock., Radio frequency assembly BNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-200 coax with heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-200 coax with heatshrink and 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle BNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W07799/SP-24 can also be known as a low loss right angle BNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07799/SP-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle BNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W07799/SP-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07799/SP-24 can also be used in the other direction and will be a right angle SMA male to right angle BNC male cable assembly if the opposite connectivity is required. Low loss BNC right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Venkel Ltd. | MELFC0204-TP-2491BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�5PPM;2.49K;�0.1% RoHS : Compliant | 0 | ||
| MELFC0207-VP-2492BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�5PPM;24.9K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-2460CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;246R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-2401BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;2.4K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-2460DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;246R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-2490UT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;249R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-2400BT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;240R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-2401UT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;2.4K;�0.01% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-2490CT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;249R;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-2441DT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;2.44K;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-2462AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;24.6K;�0.05% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-2402CT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;24K;�0.25% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-2440UT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;244R;�0.01% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-2492DT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;24.9K;�0.5% RoHS : Compliant | 0 | |||
| HPTF0805-RP-2402FT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;24K;�1% RoHS : Compliant | 0 | |||
 Vyrian | P-2408H-CCT | Cinch Connectivity Solutions | Rack and Panel Connector, 8 Contact(s), Male, Solder Terminal, Plug RoHS : Compliant | 16,493 | ||
| TLP2409(F) | Toshiba America Electronic Components | Transistor Output Optocoupler, 1-Element, 3750V Isolation RoHS : Compliant | 15,815 | |||
LFXP2-40E-6FN484C | Lattice Semiconductor Corporation | Field Programmable Gate Array, 435MHz, 40000-Cell, CMOS, PBGA484 RoHS : Compliant | 13,194 | |||
| DRP-240-24 | Mean Well Enterprises | AC-DC Power Factor Correction Module, 1 Output, 240W, Hybrid | 12,761 | |||
| HDP24-24-9SE | TE Connectivity | Circular Connector, 9 Contact(s), Female, Receptacle RoHS : Compliant | 12,075 | |||
| HDP24-24-35SN-L017 | TE Connectivity | Circular Connector, 35 Contact(s), Female, Receptacle RoHS : Compliant | 9,487 | |||
OP249ARC/883 | Analog Devices Inc | Operational Amplifier, 2 Func, 1000uV Offset-Max, JFET, CQCC20 RoHS : Not Compliant | 8,693 | |||
| ADP2442-EVALZ | Analog Devices Inc | RoHS : Compliant | 7,833 | |||
| PMP2493.3 | Texas Instruments | 7,652 | ||||
| TBP24S81JP4 | Texas Instruments | OTP ROM, 2KX4, 70ns, TTL, CDIP18 RoHS : Not Compliant | 7,267 | |||
| OP249FZ | Analog Devices Inc | Operational Amplifier, 2 Func, 1100uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 7,024 | |||
| TBP24SA81-55J4 | Texas Instruments | OTP ROM, 2KX4, 55ns, TTL, CDIP18 RoHS : Not Compliant | 6,897 | |||
| OP249ARCMDA | Analog Devices Inc | Operational Amplifier, 2 Func, 1000uV Offset-Max, CDIP8 | 6,860 | |||
| ADP2443ACPZN-R7 | Analog Devices Inc | Switching Regulator, Current-mode, 5.1A, 1800kHz Switching Freq-Max RoHS : Compliant | 6,089 | |||
| CP24BLY | Panduit Corp | Interconnection Device RoHS : Compliant | 782 | |||
 Waytek, Inc. | SNP24GHS0H4 | HellermannTyton | SNP24 Black Snapper Hose & Cable Clamp .984" - 1.134" Article 190-00119 |
| 1,192 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British