 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S18T2CJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DigiKey | ECS-184-S-18-TR | ECS International Inc | CRYSTAL 18.4320MHZ SERIES SMD RoHS : Compliant |
| 1,336 | |
| ECS-184-S-18-TR | ECS International Inc | CRYSTAL 18.4320MHZ SERIES SMD RoHS : Compliant |
| 1,336 | ||
ATS-18A-02-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 40X40X12.7MM XCUT T766 |
| 25 | ||
ATS-18B-23-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 60X60X15MM XCUT T766 |
| 25 | ||
ATS-18C-19-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 54X54X20MM XCUT T766 |
| 25 | ||
ATS-18C-44-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 25X25X15MM L-TAB T766 RoHS : Compliant |
| 25 | ||
ATS-18D-16-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 54X54X10MM XCUT T766 |
| 25 | ||
ATS-18A-183-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 40X40X20MM R-TAB T766 |
| 25 | ||
ATS-18B-100-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 45X45X25MM R-TAB T766 |
| 25 | ||
ATS-18C-129-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 60X60X10MM XCUT T766 |
| 25 | ||
| ATS-18C-130-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 60X60X15MM XCUT T766 |
| 25 | ||
| ATS-18C-154-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 40X40X15MM L-TAB T766 |
| 25 | ||
ATS-18C-178-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 35X35X25MM R-TAB T766 |
| 25 | ||
| ATS-18D-184-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 40X40X25MM R-TAB T766 |
| 25 | ||
| S18 | Klein Tools Inc | NUT DRIVR HEX SOCKET 9/16" 8.5" |
| 0 | ||
 Avnet Americas | MLG1005S18NJT000 | TDK Corporation | Multilayer Inductor, 18 nH, 0.6 ohm, 2 GHz, 350 mA, 0402 [1005 Metric], MLG Series - Tape and Reel (Alt: MLG1005S18NJT000) RoHS : Compliant |
| 30,000 | |
LD1117AS18TR | STMicroelectronics | LDO Regulator Pos 1.8V 1A 4-Pin(3+Tab) SOT-223 T/R - Tape and Reel (Alt: LD1117AS18TR) RoHS : Compliant |
| 10,000 | ||
| ECS-184-18-5PX-TR | ECS International Inc | Crystal, 18.432 MHz, SMD, 11.4mm x 4.8mm, 50 ppm, 18 pF, 30 ppm, CSM-7X Series - Tape and Reel (Alt: ECS-184-18-5PX-TR) RoHS : Compliant |
| 5,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| RWR80S1821FRS70 | Vishay Intertechnologies | Through Hole Resistor, 1.82 kohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S1821FRS70) RoHS : Not Compliant |
| 1,000 | ||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm - Tape and Reel (Alt: 16SVPS180M) RoHS : Compliant |
| 1,000 | ||
| RL181S-182J-RC | Bourns Inc | - Bulk (Alt: RL181S-182J-RC) RoHS : Compliant |
| 300 | ||
MCP23S18-E/SO | Microchip Technology Inc | I/O Expander 28-Pin SOIC W - Rail/Tube (Alt: MCP23S18-E/SO) RoHS : Compliant |
| 189 | ||
| ATS-HP-D3L100S18W-112 | Advanced Thermal Solutions Inc | HIGH PERFORMANCE COPPER HEAT PIPE - ROUN - Trays (Alt: ATS-HP-D3L100S18W-112) RoHS : Compliant |
| 100 | ||
| RWR81S1870FRB12 | Vishay Intertechnologies | Through Hole Resistor, 187 ohm, RWR Series, 1 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Bulk (Alt: RWR81S1870FRB12) RoHS : Not Compliant |
| 75 | ||
| AHDPBS-18-002 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDPBS-18-002) RoHS : Compliant |
| 68 | ||
| MTLW-103-05-G-S-185 | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 3 Contacts, Through Hole, MTLW Series - Bulk (Alt: MTLW-103-05-G-S-185) RoHS : Compliant |
| 38 | ||
| REF45W1ZVS184LMTOBO2 | Infineon Technologies AG | REF45W1ZVS184LMTOBO2 - Boxed Product (Development Kits) (Alt: REF45W1ZVS184LMTOBO2) RoHS : Not Compliant |
| 1 | ||
| REF60W1ZVS186EMTOBO2 | Infineon Technologies AG | REF60W1ZVS186EMTOBO2 - Boxed Product (Development Kits) (Alt: REF60W1ZVS186EMTOBO2) RoHS : Not Compliant |
| 1 | ||
| A8504952S18W | Amphenol Corporation | - Bulk (Alt: A8504952S18W) RoHS : Not Compliant |
| 1 | ||
 Newark | 1SS181,LF(T | Toshiba America Electronic Components | SMALL SIGNAL DIODE, 85V, 0.1A, TO-236; RoHS : Compliant |
| 5,371 | |
| 1SS181,LF(T | Toshiba America Electronic Components | SMALL SIGNAL DIODE, 85V, 0.1A, TO-236; RoHS : Compliant |
| 5,371 | ||
| B78108S1823J000 | TDK Corporation | INDUCTOR, 82UH, 0.39A, 6MHZ, AXIAL; RoHS : Compliant |
| 4,120 | ||
| MS-180(20) | Hirose Electric Co Ltd | RF COAX CONN, MS-180 JACK, 50 OHM, SMT; RoHS : Compliant |
| 3,000 | ||
| RTS1BS18N23S03 | Amphenol Sine Systems | RECEPTACLE, INLINE, 23 POSITIONS, SIZE 18, SOCKET CONTACT, SILICONE RUBBER SEAL ROHS COMPLIANT: YES RoHS : Compliant |
| 74 | ||
| AIO-BDPCS-18-11 | Amphenol Industrial Operations | BLANKING PLUG, DOME, 18MM, LT GRY, NYL; RoHS : Not Compliant |
| 50 | ||
| S186E | Banner Engineering Corp | PHOTOELECTRIC SENSOR, EZ BEAM; RoHS : Compliant |
| 15 | ||
| AC31S18A | Microchip Technology Inc | ADAPTER KIT, AVR MCU, MPLAB DEBUG/PROG; RoHS : Compliant |
| 14 | ||
| QS-1/8-10 | Festo | PUSH-IN FITTING, 10MM, R1/8; RoHS : Compliant |
| 13 | ||
| ICS18L50N14NOB2E1 | Carlo Gavazzi Holding AG | IND PROX SENSOR, 14MM, NPN/1NO, M18 X 1; Sensor Type:Inductive Proximity Sensor; Operating Temperature Max:85°C; Supply Voltage Min:8VDC; Supply Voltage Max:60VDC; Sensor Output Type:3-Wire, NPN, NO; Sensor Terminals:Cable RoHS Compliant: Yes RoHS : Compliant |
| 11 | ||
| DS1825U+T&R | Analog Devices Inc | DIGITAL THERMOMETER, 2DEG C, UMAX-8; RoHS : Compliant |
| 10 | ||
| DS1825U+T&R | Analog Devices Inc | DIGITAL THERMOMETER, 2DEG C, UMAX-8; RoHS : Compliant |
| 10 | ||
| QS186EQ8 | Banner Engineering Corp | SENSOR, TX, 20M, PNP, M12; RoHS : Compliant |
| 5 | ||
| REF45W1ZVS184LMTOBO2 | Infineon Technologies AG | REFERENCE DESIGN BOARD, ZVS FLYBACK CTRL; RoHS : Compliant |
| 5 | ||
| QS18EK6RV | Banner Engineering Corp | DISTANCE PHOTO; RoHS : Compliant |
| 4 | ||
 Analog Devices Inc | DS1811-5+ | Analog Devices Inc | 5V EconoReset with Open Drain RoHS : Compliant |
| 176,967 | |
| DS1834S+ | Analog Devices Inc | Dual EconoReset with Pushbutto RoHS : Compliant |
| 5,426 | ||
| LTC2337HMS-18#PBF | Analog Devices Inc | 18-B, 500ksps, ±10.24V True Bi RoHS : Compliant |
| 4,107 | ||
| DS1814AR-10+T&R | Analog Devices Inc | 5 Volt and 3.3 Volt MicroMonit RoHS : Compliant |
| 3,800 | ||
| DS1809U-010+ | Analog Devices Inc | Dallastat RoHS : Compliant |
| 3,618 | ||
| LTC2378CMS-18#PBF | Analog Devices Inc | 18-B, 1Msps, L Pwr SAR ADC w/ RoHS : Compliant |
| 2,628 | ||
| DS1815R-10+T&R | Analog Devices Inc | 3.3V EconoReset with Push-Pull RoHS : Compliant |
| 2,314 | ||
| LTC2326HMS-18#PBF | Analog Devices Inc | 18-B, 250ksps, ±10.24V True Bi RoHS : Compliant |
| 1,157 | ||
| DS1825U+T&R | Analog Devices Inc | Programmable Resolution 1-Wire RoHS : Compliant |
| 314 | ||
| LTC2327IMS-18#TRPBF | Analog Devices Inc | 18-B, 500ksps, ±10.24V True Bi RoHS : Compliant |
| 0 | ||
| DS1813R-5-U+ | Analog Devices Inc | 5V EconoReset with Pushbutton RoHS : Compliant | 0 | |||
| DS1845E-050+T&R | Analog Devices Inc | Dual NV Potentiometer and Memo RoHS : Compliant | 0 | |||
| DS1856B-M50+T&R | Analog Devices Inc | DUALTEMP 50K,3MON BGA W/FULL A RoHS : Compliant | 0 | |||
| DS1868BS-010+T/R | Analog Devices Inc | Dual 256-step digital potentio RoHS : Compliant |
| 0 | ||
| LTC2379HMS-18#TRPBF | Analog Devices Inc | 18-B, 1.6Msps, L Pwr SAR ADC w RoHS : Compliant |
| 0 | ||
 RS | QS-1/8-4-I (153012) | Festo | FITTING, PUSH-IN, QS-1/8-4-I |
| 101 | |
| QS-1/8-4 (153001) | Festo | PUSH-IN FITTING, 1R1/8 TO 4MM TUBE, NICKEL PLATED BRASS, QS SERIES |
| 97 | ||
| BC5-S18-Y1X (20060) | TURCK Inc | SENSOR, CAPACITIVE, M18, 5MM RANGE, 2 WIRE, 8.2VDC, NAMUR, 2 METER, M2006000 |
| 32 | ||
| QS18UPAQ8 (73156) | Banner Engineering Corp | ULTRASONIC PROXIMITY SENSOR,18 MM, RECTANGULAR, DIFFUSE,0.5M, PNP-NO/NC, M12 4-PIN |
| 24 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| BOS023U (BOS 18E-X-RS30-S4) | Balluff Inc | PHOTOELECTRIC SENSOR, THROUGH BEAM, 20M RANGE, 10-30 VDC, IP68, LED, BOS |
| 4 | ||
| ESS-20-SS (189296) | Festo | SUCTION/VACUUM CUP, RND FLAT, 20MM DIA, SILICONE, M6 MALE THRD |
| 3 | ||
| QS18VP6LDQ (73042) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, LASER DIFFUSE, 300MM, 10-30VDC, PNP, QD, QS18 |
| 2 | ||
| QS18UPAEQ8 (73166) | Banner Engineering Corp | QS18U WORLD-BEAM, ULTRASONIC REMOTE TEACH, RANGE, QS18U SERIES |
| 2 | ||
| QS18VP6DVSQ8 (805583) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, SMALL SPOT DIFFUSE, 250MM, 10-30VDC, PNP, QD, QS18 SERIES |
| 2 | ||
| BOS01CE (BOS 18M-PA-PR20-S4) | Balluff Inc | SENSOR, PHOTOELECTRIC RETROREFLECTIVE, M18, RED LIGHT, 7M, PNP, LO/DO, M12 |
| 2 | ||
| QS18VN6DQ (61652) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 450MM, 10-30VDC, NPN, QD, QS18 |
| 1 | ||
| QS18VP6DQ7 (66438) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 450MM, 10-30VDC, PNP, QD, QS18 |
| 1 | ||
| HWS1800T-24 (HWS1800T24) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,75A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES |
| 1 | ||
| S18 | Klein Tools Inc | 9/16" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 0 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 11,200 | ||
MCP1827S-1802E/EB | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
| MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 5,000 | ||
| MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,602 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 1,384 | ||
| MCP1827S-1802E/AB | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
MCP23S18-E/SP | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SPDIP, Projected EOL: 2035-09-30 RoHS : Compliant |
| 420 | ||
| MCP23S18-E/SO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2035-09-30 RoHS : Compliant |
| 323 | ||
| AC31S18A | Microchip Technology Inc | AVR Programming Adapter, Projected EOL: |
| 284 | ||
MCP23S18-E/MJ | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2035-10-02 RoHS : Compliant |
| 27 | ||
| AT68166H-YS18-E | Microchip Technology Inc | 16Mbit 512Kx32 SRAM MCM,18ns Prot, CQFP, Projected EOL: 2040-12-03 - Contact for Pricing RoHS : Compliant | 3 | |||
 Bisco Industries | NAS1801-3-15 | Heartland Precision Fasteners Inc | 3,397 | |||
| NAS1802-3-14 | Mac Fastteners Inc | 2,954 | ||||
| NAS1802-3-14 | Parker Fasteners | 64 | ||||
| NAS1801-3-15 | NAS HEX CAP SCREWS | 31 | ||||
| NAS1802-06-15 | NAS Screws | 23 | ||||
| NAS1829-4G16 | Lyn-Tron Inc | 19 | ||||
| NAS1801-6-5 | NAS HEX CAP SCREWS | 12 | ||||
| NAS1801-3D12 | NAS HEX CAP SCREWS | 9 | ||||
| NAS1829-4C10 | RAF Electronic Hardware | 9 | ||||
| NAS1802-3-14 | Heartland Precision Fasteners Inc | 7 | ||||
| NAS1802-3-25P | NAS HEX CAP SCREWS | 6 | ||||
| NAS1829-4E09 | NAS SPACERS/STANDOFFS/HANDLES | 4 | ||||
| BACS18AY3 | MISC. SPACERS/STANDOFFS/HANDLES | 3 | ||||
| NAS1802-3D4 | CBS Fasteners Inc | 2 | ||||
| NAS1802-6-20 | NAS HEX CAP SCREWS | 1 | ||||
 Rochester Electronics | PTVS18VP1UP,115 | NXP Semiconductors | Trans Voltage Suppressor Diode, 600W, 18V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 500 | |
PTVS18VP1UP,115 | Nexperia | Trans Voltage Suppressor Diode, 600W, 18V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 40,180 | ||
| NCP59151DS18R4G | onsemi | Fixed Positive LDO Regulator RoHS : Compliant |
| 3,947 | ||
NCV4276DS18G | onsemi | Fixed Positive LDO Regulator, 1.8V, 2.772V Dropout, BIPolar, PSSO5 RoHS : Compliant |
| 375 | ||
| CYD36S18V18-167BGXC | Infineon Technologies AG | CYD36S18 - Fullflex Synchronous Sdr Dual Port SRAM, Industrial Temp RoHS : Compliant |
| 2,364 | ||
| DS1809U-010+ | Analog Devices Inc | Pot Digital 1 Element 64 POS 10 kOhm 4.5V ±20% 8-SOP Tube RoHS : Compliant |
| 3,119 | ||
| DS1811-5+ | Analog Devices Inc | Supervisory Circuit 4.62V TO-226-3 Bag RoHS : Compliant |
| 31,000 | ||
LP3875ES-1.8/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 1.5A TO-263-6 Tube RoHS : Compliant |
| 1,107 | ||
LP3855ES-1.8 | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.38V Dropout, PSSO5 RoHS : Not Compliant |
| 11,025 | ||
CYD36S18V18-167BGXC | Cypress Semiconductor | CYD36S18 - Fullflex Synchronous Sdr Dual Port SRAM, Industrial Temp RoHS : Compliant |
| 410 | ||
DS1810-15+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.12V, CMOS, PBCY3 RoHS : Compliant |
| 2,685 | ||
DS1810R-15-U+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.12V, CMOS, PDSO3 RoHS : Compliant |
| 4,906 | ||
| DS18S20 | Maxim Integrated Products | DS18S20 High-Precision 1-Wire Digital Thermometer RoHS : Not Compliant |
| 109 | ||
| LP3855ES-1.8 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 1.8V, 0.38V Dropout, PSSO5 RoHS : Not Compliant |
| 186 | ||
| LP3875ES-1.8/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 1.8V 1.5A TO-263-6 Tube RoHS : Compliant |
| 864 | ||
 TME | DS1813R-10+ | Analog Devices Inc | IC: supervisor circuit; power on reset monitor (PoR); SOT23 |
| 2,077 | |
| BLS18 | Klein Tools Inc | Wrench-set; hex key,spherical; long; 18pcs. |
| 3 | ||
| BOS 18KF-PA-1LOC-S4-C | Balluff Inc | Sensor: photoelectric; Range: 0÷0.35m; PNP; DARK-ON,LIGHT-ON; PBT |
| 2 | ||
| BS 18 L BL Q | Metabo Power Tools | Drill/driver; drilling,screwdriving; 0÷500rpm,0÷1700rpm |
| 1 | ||
| BAS281-GS18 | Vishay Intertechnologies | Diode: Schottky switching; QuadroMELF,SOD80; SMD; 40V; 30mA RoHS : Compliant |
| 0 | ||
CMS-181325-078L100 | Same Sky | Loudspeaker; miniature; 700mW; 8Ω; 18x13x2.5mm; 10kHz; PEEK RoHS : Compliant |
| 0 | ||
| CMS-181325-078L100B | Same Sky | Loudspeaker; miniature; 700mW; 8Ω; 18x13x2.5mm; 10kHz; PEEK RoHS : Compliant |
| 0 | ||
| CMS1-8-R | Eaton Electronics | Inductor: common mode; SMD; 51.2uH; 2.2A; 9.4x7.2x2.6mm; 26mΩ |
| 0 | ||
| AHDMBS-18-001 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
| BAS282-GS18 | Vishay Intertechnologies | Diode: Schottky switching; QuadroMELF,SOD80; SMD; 50V; 30mA RoHS : Compliant |
| 0 | ||
| BZT55B18-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 18V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
| CF1WS-18R | SR Components Inc | Resistor: carbon film; 18Ω; THT; 1W; ±5%; 500V; Ø0.6x26mm; Ø3.2x9mm |
| 0 | ||
| DS1810-10+ | Analog Devices Inc | IC: supervisor circuit; power on reset monitor (PoR); push-pull RoHS : Compliant |
| 0 | ||
| DS1822+T&R | Analog Devices Inc | IC: temperature sensor; digital thermometer; -55÷125°C; TO92; THT RoHS : Compliant |
| 0 | ||
| DS1882Z-050+ | Analog Devices Inc | IC: digital potentiometer; I2C; 45kΩ; 5bit; SO16; SMD; Ch: 2 RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | PTVS18VU1UPAZ | Nexperia | TVS DIODE 18VWM 29.2VC 3DFN RoHS : Compliant | 1,530,000 | ||
TVS1801DRBR | Texas Instruments | RoHS : Compliant | 57,000 | |||
| SS18 | onsemi | SS18 Series 850 mV 1 A 80 V Max Reverse Voltage Schottky Rectifier - DO-214AC RoHS : Compliant | 22,500 | |||
| KDS184-RTK/P | KEC | 9,000 | ||||
| DS18B20U+T&R | Analog Devices Inc | DS18B20 Series 5.5 V Surface Mount 1-Wire Digital Thermometer - uMAX-8 RoHS : Compliant | 9,000 | |||
| LD1117S18TR | STMicroelectronics | LD1117 Series 1300 mA 1.8 V Fixed Output Positive Voltage LDO Regulator- SOT-223 RoHS : Compliant | 7,580 | |||
| NCP161AFCS180T2G | onsemi | 450mA,1.8V,LDO for RF and Analog Circuit RoHS : Compliant | 5,000 | |||
| VS18VUA1LAMTR | ROHM Semiconductor | RoHS : Compliant |
| 2,600 | ||
| NS18B20-QTOS | Suzhou Novosense Microelectronics Co Ltd | 2,000 | ||||
| DS1804Z-050+ | Analog Devices Inc | DS1804 Series 100 Tabs Up-Down/Increment Control 50 kOhm Digital POT - SOIC-8 RoHS : Compliant | 100 | |||
| VS18VUA1LBTBR1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS18VUA1LAMTFTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS18VUA1VWMTFTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| DS1804Z-010+ | Analog Devices Inc | Hong Kong RoHS : Compliant | 100 | |||
| VS18VUA1VWMTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
 ComSIT USA | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 3,413 | ||
| 600S180FT250XT | AMERICAN TECHNICAL CERAMICS/AVX/KYOCERA AVX | AVAILABLE EU | 1,496 | |||
| S1812R152K | API Delevan | AVAILABLE EU | 317 | |||
| ZM4734AGS18 | Vishay Intertechnologies | AVAILABLE EU | 5,882 | |||
| WF25S181JTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 937 | |||
| 0603CS18NXJLW | Coilcraft Inc | AVAILABLE EU | 3,932 | |||
| LEDS1826 | Essentra Components | AVAILABLE EU | 245 | |||
| DS1845E010+TR | Maxim Integrated Products | AVAILABLE EU | 2,017 | |||
| DS1818R20+TR | Analog Devices Inc | AVAILABLE EU | 461 | |||
| MKS185460404 | Stocko Contact GmbH & Co Kg | AVAILABLE EU | 168 | |||
| LL4148GS18 | Vishay Intertechnologies | AVAILABLE EU | 14,351 | |||
| DS1825U+TR | DALLAS SEMI/MAXIM INTEGRATED/ANALOG DEVICES | AVAILABLE EU | 25 | |||
ComSIT USA | TZMC3V3GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 3.3V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 40,000 | ||
| CS18LV10245EIR55 | Chiplus Semiconductor Corp | 128K-WORD BY 8 BIT HIGH SPEED SUPER LOW POWER SRAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Compliant | 23,236 | |||
| ZMY51GS18 | Vishay Semiconductors | ZENER DIODE Zener Diode, 51V V(Z), 5.88%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 18,440 | |||
| S07JGS18 | Vishay Intertechnologies | STANDARD RECOVERY RECTIFIER HIGH VOLTAGE SURFACE MOUNT Rectifier Diode, 1 Phase, 1 Element, 0.7A, 600V V(RRM), Silicon, DO-219AB RoHS : Compliant | 15,830 | |||
| LD1117AS18TR | STMicroelectronics | LOW DROP FIXED POSITIVE VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 11,880 | |||
| BZX384C7V5GS18 | tfk | Zener Diode, 7.5V V(Z), 5%, 0.2W RoHS : Not Compliant | 10,000 | |||
| BAS4006VGS18 | Vishay Intertechnologies | DUAL, SMALL SIGNAL SCHOTTKY DIODE Rectifier Diode, Schottky, 2 Element, 0.2A, 40V V(RRM), Silicon RoHS : Compliant | 8,885 | |||
| BAS4005VGS18 | Vishay Intertechnologies | DUAL, SMALL SIGNAL SCHOTTKY DIODE Rectifier Diode, Schottky, 2 Element, 0.2A, 40V V(RRM), Silicon RoHS : Compliant | 8,015 | |||
| RG1V226M05011CS180 | Samwha Electronics | Aluminum electrolytic capacitor, 22uF, 50V, radial, Samwha RoHS : Not Compliant | 4,000 | |||
| CS18LV02563BIR70 | Chiplus Semiconductor Corp | 32K WORD BY 8 BIT HIGH SPEED SUPER LOW POWER SRAM Standard SRAM, 32KX8, 70ns, CMOS, PDSO28 RoHS : Compliant | 3,880 | |||
| S18BPHDSSLFSN | JST Manufacturing | 2.0 MM PITCH SHROUDED HEADER CONNECTOR Board Connector, 18 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal RoHS : Compliant | 3,750 | |||
TS1854IDT | STMicroelectronics | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 3000uV Offset-Max, BIPolar, PDSO14 RoHS : Compliant | 2,500 | |||
| HKC3330S18000LF | hkc | Electronic Component RoHS : Compliant | 146 | |||
| DS1844010 | Maxim Integrated Products | QUAD DIGITAL POTENTIOMETER Digital Potentiometer, 4 Func, 10000ohm, 2-wire Serial Control Interface, 64 Positions, CMOS, PDIP20 RoHS : Not Compliant | 120 | |||
| DS18S20 | Dallas Semiconductor | HIGH-PRECISION 1-WIRE DIGITAL THERMOMETER Serial Switch/Digital Sensor, 9 Bit(s), 0.50Cel, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant | 35 | |||
 Interstate Connecting Components | M85049/55S18W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 3 | |
| BACC45FS18-31PH | Cinch Connectivity Solutions | BACC PLUG 31#20 PIN | 0 | |||
| BACS18AY3 | Amphenol PCD | BOEING SPRING COIL | 0 | |||
| CIR020RFS1819PF80VO | ITT Interconnect Solutions | CIR020RFS-18-19P-F80-VO | 0 | |||
| M85049/112S18KZ09-6D | Amphenol PCD | M85049112S18KZ09-6D | 0 | |||
| M85049/112S18KZ09-6D | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/114S18TN08-6 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/114S18TN08-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield |
| 0 | ||
| M85049/114S18TW09-6 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant | 0 | |||
| M85049/114S18TW09-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield |
| 0 | ||
| M85049/146S18N06 | Amphenol PCD | M85049146S18N06 | 0 | |||
| M85049/55S18W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 0 | ||
| M85049/63S18N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| M85049/63S18N | Amphenol PCD | 38999 SI/II Backshell Tie Wrap |
| 0 | ||
| FRCIR02RFS1812SF80VO | ITT Interconnect Solutions | FRCIR02RFS-18-12S-F80-VO | 0 | |||
 NexGen Digital | RMC16S-181JTH50K | Kamaya Inc | 18,000 | |||
| RMC1/16S-181JTH99 | Kamaya Inc | 6,634 | ||||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 5,167 | |||
| 1008CS-180KXBC | Coilcraft Inc | 1,991 | ||||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| 1008HS-181TJBC | Coilcraft Inc | RoHS : Not Compliant | 875 | |||
| 1008CS-182XJBC | Coilcraft Inc | RoHS : Not Compliant | 814 | |||
| ECS-184-S-20A-TR | ECS International Inc | RoHS : Compliant | 524 | |||
| 1812LS-183XJBC | Coilcraft Inc | RoHS : Not Compliant | 500 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
| 0603LS-181XJLC | Coilcraft Inc | RoHS : Compliant | 60 | |||
| NAS186DD3C6.B | 40 | |||||
| DS1818R-5-U+ | Maxim Integrated Products | RoHS : Compliant | 13 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
 PEI Genesis | 85330ES1808S6 | SOURIAU-SUNBANK |
| 21 | ||
| 85330KS1831SNL | SOURIAU-SUNBANK |
| 11 | |||
| BACC45FS18-31PH | Cinch Connectivity Solutions |
| 0 | |||
| M85049/112S18KZ09-6D | Amphenol PCD |
| 0 | |||
| M85049/114S18TN08-6 | Amphenol PCD |
| 0 | |||
| M85049/114S18TW09-6 | Amphenol PCD |
| 0 | |||
| M85049/146S18N06 | Amphenol PCD |
| 0 | |||
| M85049/55S18W | Amphenol PCD |
| 0 | |||
| M85049/63S18N | Amphenol PCD |
| 0 | |||
| GA800YS18-34N | SOURIAU-SUNBANK |
| 0 | |||
| MS18237-2WT | Dialight |
| 0 | |||
| M83723/85S18317 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/97S18316 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/98S1808Y | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| 8D519S18PB | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
 Powell Electronics | MTLW-104-05-G-S-185 | Samtec Inc | .100 Low Prof Variable Post Height Termi RoHS : Compliant |
| 1,213 | |
| MTMM-103-03-T-S-188 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,014 | ||
| MTLW-104-08-G-S-180 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 833 | ||
| MTLW-108-07-G-S-189 | Samtec Inc | .100 Low Prof Variable Post Height Termi RoHS : Compliant |
| 692 | ||
| MTMM-105-05-T-S-180 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 686 | ||
| MTLW-104-09-T-S-180 | Samtec Inc | PCB Header, 2.00mm Pitch, Through-Hole, RoHS : Compliant |
| 665 | ||
| MTMM-106-06-L-S-180 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 564 | ||
| MTMM-107-10-G-S-187 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 501 | ||
| MTSW-150-07-L-S-180 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 231 | ||
| MTSW-112-08-T-S-185-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 137 | ||
| MTMM-132-03-T-S-180 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 77 | ||
| MTLW-136-07-T-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 77 | ||
| M85049/112S18KZ09-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 25 | ||
| M85049/114S18TW09-6 | Glenair Inc | ACCESSORIES - BACKSHELL RoHS : Not Compliant |
| 18 | ||
| M85049/114S18TN08-6 | Glenair Inc | ACCESSORIES - BACKSHELL |
| 17 | ||
 PUI | CBW57-HS-18A | 132 | ||||
| 0103-1P07S18TSAA01 | 5 | |||||
 Richardson RFPD | TS180M-5W | Spectrum Control | Conn SMA Terminator 0Hz to 18GHz 50Ohm ST M Gold RoHS : Compliant |
| 48 | |
| CCS-18S18C-T | Teledyne Relays | RF Coaxial Switch RoHS : Not Compliant | 0 | |||
| CS-18S18C-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Not Compliant | 0 | |||
| CCS-18S18O-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Not Compliant | 0 | |||
| CCS-18N14C | Teledyne Relays | RF Switch SP4T 0MHz to 12GHz 60dB RoHS : Compliant |
| 0 | ||
| AS186-302LF-EVB | Skyworks Solutions Inc | SWITCH EVAL BOARD RoHS : Compliant | 0 | |||
| CMDB12S1.8-14 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| ELXS181VSN102MQ40S | United Chemi-Con Inc | Cap Aluminum Lytic 1000uF 180V 20% (25.4 X 40mm) S RoHS : Compliant | 0 | |||
| ELXS181VSN152MR40S | United Chemi-Con Inc | Cap Aluminum Lytic 1500uF 180V 20% (30 X 40mm) Sna RoHS : Compliant | 0 | |||
| ELXS181VSN182MR45S | United Chemi-Con Inc | Cap Aluminum Lytic 1800uF 180V 20% (30 X 45mm) Sna RoHS : Compliant | 0 | |||
| ELXS181VSN222MA45S | United Chemi-Con Inc | Cap Aluminum Lytic 2200uF 180V 20%( 35 X 45mm) Sna RoHS : Compliant | 0 | |||
| ELXS181VSN391MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 390uF 180V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| ASPI-0412S-180M | Abracon Corporation | POWER INDUCTOR RoHS : Compliant | 0 | |||
| CMZF12S1.8-6000 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| CCS-18N48C | Teledyne Relays | RF COAXIAL SWITCH RoHS : Compliant | 0 | |||
 Rutronik | LL4148-GS18 | Vishay Intertechnologies | SI-DIODE 0,150A 100V MINIMELF RoHS : Compliant |
| 1,550,000 | |
| LL4151-GS18 | Vishay Intertechnologies | Fast Switching Diode 0,3A 75V MINIMELF RoHS : Compliant |
| 190,000 | ||
| TZMB15-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 15V 2% MINIMELF RoHS : Compliant |
| 110,000 | ||
| TZMB18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 100,000 | ||
| LL4448-GS18 | Vishay Intertechnologies | SI-DIODE 0,150A 100V MINIMELF RoHS : Compliant |
| 90,000 | ||
| BAV103-GS18 | Vishay Intertechnologies | SI - DIODE 0,25A 250V MINIMELF RoHS : Compliant |
| 40,000 | ||
| IS181GB | Isocom Components | COUPLER SMD-4 100-600% 5mA 5V RoHS : Compliant |
| 40,000 | ||
| TZMC3V9-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 3,9V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| MMZ1608S181ATD25 | TDK Corporation | MMZ1608R 180R 500mA Rdc=0,2R RoHS : Compliant |
| 12,000 | ||
| BCAP0360P270S18 | Maxwell Technologies | BCAP 360F 2,7V -0+20% 36x64 RoHS : Compliant |
| 11,000 | ||
| ZMY51-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 51V 5% MELF RoHS : Compliant |
| 10,000 | ||
| ZMY62-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 62V 5% MELF RoHS : Compliant |
| 10,000 | ||
| BZT55C24-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 24V 5% QUADROMELF RoHS : Compliant |
| 10,000 | ||
| PTS181216V050 | Eaton Electronics | 0.5A resettable PTC 16V 1812 RoHS : Compliant |
| 6,000 | ||
| CS1812KKX7RCBB223 | YAGEO Corporation | KC 22nF 1812 10% 1000V X7R STAG RoHS : Compliant |
| 6,000 | ||
 Chip 1 Exchange | RL1220S-180-F | INSTOCK | 75,238 | |||
| LD1117AS18TR | Sangdest Microelectronics (Nanjing) Co Ltd | INSTOCK | 54,433 | |||
| DS1870E-010+T&R | Maxim Integrated Products | INSTOCK | 3,158 | |||
| AS-18.432-20 | Raltron Electronics Corporation | INSTOCK | 3,129 | |||
DS1832S/T&R | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 2,440 | |||
| DS1832S/T&R | DS | INSTOCK | 2,440 | |||
| DS1810-5 | INSTOCK | 998 | ||||
| 103318050 1/2-S 180R | INSTOCK | 800 | ||||
| DS18S20 | DS | INSTOCK | 460 | |||
| DS1816R-20/T&R | DS | INSTOCK | 430 | |||
| HOS18A10222 | INSTOCK | 360 | ||||
| DS1870E-010+T&R | Maxim Integrated Products | INSTOCK | 341 | |||
| 28S18020VSG | Zilog Inc | INSTOCK | 114 | |||
| AT93C66A-10US-1.8 | INSTOCK | 98 | ||||
| DS1810-10 | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 1 | |||
 Avnet Abacus | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 18 nH 036 ohm 22 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 40,000 | ||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 18 kohm 200 mA MMZE Series 15 ohm 25 (Alt: MMZ1005S182ET000) RoHS : Compliant | 40,000 | |||
| MMZ1005S182ETD25 | TDK Corporation | MMZ1005S182ETD25 (Alt: MMZ1005S182ETD25) RoHS : Compliant | 10,000 | |||
PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 16 VDC 11 A 22 A 05 s - Tape and Reel (Alt: PTS181216V110) RoHS : Compliant | 2,000 | |||
| ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | |||
ECM140US18 | XP Power | POWER SUPPLY 140WATT OPEN FRAME (Alt: ECM140US18) RoHS : Compliant | 10 | |||
| GCS180PS24-C | XP Power | (Alt: GCS180PS24-C) RoHS : Compliant | 0 | |||
| CAS18C100MAGGC | KEMET Corporation | Ceramic Suppression Capacitor 10 pF 20 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C100MAGGC) RoHS : Compliant | 0 | |||
| CAS18C102KARFC | KEMET Corporation | Ceramic Suppression Capacitor 1000 pF 10 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C102KARFC) RoHS : Compliant | 0 | |||
| CAS18C151MARFC | KEMET Corporation | Ceramic Suppression Capacitor 150 pF 20 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C151MARFC) RoHS : Compliant | 0 | |||
| CAS18C181GAGFC | KEMET Corporation | Ceramic Suppression Capacitor 180 pF 2 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C181GAGFC) RoHS : Compliant | 0 | |||
| CAS18C221KARFC | KEMET Corporation | Ceramic Suppression Capacitor 220 pF 10 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C221KARFC) RoHS : Compliant | 0 | |||
| CAS18C332KARGC | KEMET Corporation | Ceramic Suppression Capacitor 3300 pF 10 X2 250 VAC 1812 4532 Metric Surface Mount (Alt: CAS18C332KARGC) RoHS : Compliant | 0 | |||
LQW18AS18NG0ZD%20Wirewound.jpg) | Murata Manufacturing Co Ltd | (Alt: LQW18AS18NG0ZD) RoHS : Compliant | 0 | |||
Avnet Asia | PTVS18VS1UR,115 | Nexperia | Diode TVS Single Uni-Dir 18V 400W 2-Pin SOD-123W T/R (Alt: PTVS18VS1UR,115) RoHS : Compliant |
| 9,000 | |
| 8MS8-6MSSB-S183 | 3M Interconnect | (Alt: 8MS8-6MSSB-S183) RoHS : Compliant | 90 | |||
| EYGS182307 | Panasonic Electronic Components | Thrml Mgmt Access Thermal Interface 1000W/m.K (Alt: EYGS182307) RoHS : Compliant | 50 | |||
| PTVS18VP1UP,115 | Nexperia | TVS Diode, PTVS, Unidirectional, 18 V, 29.2 V, SOD-128, 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant |
| 0 | ||
| BAS85-GS18 | Vishay Intertechnologies | (Alt: BAS85-GS18) RoHS : Compliant | 0 | |||
| 1SS181,LF(T | Toshiba America Electronic Components | Diode Switching 85V 0.1A 3-Pin TO-236MOD T/R (Alt: 1SS181,LF(T) RoHS : Compliant | 0 | |||
| PTVS18VP1UTP,115 | Nexperia | TVS Diode, PTVS, Unidirectional, 18 V, 29.2 V, SOD-128, 2 Pins (Alt: PTVS18VP1UTP,115) RoHS : Compliant | 0 | |||
| CCS-180719-01-MP | Samtec Inc | SATCCS-180719-01-MP CUSTOM HDR COMPONENT (Alt: CCS-180719-01-MP) RoHS : Compliant | 0 | |||
| 1SS184,LF(T | Toshiba America Electronic Components | Diode Switching 85V 0.1A 3-Pin S-Mini (Alt: 1SS184,LF(T) RoHS : Compliant | 0 | |||
ECS-2520S18-250-FN-TR | ECS International Inc | Oscillator, 25 MHz, 10 ppm, SMD, 2.5mm x 2mm, 1.8 V, HCMOS, ECS-2520S (Alt: ECS-2520S18-250-FN-TR) RoHS : Compliant | 0 | |||
| PTS181233V075 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 33 VDC, 750 mA, 1.5 A, 0.2 s (Alt: PTS181233V075) RoHS : Compliant | 0 | |||
PTVS18VZ1USKYL | Nexperia | TVS Diode, Unidirectional, 18 V, 44 V, SOD-964, 2 Pins (Alt: PTVS18VZ1USKYL) RoHS : Compliant | 0 | |||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor, 18 nH, 0.36 ohm, 2.2 GHz, 300 mA, 0402 [1005 Metric], LQG15HS_02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 0 | |||
| LL4448-GS18 | Vishay Intertechnologies | (Alt: LL4448-GS18) RoHS : Compliant | 0 | |||
| BE70C-S-18SP-2-02-0305 | Samtec Inc | SATBE70C-S-18SP-2-02-0305 70 GHZ, BULLS (Alt: BE70C-S-18SP-2-02-0305) RoHS : Compliant | 0 | |||
 Avnet Silica | PTVS18VP1UP,115 | Nexperia | TVS Diode PTVS Unidirectional 18 V 292 V SOD128 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant | 141,000 | ||
| LD1117S18CTR | STMicroelectronics | LDO Regulator Pos 18V 13A 4Pin3Tab SOT223 TR (Alt: LD1117S18CTR) RoHS : Compliant | 117,500 | |||
TS1871AIYLT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AIYLT) RoHS : Compliant | 111,000 | |||
TS1874IPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IPT) RoHS : Compliant | 42,500 | |||
| LD1117S18TR | STMicroelectronics | Fixed LDO Voltage Regulator 15V in 11V Dropout 18V950mA out SOT2233 (Alt: LD1117S18TR) RoHS : Compliant | 42,500 | |||
| LD1117AS18TR | STMicroelectronics | LDO Regulator Pos 18V 1A 4Pin3Tab SOT223 TR (Alt: LD1117AS18TR) RoHS : Compliant | 30,000 | |||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
| TS1874AIYPT | STMicroelectronics | Operational Amplifier RRIO 4 Channels 18 MHz 06 Vs 18V to 6V TSSOP 14 Pins (Alt: TS1874AIYPT) RoHS : Compliant | 12,500 | |||
| TS1871AILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AILT) RoHS : Compliant | 9,000 | |||
| TS1872IDT | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin SO N TR (Alt: TS1872IDT) RoHS : Compliant | 7,500 | |||
| TS1871ILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871ILT) RoHS : Compliant | 6,000 | |||
| TS1874IYPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IYPT) RoHS : Compliant | 2,500 | |||
| TS1874AIYDT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin SOIC TR (Alt: TS1874AIYDT) RoHS : Compliant | 2,500 | |||
| MCP23S18-E/MJ | Microchip Technology Inc | IO Expander 16 bit I2C Serial SPI 18 V 55 V QFN 24 Pins (Alt: MCP23S18-E/MJ) RoHS : Compliant | 91 | |||
| 71V25761S183PFGI | Renesas Electronics Corporation | (Alt: 71V25761S183PFGI) RoHS : Compliant | 72 | |||
 Braemac Americas-Symmetry | EC7B-48S18NS | Cincon Electronics Corporation | Isolated DC/DC Converters 10.8-20W 36-75 Vin 1.8Vout 6A RoHS : Compliant |
| 0 | |
| AMMLPFLBVRS-18.4320T | Abracon Corporation |
| 0 | |||
ASPI-0315S-181M-T | Abracon Corporation | RoHS : Unknown |
| 0 | ||
ASPI-0312FS-180M-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPFLBVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPDAVCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPEAVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLAXCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVALCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPDBLCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPEBLJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLAVRS-18.4320T | Abracon Corporation |
| 0 | |||
| O-CE70S18EW-P-E-N-R-10.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0428S-181M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 DB Roberts | TPS-187-6 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 305,236 | |
| TPS-187-8 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 59,537 | ||
| NAS1802-06-8 | Military Specifications |
| 53 | |||
| D4-A35T48DSS18PSNA | Southco | D4-A35T48DSS18PSNA | 0 | |||
| D4-AW5T11DSS18PSNA | Southco | D4-AW5T11DSS18PSNA | 0 | |||
| CHC-S18GC | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| NAS1829C4C09 | RAF Electronic Hardware | 0 | ||||
| LCBS-18-19 | Essentra Components | CB SptDual LckNatural1-1/8 in Spc CB Spt Dual Lock Natural | 0 | |||
| D4-A5T32DSS18PSNA | Southco | D4-A5T32DSS18PSNA | 0 | |||
| S-180-10 | Shercon Inc | 0 | ||||
| RS-1811-0937 | Heyco | RS 0187 OD X115 ID X937 LG NAT | 0 | |||
| BOS-180 | Sugatsune Kogyo Co Ltd | 0 | ||||
| NAS1831C3B04 | RAF Electronic Hardware | NAS1831C3B04-RAF STEEL 303 STANDOFFS | 0 | |||
| TCBS-18-19 | Essentra Components | CB SPT,THRD FEM,NAT,1-1/8 IN S | 0 | |||
| NAS1831C6E64 | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | S07M-GS18 | Vishay Intertechnologies | (Alt: S07M-GS18) RoHS : Compliant | 560,000 | ||
| BZT55B9V1-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B9V1-GS18) RoHS : Compliant | 80,000 | |||
| TZMC4V3-GS18 | Vishay Intertechnologies | (Alt: TZMC4V3-GS18) RoHS : Compliant | 50,000 | |||
| VLMV3100-GS18 | Vishay Intertechnologies | SMDLED RED GREEN PLCC3e3 (Alt: VLMV3100-GS18) RoHS : Compliant | 48,000 | |||
| BAS81-GS18 | Vishay Intertechnologies | (Alt: BAS81-GS18) RoHS : Compliant | 40,000 | |||
| TZMB5V6-GS18 | Vishay Intertechnologies | (Alt: TZMB5V6-GS18) RoHS : Compliant | 30,000 | |||
RS07K-GS18 | Vishay Intertechnologies | (Alt: RS07K-GS18) RoHS : Compliant | 20,000 | |||
| LL4448-GS18 | Vishay Intertechnologies | (Alt: LL4448-GS18) RoHS : Compliant | 20,000 | |||
| TZMC3V3-GS18 | Vishay Intertechnologies | (Alt: TZMC3V3-GS18) RoHS : Compliant | 20,000 | |||
| TZMC3V9-GS18 | Vishay Intertechnologies | (Alt: TZMC3V9-GS18) RoHS : Compliant | 10,000 | |||
| VS-18TQ045STRL-M3 | Vishay Intertechnologies | Schottky D2PAKe3 (Alt: VS-18TQ045STRL-M3) RoHS : Compliant | 5,600 | |||
| ZMY6V2-GS18 | Vishay Intertechnologies | (Alt: ZMY6V2-GS18) RoHS : Compliant | 5,000 | |||
| VS-18TQ045-M3 | Vishay Intertechnologies | (Alt: VS-18TQ045-M3) RoHS : Compliant | 4,500 | |||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode Switching 85V 03A 3Pin SMini TR (Alt: 1SS184(TE85L,F)) RoHS : Compliant | 3,000 | |||
| MCP23S18-E/SO | Microchip Technology Inc | IO Expander 28Pin SOIC W (Alt: MCP23S18-E/SO) RoHS : Compliant | 54 | |||
 Flip Electronics | Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | ||
| FAN2558S18X | onsemi | Stock, Ship Today RoHS : Compliant | 7,702 | |||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 4,885 | |||
| NCV59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant | 2,976 | |||
| NCP5663DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant | 2,400 | |||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| NCP59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant | 800 | |||
| Z8S18020FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 725 | |||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant | 700 | |||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
| NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant | 297 | |||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
| IDT80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
 Maritex | ITR8307/S18/TR8(B) | Everlight Electronics Co Ltd | Photoelectric Sensors; ITR8307/S18/TR8(B); EVERLIGHT |
| 59,430 | |
| ULN2803G-S18-R | Unisonic Technologies Co Ltd | Bipolar Transistors (BJT); ULN2803G-S18-R; UTC RoHS : Compliant |
| 12,830 | ||
| FPV160808S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 18VDC; 40pF RoHS : Compliant |
| 3,880 | ||
| FPV201209S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0805; 18VDC; 45pF RoHS : Compliant |
| 3,000 | ||
| DCPS1821W-CT | CONNTHERM | DC plug; female; inner diameter 2.1mm; outer diameter 5.5mm |
| 2,600 | ||
| ADBMS1818ASWZ-RL | Analog Devices Inc | Battery Management ICs; ADBMS1818ASWZ-RL; ANALOG DEVICES; 64 RoHS : Compliant |
| 2,514 | ||
| K5B FS 18X5X8-1.0-01 | King Core Electronics Inc | Ferrite core for flat cable EMI-RP19x6.5x8/RC10,/3528pcs/ RoHS KingCore |
| 2,432 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 22E | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x470K; 1/8W; 5% |
| 2,389 | ||
| LD1117S18CTR | STMicroelectronics | LDO Regulators; LD1117S18CTR; STMICROELECTRONICS; 800 mA; Fixed; 1; 1.8 V RoHS : Compliant |
| 2,014 | ||
| ZG05L2-4S-1.8HU/R | Hirose Electric Co Ltd | USB/DVI/HDMI Accessories; ZG05L2-4S-1.8HU/R; HIROSE ELECTRIC |
| 1,133 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 220K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x220K; 1/8W; 5% |
| 663 | ||
| DS18B20Z+T&R | Analog Devices Inc | Temperature Sensors; DS18B20Z+T&R; ANALOG DEVICES; 8 RoHS : Compliant |
| 209 | ||
| DS1818R-10+T&R | Analog Devices Inc | Power Monitors; DS1818R-10+T&R; ANALOG DEVICES; 1 V; 5.5 V RoHS : Compliant |
| 22 | ||
| EG-S180P24-2-V20W90 10W 6500K IP20 | NiViss | LED strip; Tile type; vertical&horizontal bending; cool white 6500K; CRI min. 90; 24V; 500x250 mm; 180LED/piece; 10 W; IP20; cut every 50mm/83.3mm; buttons entry; 0.5 m piece |
| 9 | ||
| DS18B20+T&R | Analog Devices Inc | Temperature Sensors; DS18B20+T&R; ANALOG DEVICES; 3; 9.4 mm; TO-92-3 RoHS : Compliant |
| 3 | ||
 Master Electronics | CCS-18S180-T | Teledyne Coax Switches | RF Switch Commercial DC-12GHz SMA Failsafe SP8T TTL RoHS : Compliant |
| 2 | |
| MDS-100BPS18BA | Delta Power | AC-DC Power Supply - Medical - 100W - 18VDC - 5.50A - Open Frame - JST 2-pin - 2.0˝×4.0˝×1.25˝ RoHS : Compliant |
| 2 | ||
| IDSS-18-S-18.00 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CIR020RFS-18-5P-F80-T39-VO | ITT Interconnect Solutions | Circular Connector - Receptacle - Male Pins - 3 Position - Shell Size-Insert 18-5 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Compliant |
| 0 | ||
| CCS-18N130 | Teledyne Coax Switches | RF Switch Commercial - 50 Ohms - 28VDC Coil - DC-12GHz - Normally-Open - SP3T - N-Female RoHS : Compliant |
| 0 | ||
| CCS-18N14C | Teledyne Coax Switches | RF Switch Commercial - 50 Ohms - 28VDC Coil - DC-12GHz - Normally-Open - SP4T - N-Female - Opt: Indicator-Contacts RoHS : Compliant |
| 0 | ||
| HCMD-05-S-18.00-01-S-ST3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-05-S-18.00-01-ST3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-05-S-18.00-02-ST8-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-07-S-18.00-02-S | Samtec Inc | IDC SOCKET AND TERMINAL C RoHS : Compliant |
| 0 | ||
| HCMD-08-S-18.00-01-ST8-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-15-S-18.00-01-S | Samtec Inc | .100 Double Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| HCMS-18-T-84.00-02-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCSD-05-S-18.00-01-N-G-ST2 | Samtec Inc | .100 Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| HCSD-05-S-18.00-01-N-ST4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C2603LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2603LF/HS-180 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2603LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder. |
| 218 | |
| PE3C1509LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to 2.92mm Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to 2.92mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to 2.92mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 2.92mm cable connection on the other. Our SMA to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3C1509LF/HS-18 can also be known as a SMA plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 2.92mm plug cable assembly PE3C1509LF/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1509LF/HS-18 can also be used in the other direction and will be 2.92mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 2.92mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 2.92mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. |
| 69 | ||
| PE3W17710/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-180 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-180 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3C5770LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to 2.4mm Male Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770LF/HS-18 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770LF/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder. |
| 31 | ||
| PE3W00453/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Mini SMP Female to SMA Male Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly mini SMP female to SMA male cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to SMA male cable 18 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and SMA cable connection on the other. Our mini SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE3W00453/HS-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Mini SMP jack to SMA plug cable assembly PE3W00453/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3W00453/HS-18 RF cable are available on our downloadable PDF datasheet.PE3W00453/HS-18 can also be used in the other direction and will be SMA male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3C0050/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0050/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0050/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0050/HS-180 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 1 | ||
| PE39439/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Right Angle Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE39439/HS-18 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE39439/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39439/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE39439/HS-18 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0099/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to SMP Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C0099/HS-18 can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C0099/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3C4439/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Female to SSMC Plug Cable 18 Inch Length Using RG316-DS Coax with HeatShrink., Pasternack’s PE3C4439/HS-18 SMA female to SSMC plug RF cable assembly using RG316-DS coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and a SSMC cable connection on the other. Our SMA to SSMC cable assembly has a female gender on end 1 and a plug on end 2. PE3C4439/HS-18 can also be known as a SMA jack to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. SMA to SSMC cable from Pasternack is ideal for applications including ssmc cable general purpose test, data acquisition systems, a, d conversion systems, ultra wideband digital receivers and software defined radio (sdr). This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C4439/HS-18 RF cable has an FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. Our SMA female to SSMC plug cable has a maximum VSWR of 1.5:1. This PE3C4439/HS-18 SMA jack to SSMC male cable assembly is built with RG316-DS, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C4439/HS-18 can also be used in the other direction and will be a SSMC plug to SMA female cable assembly if the opposite connectivity is required. This SMA jack to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4440/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SSMC Plug Cable 18 Inch Length Using RG316-DS Coax with HeatShrink., Pasternack’s PE3C4440/HS-18 SMA female bulkhead to SSMC plug RF cable assembly using RG316-DS coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA bulkhead cable connection on one end and a SSMC cable connection on the other. Our SMA to SSMC cable assembly has a female gender on end 1 and a plug on end 2. PE3C4440/HS-18 can also be known as a SMA jack to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. SMA to SSMC cable from Pasternack is ideal for applications including ssmc cable general purpose test, data acquisition systems, a, d conversion systems, ultra wideband digital receivers and software defined radio (sdr). This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C4440/HS-18 RF cable has an FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. Our bulkhead SMA female to SSMC plug cable has a maximum VSWR of 1.5:1. This PE3C4440/HS-18 SMA jack to SSMC male cable assembly is built with RG316-DS, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C4440/HS-18 can also be used in the other direction and will be a SSMC plug to SMA female bulkhead cable assembly if the opposite connectivity is required. This SMA jack bulkhead to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17431/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Right Angle Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly N male to N male right angle cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17431/HS-18 can also be known as a type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17431/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17431/HS-18 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W08827/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W08827/HS-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08827/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W08827/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder (without contact) attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08827/HS-18 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01814/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01814/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01814/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01814/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0874/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. QMA Male to Limited Detent SMP Male Bulkhead Cable 18 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly QMA male to limited detent SMP male bulkhead cable 18 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to limited detent SMP male bulkhead cable 18 inch length using RG405 coax with heatshrink, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and SMP bulkhead cable connection on the other. Our QMA to SMP cable assemblies have a male gender on end 1 and male on end 2. PE3C0874/HS-18 can also be known as a QMA plug to SMP plug cable assembly and will be shipped same-day as it is purchased. QMA plug to SMP plug cable assembly PE3C0874/HS-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid QMA cable assembly is manufactured with QMA to SMP cable connectors, has a 50 Ohm impedance. RF specs on this QMA male to SMP male bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0874/HS-18 can also be used in the other direction and will be SMP male bulkhead to QMA male cable assembly if the opposite connectivity is required. QMA plug to SMP plug bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMP cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to limited detent SMP male bulkhead cable 18 inch length using RG405 coax with heatshrink. |
| 0 | ||
| PE3W02597/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to Mini SMP Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female to mini SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to mini SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to mini SMP cable assembly orders will ship same day as well. Pasternack RF coax formable cable assembly is built with SMP cable connection on one end and mini SMP cable connection on the other. Our formable SMP to mini SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W02597/HS-18 can also be known as a formable SMP jack to mini SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to mini SMP jack cable assembly PE3W02597/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to mini SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02597/HS-18 can also be used in the other direction and will be mini SMP female to SMP female cable assembly if the opposite connectivity is required. Formable SMP jack to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to mini SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to mini SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
 Sager | B1200HS18FT6INPG | ABB Group | Wire Ducting & Raceways | 0 | ||
| ATS-18A-02-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
| ATS-18A-164-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 |
| 0 | ||
| ATS-18A-177-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| ATS-18A-183-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
ATS-18A-188-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
| ATS-18A-203-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-18B-04-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
| ATS-18B-100-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| ATS-18B-118-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
ATS-18B-124-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
ATS-18B-17-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
ATS-18B-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-18B-23-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
ATS-18B-28-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
 TE Connectivity | WHDS-18-2 | TE Connectivity | STRAIN RELIEF, HD30, 18SZ, RA Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | Automotive Connector Accessories | Part Number: WHDS-18-2 | Internal Number: WHDS-18-2 | Alias Number: ZPF000000000131686 | TE Connectivity RoHS : Compliant |
| 1,420 | |
| HSC100S18RJ | TE Connectivity | HSC100S 18R 5% Screw Terminal Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 18 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S18RJ | Internal Number: 3-2176731-1 | TE Connectivity RoHS : Compliant |
| 27 | ||
| HSC150S18KJ | TE Connectivity | HSC150S 18K 5% Screw Terminal Resistance Value: 18K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 18K Ω Wire Wound 5 % Power Resistor | Part Number: HSC150S18KJ | Internal Number: 6-2176732-4 | TE Connectivity RoHS : Compliant |
| 21 | ||
| HSC100S180RJ | TE Connectivity | HSC100S 180R 5% Screw Terminal Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 180 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S180RJ | Internal Number: 4-2176731-3 | TE Connectivity RoHS : Compliant |
| 14 | ||
 Venkel Ltd. | WRFI0402-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�2% RoHS : Not Compliant | 44,000 | ||
| WRFI0603-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�10% RoHS : Not Compliant | 8,000 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-181MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SS18W-EVL | VENKEL LTD | Rectifier;SMA;80V;1A RoHS : Not Compliant | 0 | |||
| WRFI1008-S-18NJT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�5% RoHS : Not Compliant | 0 | |||
| SHPI121210S-181MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| WRFI0805-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0603-S-18NGT-13 | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI737345S-181MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| WRFI0402-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-181MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI121245S-181MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;180uH;�20% RoHS : Compliant | 0 | |||
 Vyrian | MCS1802GS-10-Z | Monolithic Power Systems | Current Sensor, 8 Pin, Plastic/epoxy RoHS : Compliant | 14,643 | ||
| GCS180PS24-C | XP Power | AC-DC Regulated Power Supply Module, 1 Output, 187W, Hybrid RoHS : Compliant | 14,488 | |||
| LTC2378CMS-18-PBF | Analog Devices Inc | 12,204 | ||||
MAX6388XS18D3-T | Maxim Integrated Products | Power Supply Support Circuit, Adjustable, 2 Channel, BICMOS, PDSO4 RoHS : Not Compliant | 11,643 | |||
| MAX6422XS18+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +1.8V, BICMOS, PDSO4 RoHS : Compliant | 11,235 | |||
| LTC2379HMS-18-TRPBF | Analog Devices Inc | 11,014 | ||||
| LTC2327IMS-18#TRPBF | Analog Devices Inc | ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 10,460 | |||
| LTC2326HMS-18-PBF | Analog Devices Inc | 8,732 | ||||
| LTC2337HMS-18#PBF | Analog Devices Inc | ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 8,397 | |||
| LP38511S-1-8EV | Texas Instruments | 8,130 | ||||
| LP3873ES-1.8 | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 1.2V Dropout, CMOS, PSSO5 RoHS : Not Compliant | 3,404 | |||
| LP3962ES-1-8-NOPB | Texas Instruments | 3,225 | ||||
| LP3964ES-1-8 | Texas Instruments | 3,191 | ||||
| CAS18C102KARFC | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1812 | 468 | |||
| GDZ36B-V-GS18 | Vishay Intertechnologies | Zener Diode, 36V V(Z), 2.5%, 0.2W, Silicon, Unidirectional RoHS : Compliant | 414 | |||
 Win Source Electronics | BAS85-GS18 | Vishay Huntington | DIODE SCHOTTKY 30V 200MA SOD80 / Small Signal Schottky Diode |
| 460,000 | |
| DS1832S | Maxim Integrated Products | IC SUPERVISOR 1 CHANNEL 8SOIC / 3.3-Volt MicroMonitor Chip RoHS : Not Compliant |
| 85,000 | ||
| DS18B20U | Nexperia | 11 B -55 ~ 125C 1-WIRE DIGITAL, |
| 69,000 | ||
| DS18S20Z+T | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8SOIC |
| 46,280 | ||
| DS1804Z-010 | Maxim Integrated Products | IC DGTL POT 10KOHM 100TAP 8SOIC RoHS : Not Compliant |
| 30,000 | ||
SN75ALS181NSRG4 | Texas Instruments | IC DIFF LINE DRVR/RCVR 14SO RoHS : Compliant |
| 20,720 | ||
| DS18S20 | Maxim Integrated Products | IC THERM MICROLAN HI-PREC TO-92 / Temperature Sensor 9 b TO-92-3 RoHS : Not Compliant |
| 20,000 | ||
| S07M-GS18 | Vishay Huntington | DIODE GEN PURP 1KV 700MA DO219AB |
| 20,000 | ||
| DS1818R-10T&R | Analog Devices Inc | Supervisory Circuits 3.3V EconoReset with Pushbutton |
| 18,888 | ||
| DS1832S/T&R | Maxim Integrated Products | IC SUPERVISOR 1 CHANNEL 8SOIC RoHS : Not Compliant |
| 13,850 | ||
DS1830A+ | Maxim Integrated Products | IC SEQUENCER RESET PB 3.3V 8-DIP RoHS : Compliant |
| 11,433 | ||
| DS1818R-5 | Maxim Integrated Products | IC 3.06V W/PB 5% SOT23-3 RoHS : Not Compliant |
| 9,943 | ||
| LD1117AS18TR | STMicroelectronics | IC REG LDO 1.8V 1A SOT223 RoHS : Compliant |
| 8,950 | ||
| DS1825U+T&R | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8UMAX / Temp Sensor Digital Serial (1-Wire) 8-Pin uMAX T/R RoHS : Compliant |
| 7,730 | ||
| DS1805E-010+ | Maxim Integrated Products | IC DGT POT 10KOHM 256TAP 14TSSOP RoHS : Compliant |
| 3,472 | ||
 Wuhan P&S | SM8S18AHE3_A/I | Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors RoHS : Compliant |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British