 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S20-R82K Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DigiKey | LPA-C011301S-20 | ITW Lumex | LIGHT PIPE 20MM SINGLE VERT SMD RoHS : Compliant |
| 15,143 | |
| ECS-200-S-20A-TR | ECS International Inc | CRYSTAL 20.0000MHZ SERIES SMD RoHS : Compliant |
| 3,282 | ||
| ECS-200-S-20A-TR | ECS International Inc | CRYSTAL 20.0000MHZ SERIES SMD RoHS : Compliant |
| 3,282 | ||
| ECS-200-S-20A-TR | ECS International Inc | CRYSTAL 20.0000MHZ SERIES SMD RoHS : Compliant |
| 282 | ||
| ES2000-NO.1-C1-0-38MM | POWELL ELECTRONICS | HEATSHRINK 0.225" X 0.125' BLACK |
| 250 | ||
| ES2000-NO.3-B8-0-38MM | POWELL ELECTRONICS | HEATSHRINK 0.427" X 0.125' BLACK |
| 250 | ||
| ES2000-NO.4-B7-0-27MM | POWELL ELECTRONICS | HEATSHRINK 0.7" X 0.088' BLACK |
| 250 | ||
| 770-004S205W1 | JRH ELECTRONICS | HEATSHRINK BOOT BLACK |
| 95 | ||
| 770-001S209W2 | JRH ELECTRONICS | HEATSHRINK BOOT BLACK |
| 43 | ||
| SNX-CBL-LDR-DS205-S200 | SANOXY | SANOXY Cables and Adapters; 5 PA |
| 20 | ||
| SNX-CBL-LDR-DS206-S200 | SANOXY | SANOXY Cables and Adapters; 10 P |
| 20 | ||
| SNX-CBL-LDR-DS201-S200 | SANOXY | SANOXY Cables and Adapters; 5 PA |
| 20 | ||
| SNX-CBL-LDR-DS204-S200 | SANOXY | SANOXY Cables and Adapters; 2 PA |
| 20 | ||
| SNX-CBL-LDR-DS207-S200 | SANOXY | SANOXY Cables and Adapters; 5 PA |
| 20 | ||
| S20 | Klein Tools Inc | NUT DRIVER HEX SOCKET 5/8" 8.5" | 0 | |||
 Avnet Americas | BMI-S-202-F | Qnity Laird | Shield, EMI, Surface Mount, 16.5 mm x 16.5 mm x 3.6 mm - Tape and Reel (Alt: BMI-S-202-F) RoHS : Compliant |
| 28,000 | |
STPS20M100SG-TR | STMicroelectronics | Schottky Rectifier, 100 V, 20 A, Single, TO-263 (D2PAK), 3 Pins, 850 mV - Tape and Reel (Alt: STPS20M100SG-TR) RoHS : Compliant |
| 13,000 | ||
ECS-200-12-33Q-JES-TR | ECS International Inc | Crystal, 20 MHz, SMD, 3.2mm x 2.5mm, 50 ppm, 12 pF, 20 ppm, ECX-33Q Series - Tape and Reel (Alt: ECS-200-12-33Q-JES-TR) RoHS : Compliant |
| 6,000 | ||
| ECS-200-20-23A-EN-TR | ECS International Inc | Crystal, 20 MHz, SMD, 6mm x 3.5mm, 50 ppm, 20 pF, 30 ppm, ECX-64A Series - Tape and Reel (Alt: ECS-200-20-23A-EN-TR) RoHS : Compliant |
| 5,000 | ||
| BMI-S-208-F | Qnity Laird | Two Piece Board EMI Shield Frame Cold Rolled Steel T/R - Tape and Reel (Alt: BMI-S-208-F) RoHS : Compliant |
| 3,900 | ||
| BMI-S-203-C | Qnity Laird | Shield, EMI, Surface Mount, 26.21 mm x 26.21 mm x 5.08 mm - Bulk (Alt: BMI-S-203-C) RoHS : Compliant |
| 2,550 | ||
NCS20072DR2G | onsemi | - Tape and Reel (Alt: NCS20072DR2G) RoHS : Compliant |
| 2,500 | ||
| ECS-200-20-30B-DU | ECS International Inc | Crystal 20MHz 20pF 4-Pin SMD T/R - Tape and Reel (Alt: ECS-200-20-30B-DU) RoHS : Compliant |
| 2,000 | ||
| ECS-2033-250-BN | ECS International Inc | Clock Oscillator 25MHz 3.3V 15pF 4-Pin SMD T/R - Tape and Reel (Alt: ECS-2033-250-BN) RoHS : Compliant |
| 2,000 | ||
| BMI-S-209-F-20-R | Qnity Laird | Cover for Standard Surface Mount RF Shield - Tape and Reel (Alt: BMI-S-209-F-20-R) RoHS : Compliant |
| 1,900 | ||
| ECS-200-20-4X | ECS International Inc | Crystal 20MHz 20pF 2-Pin HC-49/U - Bulk (Alt: ECS-200-20-4X) RoHS : Compliant |
| 1,177 | ||
| RWR80S2000FRS70 | Vishay Intertechnologies | Through Hole Resistor, 200 ohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S2000FRS70) RoHS : Not Compliant |
| 1,000 | ||
| DMS-20LCD-0-5-C | Murata Manufacturing Co Ltd | DC Voltmeter LCD 9.4mm ?200mV 3.5 Panel Mount - Boxed Product (Development Kits) (Alt: DMS-20LCD-0-5-C) RoHS : Compliant |
| 108 | ||
| RL07S201GB14 | Vishay Intertechnologies | - Bulk (Alt: RL07S201GB14) RoHS : Not Compliant |
| 100 | ||
| YFS-20-L3-H-08-SB-K | Samtec Inc | - Trays (Alt: YFS-20-L3-H-08-SB-K) RoHS : Not Compliant |
| 47 | ||
 Newark | QT49S-20.000MEEJ-T | TXC Corporation | XTAL, 20MHZ, 18PF, SMD, 12.7MM X 4.8MM; RoHS : Compliant |
| 1,990 | |
| QT49S-20.000MEEJ-T | TXC Corporation | XTAL, 20MHZ, 18PF, SMD, 12.7MM X 4.8MM; RoHS : Compliant |
| 1,990 | ||
| ECS-2016MV-250-CN-TR | ECS International Inc | OSCILLATOR, 25MHZ, HCMOS, SMD, 2MMX1.6MM; RoHS : Compliant |
| 1,367 | ||
| ECS-2016MV-250-CN-TR | ECS International Inc | OSCILLATOR, 25MHZ, HCMOS, SMD, 2MMX1.6MM; RoHS : Compliant |
| 1,367 | ||
| PRS11R-225F-S203A3 | Bourns Inc | ROTARY POTENTIOMETER, 20KOHM, 0.05W, THT; Track Resistance:20kohm; No. of Turns:1Turns; Track Taper:Log (Audio); Power Rating:50mW; Resistance Tolerance:± 20%; Product Range:PRS11R Series; Potentiometer Mounting:Through Hole RoHS Compliant: Yes RoHS : Compliant |
| 955 | ||
| TW-05-02-L-S-200-070 | Samtec Inc | CONN STACK BRD, 2MM, 5POS, HDR; RoHS : Compliant |
| 640 | ||
| QT325S-20.000MEIE-T | TXC Corporation | 3.2X2.5 GLASS SEAL MHZ QUARTZ CRYSTAL; RoHS : Compliant |
| 500 | ||
| ZW-04-13-T-S-200-875 | Samtec Inc | CONN STACK BRD, 2.54MM, 4POS, HDR; RoHS : Compliant |
| 292 | ||
| TW-15-05-S-S-200-150 | Samtec Inc | CONN STACK BRD, 2MM, 15POS, HDR; RoHS : Compliant |
| 200 | ||
| ZW-16-07-T-S-200-200 | Samtec Inc | CONN STACK BRD, 2.54MM, 16POS, HDR; RoHS : Compliant |
| 161 | ||
| S201-C6 | ABB Low Voltage Products and Systems | CIRCUIT BREAKER, THERMAL MAG, 1 POLE; (Alternate Part Number: 4016779464000 RoHS : Compliant |
| 111 | ||
| S201MC4 | ABB Low Voltage Products and Systems | MCB, 1 POLE, 4A, 10KA, C CURVE; (Alternate Part Number: 4016779549950 RoHS : Compliant |
| 16 | ||
| VEL-PS20012 | Velcro Industries BV | TAPE, POLYAMIDE/PET/PP, 50MM X 5M, BLACK; RoHS : Not Compliant |
| 10 | ||
| S202-C63 | ABB Low Voltage Products and Systems | CIRCUIT BREAKER, THERMAL MAG, 2 POLE; (Alternate Part Number: 4016779551052 RoHS : Compliant |
| 7 | ||
| XT49S 20M XT49S-20 B04 E2 | Vishay Intertechnologies | CRYSTAL, 20MHZ; RoHS : Compliant |
| 4 | ||
 NXP Semiconductors | LS2048AXN711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, Quad-core, 2.1GHz, -40 to 105C, Security disabled, AIOP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | |
| LS2044AXN711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, Quad-core, 2.1GHz, -40 to 105C, Security disabled, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| LS2084AXN711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, 8-core, 2.1GHz, -40 to 105C, Security disabled, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| LS2084AXE711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, 8-core, 2.1GHz, -40 to 105C, Security enabled, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| LS2044AXE711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, Quad-core, 2.1GHz, -40 to 105C, Security enabled, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| LS2088AXN711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, 8-core, 2.1GHz, -40 to 105C, Security disabled, AIOP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| LS2088ARDB-PC | NXP Semiconductors | Layerscape LS2088A Reference Design Board, RoHS : Compliant |
| 13 | ||
| LS2048AXE711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, Quad-core, 2.1GHz, -40 to 105C, Security enabled, AIOP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| LS2088AXE711B | NXP Semiconductors | Layerscape 64-bit Arm Cortex-A72, 8-core, 2.1GHz, -40 to 105C, Security enabled, AIOP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
 RS | SS-2028-16 (SS202816) | Isostatic Industries Inc | SLEEVE BEARING, SS-2028-16 .628 X .878 X 1IN, POWDERED METAL BRONZE |
| 128 | |
| G3S-201PL-PD DC24 (G3S201PLPDDC24) | OMRON Industrial Automation | SOLID STATE RELAY, 24 VDC, SPST-NO, 1.2A/240VAC, GENERAL PURPOSE, G3S SERIES |
| 19 | ||
| FHS202-15MM (PER.FHS202) | PEER Bearing Company | AGRICULTURE BEARINGS, ADVANCED SEALING, LONG-LASTING PERFORMANCE |
| 8 | ||
| LS200-15 (LS20015) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,15V,13.4A,86-264V IN, ENCLOSED, DIN RAIL, PFC,201W, LS SERIES |
| 6 | ||
| S20 | Klein Tools Inc | 5/8" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 4 | ||
| E3C-S20W (E3CS20W) | OMRON Industrial Automation | SENSOR, PHOTO SEPARATE AMP, THROUGH BEAM, BRACKET MOUNT, 200MM, E3C SERIES |
| 4 | ||
| LS200-36 (LS20036) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,36V,5.6A,86-264V IN, ENCLOSED, PANEL MOUNT, PFC,202W, LS SERIES |
| 3 | ||
| E3S-LS20XB4 (E3SLS20XB4) | OMRON Industrial Automation | PHOTOELEC SENSOR LIMITED REFLECTIVE TYPE, E3S-LS SERIES |
| 3 | ||
| E3S-LS20XE4 (E3SLS20XE4) | OMRON Industrial Automation | PHOTOELECTRIC SENSOR, REFLECTIVE, DIFFUSE, 0.25M RANGE, 24VDC, E3S-LS SERIES |
| 3 | ||
| AS2002FS2-03 | SMC Corporation of America | FLOW CONTROL, AIR, INLINE, 90 DEGREE INDICATOR, FOR 5/32" TUBE |
| 2 | ||
| FQ2-S20100N (FQ2S20100N) | OMRON Industrial Automation | STANDARD, NPN,300X191 FOV |
| 2 | ||
| E4PA-LS200-M1-N (E4PALS200M1N) | OMRON Industrial Automation | ULTRASONIC SWITCH |
| 2 | ||
| AS2052FS2-07 | SMC Corporation of America | SPEED CONTROLLER, 53.4 L X 21.5 W X 49 H MM, 1/4 IN. PORT SIZE, AS SERIES |
| 1 | ||
| SS-2028-14 (SS202814) | Isostatic Industries Inc | SLEEVE BEARING, SS-2028-14 .628 X .878 X 7/8IN, POWDERED METAL BRONZE |
| 1 | ||
| G9SX-NS202-RT DC24 (G9SXNS202RTDC24) | OMRON Industrial Automation | NON-CONTACT DOOR SWITCH CONTROLLER, 24 VDC, 2 SAFETY OUT, 2 AUX OUT, G9SX SERIES |
| 1 | ||
 Microchip Technology Inc | DSPIC33EP32GS202T-E/M6 | Microchip Technology Inc | 16-bit DSC 32KB Flash, 2KB RAM, 28 Pin with SMPS peripherals, UQFN, Projected EOL: 2040-10-28 RoHS : Compliant |
| 19,800 | |
| MSARS20E060G | Microchip Technology Inc | UFR,FRR _ C-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 3,123 | ||
| IS2020S-203 | Microchip Technology Inc | Bluetooth v4.1 Stereo Headset and DSP Products, VQFN, Projected EOL: 2041-06-08 RoHS : Compliant |
| 3,000 | ||
| DSPIC33EP16GS202-E/SO | Microchip Technology Inc | 16-bit DSC 16KB Flash, 2KB RAM, 28 Pin with SMPS peripherals, SOIC, Projected EOL: 2041-09-12 RoHS : Compliant |
| 2,268 | ||
| APT60S20BG | Microchip Technology Inc | SCHOTTKY Discrete Rectifier 200 V 60 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 1,793 | ||
DSPIC33FJ06GS202-I/MM | Microchip Technology Inc | 16 BIT MCU/DSP 28LD 40MIPS 6 KB FLASH 1 KB RAM SMPS, QFN-S, Projected EOL: 2036-03-10 RoHS : Compliant |
| 1,281 | ||
DSPIC33FJ06GS202-E/SO | Microchip Technology Inc | 16 BIT MCU/DSP 28LD 40MIPS 6 KB FLASH 1 KB RAM SMPS, SOIC, Projected EOL: 2036-03-10 RoHS : Compliant |
| 1,269 | ||
AT89S2051-24SU | Microchip Technology Inc | 8051 MCU, 2K FLASH, 24MHZ SOIC IND GREEN, SOIC, Projected EOL: 2040-11-14 RoHS : Compliant |
| 1,161 | ||
| DSPIC33EP16GS202-I/MM | Microchip Technology Inc | 16-bit DSC 16KB Flash, 2KB RAM, 28 Pin with SMPS peripherals, QFN-S, Projected EOL: 2041-09-11 RoHS : Compliant |
| 996 | ||
| DSPIC33EP32GS202-I/SS | Microchip Technology Inc | 16-bit DSC 32KB Flash, 2KB RAM, 28 Pin with SMPS peripherals, SSOP, Projected EOL: 2041-09-12 RoHS : Compliant |
| 786 | ||
| DSPIC33AK512MPS208-I/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, Security, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 595 | ||
| APT2X101S20J | Microchip Technology Inc | SCHOTTKY Discrete Rectifier 200 V 100 A Dual Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 200 | ||
| DSPIC33AK256MPS206-I/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, Security, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 160 | ||
| DSPIC33EP16GS202-E/MM | Microchip Technology Inc | 16-bit DSC 16KB Flash, 2KB RAM, 28 Pin with SMPS peripherals, QFN-S, Projected EOL: 2041-09-11 RoHS : Compliant |
| 56 | ||
| AT68166HT-YS20-E | Microchip Technology Inc | 16Mbit 512Kx32 SRAM MCM,5V Tol,20ns Prot, CQFP, Projected EOL: 2041-03-26 - Contact for Pricing RoHS : Unknown | 12 | |||
 Rochester Electronics | LS2044ASN7QQB | NXP Semiconductors | IC MPU ARM® Cortex®-A72 64Bit 4 Core 1.6GHz 1292-BGA Tray RoHS : Compliant |
| 21 | |
SPP80N06S2-07 | Infineon Technologies AG | Power Field-Effect Transistor, 80A I(D), 55V, 0.0066ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant |
| 75 | ||
TPS2021DR | Texas Instruments | Power Distribution Switch General Purpose N-Channel 1 OUT High Side 8-SOIC T/R RoHS : Compliant |
| 112 | ||
TPS2023P | Texas Instruments | Power Distribution Switch General Purpose N-Channel 1 OUT High Side 8-DIP Tube RoHS : Compliant |
| 8,100 | ||
TPS2047BDR | Texas Instruments | Fixed, 3 Channel, PDSO16 RoHS : Compliant |
| 15,000 | ||
| TPS2058DR | Texas Instruments | Power Supply Support Circuit, Fixed, 4 Channel, PDSO16 RoHS : Compliant |
| 300 | ||
TPS2066TDGNRQ1 | Texas Instruments | Power Distribution Switch General Purpose N-Channel 2 OUT High Side 8-SOP T/R RoHS : Compliant |
| 37,212 | ||
TRS208CDB | Texas Instruments | Line Transceiver, 4 Func, 4 Driver, 4 Rcvr, PDSO24 RoHS : Compliant |
| 5,915 | ||
| CY7C1362S-200AXC | Cypress Semiconductor | Cache SRAM RoHS : Compliant |
| 469 | ||
| DS1005S-200+ | Maxim Integrated Products | Silicon Delay Line, 1-Func, 5-Tap, True Output, CMOS, PDSO16 RoHS : Compliant |
| 1,197 | ||
| MAX6389XS20D1 | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +2V, BICMOS, PDSO4 RoHS : Not Compliant |
| 665 | ||
| 1S2075KTA-P-E | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Compliant |
| 4,666 | ||
| STPS20120CT | STMicroelectronics | Rectifier Array Schottky 120V 10A TO-220-3 Tube RoHS : Compliant |
| 64,100 | ||
| STPS20H100CFP | STMicroelectronics | Rectifier Array Schottky 100V 10A TO-220-3 Tube RoHS : Compliant |
| 18,000 | ||
| STPS20L15D | STMicroelectronics | Rectifier Single Schottky 15V 20A TO-220-2 Tube RoHS : Compliant |
| 3,000 | ||
 Sager | ES2000-NO.1-C1-0-38MM | TE Connectivity | Heat Shrink Tubing & Sleeves ES2000-NO.1-C1-0-38MM RoHS : Compliant |
| 17,600 | |
| HCSS-20-S-20.00-01-ST4 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCSS-20-S-20.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDMS-20-S-20.20-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSS-20-D-24.00-T-G-S20 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSS-20-S-20.00 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMSS-20-22-S-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| IDSS-20-S-20.00-T | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSS-20-S-20.00-ST8 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| MS200/MS200 | Eaton Bussmann | Circuit Breaker Accessories TWIN 200A PMP RPLCMENT SWITCHE-ACB | 0 | |||
| IDMS-20-S-20.00 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Male Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HCSS-20-S-20.00-01 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSS-20-S-20.20-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| ES2000-NO.2-A1-0-STK | TE Connectivity | TE Connectivity RoHS : Compliant | 0 | |||
| ES2000-NO.3-B8-0-120MM | TE Connectivity | TE Connectivity RoHS : Compliant | 0 | |||
 TME | RB218NS200TL | ROHM Semiconductor | Diode: Schottky rectifying; TO263S; SMD; 200V; 20A RoHS : Compliant |
| 970 | |
| STPS20H100CFP | STMicroelectronics | Diode: Schottky rectifying; THT; 100V; 10Ax2; TO220FP; Ufmax: 0.64V RoHS : Compliant |
| 754 | ||
| STPS20120CT | STMicroelectronics | Diode: Schottky rectifying; THT; 150V; 10Ax2; TO220AB; Ufmax: 1V RoHS : Compliant |
| 680 | ||
| QT49S-20.000MEEJ-T | QST Corporation | Crystal; 20MHz; SMD; 12.7x4.8x3.8mm; 18pF; Freq.stability: ±10ppm |
| 127 | ||
| S20LC40UV-5100 | Shindengen Electronic Manufacturing Co Ltd | Diode: rectifying; THT; 400V; 20A; Ifsm: 200A; MTO3PV (TO247AD) |
| 29 | ||
| KBILS20-3020 | KISTENBERG | Container: cuvette; red; long; 198x118x84mm; 5pcs; KBILS20; BINEER |
| 11 | ||
| LC1D096BDS207 | Schneider Electric | Contactor: 3-pole; NO x3; Auxiliary contacts: NC + NO; 24VDC; 9A |
| 0 | ||
| LC1D126FLS207 | Schneider Electric | Contactor: 3-pole; NO x3; Auxiliary contacts: NC + NO; 110VDC; 12A |
| 0 | ||
| LC1D1286BDS207 | Schneider Electric | Contactor: 4-pole; NC x2 + NO x2; Auxiliary contacts: NC + NO |
| 0 | ||
| LC1D326BDS207 | Schneider Electric | Contactor: 3-pole; NO x3; Auxiliary contacts: NC + NO; 24VDC; 32A |
| 0 | ||
| STPS20L15D | STMicroelectronics | Diode: Schottky rectifying; THT; 15V; 20A; TO220AC; Ufmax: 0.28V RoHS : Compliant |
| 0 | ||
| TAH529S-20-XL | Bahco | Hammer; fitter type; for working at height,with protection |
| 0 | ||
| TS20310B0000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; TS; 8A; 300V |
| 0 | ||
| TS20715A0000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; TS; 15A; 300V |
| 0 | ||
| 6STD15SAZ99S20X | Amphenol CONEC | Connector: D-Sub |
| 0 | ||
 Ameya Holding Limited | TPS2066TDGNRQ1 | Texas Instruments | IC PWR-DIST SW DL CURR-LMT 8MSOP RoHS : Compliant | 166,099 | ||
TPS2062CDR | Texas Instruments | IC PWR DIST SW CURR-LMT DL 8SOIC RoHS : Compliant | 109,270 | |||
| STPS20H100CFP | STMicroelectronics | STPS20H Series Dual Center Tap 10 A 100 V Schottky Rectifier -TO-220FPAB RoHS : Compliant | 14,480 | |||
| NCS20061SQ3T2G | onsemi | RoHS : Compliant | 12,000 | |||
STM8S207S6T6CTR | STMicroelectronics | IC MCU 8BIT 32KB FLASH 44LQFP RoHS : Compliant | 10,080 | |||
| STPS20M100SG-TR | STMicroelectronics | STPS20M100S Series 100 V 20 A Surface Mount Power Schottky Rectifier - D2PAK RoHS : Compliant | 10,080 | |||
STM8S207K8T6CTR | STMicroelectronics | MCU 8BIT 64KB FLASH 32-LQFP RoHS : Compliant | 9,680 | |||
| BD9S200MUF-CE2 | ROHM Semiconductor | RoHS : Compliant |
| 5,950 | ||
| STPS20150CG-TR | STMicroelectronics | STPS20150CG Series 20 A Forward High Voltage Power Schottky Rectifier - D2PAK RoHS : Compliant | 3,080 | |||
| STM8S207S8T6CTR | STMicroelectronics | STM8 Series 8-bit 64 KB Flash 4 KB RAM 24 MHz Microcontroller - LQFP-44 RoHS : Compliant | 1,080 | |||
| WDS200T1R0C | Western Digital Corp | 200 | ||||
| SCS208AJHRTLL | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
SCS206AGHRC | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| SCS206AGC | ROHM Semiconductor | RoHS : Compliant |
| 27 | ||
| RB218NS200TL | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
 ComSIT USA | DS2003TMXNOPB | AVAILABLE EU | 1,697 | |||
| PTVS20VS1UR | NXP Semiconductors | AVAILABLE EU RoHS : Compliant | 912 | |||
TPS2042BD | Texas Instruments | AVAILABLE EU RoHS : Compliant | 251 | |||
STM8S207R8T6C | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 23 | |||
| LWS201 | Essentra Components | AVAILABLE EU | 176 | |||
JS202011CQN | C&K Switches | AVAILABLE EU RoHS : Compliant | 19 | |||
STM8S208C8T6 | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 73 | |||
| ECS2016MV500CNTR | ECS INC INTERNATIONAL | AVAILABLE EU | 3 | |||
JS202011JCQN | C&K Switches | AVAILABLE EU RoHS : Compliant | 867 | |||
S202031MS02Q | C&K Switches | AVAILABLE EU RoHS : Compliant | 329 | |||
TPS2041BDBVR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,231 | |||
| TPS2041BDBVR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 473 | |||
| TPS2042BDR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,998 | |||
| BSS209PWH6327XTSA1 | Infineon Technologies AG | AVAILABLE EU RoHS : Compliant | 845 | |||
TPS2044AD | Texas Instruments | AVAILABLE EU RoHS : Compliant | 101 | |||
ComSIT USA | BS2010H75055E | E-tec Interconnect Ltd | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking RoHS : Not Compliant | 46,800 | ||
| PTVS20VS1UR | NXP Semiconductors | 400 W TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 400W, 20V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 3,000 | |||
| 74HC08DS200 | NXP Semiconductors | QUAD 2-INPUT AND GATE AND Gate, HC/UH Series, 4-Func, 2-Input, CMOS, PDSO14 RoHS : Compliant | 1,645 | |||
IRS2003PBF | International Rectifier | HALF-BRIDGE DRIVER Half Bridge Based Peripheral Driver, CMOS, PDIP8 RoHS : Compliant | 1,020 | |||
| CSTCS2000MX040TC | Murata Manufacturing Co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
| C45070AS203K006 | CTC Coils Ltd | Electronic Component RoHS : Not Compliant | 1,000 | |||
| STPS20H100CFP | STMicroelectronics | 20 AMP POWER SCHOTTKY RECTIFIER Rectifier Diode, Schottky, 1 Phase, 2 Element, 10A, 100V V(RRM), Silicon, TO-220AB RoHS : Compliant | 780 | |||
| VS20ETF02FPPBF | Vishay Intertechnologies | FAST SOFT RECOVERY RECTIFIER DIODE, 20 A Rectifier Diode, 1 Phase, 1 Element, 20A, 200V V(RRM), Silicon, TO-220AC RoHS : Compliant | 150 | |||
IRS2011SPBF | International Rectifier | HIGH AND LOW SIDE DRIVER Buffer/Inverter Based Peripheral Driver, CMOS, PDSO8 RoHS : Compliant | 119 | |||
| XC3S200AN4FTG256C | AMD Xilinx | SPARTAN-3AN FPGA Field Programmable Gate Array, 448 CLBs, 200000 Gates, 667MHz, 4032-Cell, CMOS, PBGA256 RoHS : Compliant | 46 | |||
TPS2030D | Texas Instruments | POWER-DISTRIBUTION SWITCH Buffer/Inverter Based Peripheral Driver, 1 Driver, 0.3A, MOS, PDSO8 RoHS : Not Compliant | 37 | |||
| XCS20XL4VQG100C | AMD Xilinx | SPARTAN-XL FAMILY FIELD PROGRAMMABLE GATE ARRAY Field Programmable Gate Array, 400 CLBs, 7000 Gates, 217MHz, 950-Cell, CMOS, PQFP100 RoHS : Compliant | 35 | |||
TPS2044BD | Texas Instruments | CURRENT-LIMITED, POWER-DISTRIBUTION SWITCH Power Supply Support Circuit, Fixed, 4 Channel, PDSO16 RoHS : Not Compliant | 22 | |||
| XC3S200A4VQG100C | AMD Xilinx | SPARTAN-3A FPGA Field Programmable Gate Array, 448 CLBs, 200000 Gates, 667MHz, 4032-Cell, CMOS, PQFP100 RoHS : Compliant | 10 | |||
| TPS2041BD | Texas Instruments | Fixed, 1 Channel, PDSO8 RoHS : Compliant | 9 | |||
 GLYN GmbH & Co. KG | 020149MA004S203ZL | Suyin Group | USB Series B, SMD Type full shielded, 180C | 2,045 | ||
XC3S200A-4FTG256I | AMD Xilinx | Spartan-3A FPGA 256FTBG -40/100øC RoHS : Compliant | 600 | |||
XC3S200A-4VQG100I | AMD Xilinx | Spartan-3A FPGA 100-VQFP -40/+100øC RoHS : Compliant | 250 | |||
| PSS20S92F6-AG | Mitsubishi Electric | Super Mini-DIPIPM, Ver.6, 600V, 20A, 6in1, 1.5kVi | 27 | |||
| 070431FB015S200ZU | Suyin Group | 15pol ultra thinDSUB h.density 7731S-1 5G2T RoHS : Compliant | 10 | |||
| GLYN-FI-S20S-DF13-30S-0200RK | ES+S | Seite 1: FI-S20S Seite 2: DF13-30DS-1.25C LTG-LV | 5 | |||
 Interstate Connecting Components | 770-001S209W2 | Glenair Inc | SHRINK BOOTS SHAPE MEMORY |
| 0 | |
| 770-004S205W1 | Glenair Inc | SHRINK BOOTS SHAPE MEMORY RoHS : Compliant |
| 0 | ||
| 770-005S202 | Glenair Inc | RoHS : Compliant | 0 | |||
| ES2000-NO.1-C1-0-38MM | TE Connectivity | SHRNK TUB 4:1 ADH 5,72X38MM RoHS : Compliant |
| 0 | ||
| ES2000-NO.3-B8-0-38MM | TE Connectivity | 089543-000 9-1190656-6 ES2000-NO.3-B8-0-38MM RoHS : Compliant |
| 0 | ||
| ES2000-NO.4-B7-0-27MM | TE Connectivity | 6-1190948-0,130599P002 RoHS : Compliant |
| 0 | ||
| CBD7W2M55S2000 | Amphenol Positronic |
| 0 | |||
| CBD7W2S20000/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBM17W2S200T20/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBM24W7S200T20 | Amphenol Positronic | 0 | ||||
| CBM24W7S20Z00 | Amphenol Positronic | 0 | ||||
| CBM5W1S20000/AA | Amphenol Positronic | CBM SERIES DSUB 5POS SKT RoHS : Compliant |
| 0 | ||
| CBM7W2S200T2S/AA | Amphenol Positronic | 0 | ||||
| TS20310B0000G | Amphenol Anytek | TS -3.81 -20P BLACK - ZINC | 0 | |||
| TS20715A0000G | Amphenol Anytek | TS 5.0 20P GREEN - HOOK ON EN | 0 | |||
 NexGen Digital | S2AP500U101M1S2001W | Johanson Dielectrics Inc | 141,000 | |||
| CSACS20.00MX53Q-TC | Murata Manufacturing Co Ltd | 29,000 | ||||
| MKS2/0.01/63/5 | Wima | 5,292 | ||||
| ZHCS2000TA | Zetex / Diodes Inc | RoHS : Compliant | 1,067 | |||
| MBRS2040LT3G | onsemi | RoHS : Compliant | 1,003 | |||
JS203011JCQN | C&K Switches | RoHS : Compliant | 800 | |||
| ECS-184-S-20A-TR | ECS International Inc | RoHS : Compliant | 524 | |||
S2025N | Littelfuse Inc | RoHS : Compliant | 500 | |||
| ACASA2002S2002P1AT | Vishay Huntington | 372 | ||||
| ACASA1001S2001P100 | Vishay Huntington | 367 | ||||
| OR2C15A3S208 | Lattice Semiconductor Corporation | 32 | ||||
TPS2062D | Texas Instruments | RoHS : Compliant | 20 | |||
| LULU-SS202H5L05 | OPSTOSPAN | 10 | ||||
TPS2054BDR | Texas Instruments | RoHS : Compliant | 8 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
 PEI Genesis | CBM5W1S20000/AA | Amphenol Positronic | RoHS : Compliant |
| 0 | |
| S2029-12-34DN | SOURIAU-SUNBANK |
| 0 | |||
| S2029-18-12N | SOURIAU-SUNBANK |
| 0 | |||
| S2071CR3420-2.5S-12F | SOURIAU-SUNBANK |
| 0 | |||
| S4173C2804S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173C3106S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173C3410S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173F0607S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173F0902S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173F1204S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173F2502S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4173FM6905S2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4552S2050-4-3 | SOURIAU-SUNBANK |
| 0 | |||
| SE10A1006FS2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE10C1806ES2.0-4 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | S200-3-W2-22-9 | TE Connectivity | Connectors RoHS : Compliant |
| 491 | |
| TW-05-02-L-S-200-070 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 422 | ||
| TW-05-02-T-S-200-085 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 422 | ||
| TW-06-11-G-S-200-100 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 395 | ||
| 52601-S20-8TLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 264 | ||
| ZW-04-13-T-S-200-875 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 193 | ||
| TW-15-05-S-S-200-150 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 132 | ||
| ZW-16-10-G-S-200-340 | Samtec Inc | Cable Assembly, Wire-to-Board, ZIF RoHS : Compliant |
| 119 | ||
| ZW-16-07-T-S-200-200 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 106 | ||
| YDTS20W15-19SNV001 | TE Connectivity | DTS20 WALL RCPT SZ15-19 SKT CAD RoHS : Not Compliant |
| 32 | ||
| 32S207-302L5 | Rosenberger | right angle plug RoHS : Compliant |
| 26 | ||
| 301A034-25-CS-2065-0 | TE Connectivity | Connectors |
| 15 | ||
| M85049/109S20KZ07-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS |
| 14 | ||
| 327CS203NF2422 | Glenair Inc | ACCESSORIES - EXTENDER ADAPTER |
| 4 | ||
| YDTS20F15-97PNV001 | TE Connectivity | RECP ASSY RoHS : Compliant |
| 4 | ||
 PUI | ANS-20A | 6,423 | ||||
| TMS-200MA | 1,725 | |||||
| CBW57-PS-20A-5X | 1,630 | |||||
| CBW58-ES-20A-5C | 1,528 | |||||
| CBW57-HS-20A-5X | 983 | |||||
| CBW57-HS-20A-C | 845 | |||||
| CBW57-ES-20A-5H | 777 | |||||
| MRCBP4-PS-20A | 590 | |||||
| CBW57-ES-20A-P | 500 | |||||
| CBW57-PS-20A-WP | 310 | |||||
| CBW58-VS-20A-1B | 56 | |||||
| ANS-20A-VP | 30 | |||||
| ANS-20A-BX | 20 | |||||
| FMX-MS-20A-BP | 12 | |||||
| MRCBP4-PS-20A-BP | 12 | |||||
 Chip 1 Exchange | WLS2010R2500FEA | Vishay Intertechnologies | INSTOCK | 65,920 | ||
| PTVS20VS1UR | Nexperia | INSTOCK RoHS : Compliant | 24,000 | |||
| S20K300S5M4.8 | TDK Electronics | INSTOCK | 5,750 | |||
| 979-RF1090.0M-S20-R01 | INSTOCK | 5,114 | ||||
| TPS2020DR | INSTOCK | 4,507 | ||||
| CS20-25MOT1-TUB | IXYS Corporation | INSTOCK RoHS : Compliant | 3,900 | |||
| AD41ABS201 | Pop Rivets | INSTOCK | 1,038 | |||
| STPS20H100CFP | STMicroelectronics | INSTOCK RoHS : Compliant | 400 | |||
| 4000-256SS20 | INSTOCK | 236 | ||||
| JS-20SB10307D10-A | Central Semiconductor Corp | INSTOCK | 214 | |||
| STPS20H100CFP | INSTOCK | 129 | ||||
| ACMS201209A181 | INSTOCK | 59 | ||||
| KBS-20DB-6P-2 | INSTOCK | 55 | ||||
| XC2S200-6FG256C | INSTOCK | 9 | ||||
| RL42S202G | INSTOCK | 3 | ||||
 Avnet Abacus | BMI-S-202-F | Qnity Laird | Shield EMI Surface Mount 165 mm x 165 mm x 36 mm - Tape and Reel (Alt: BMI-S-202-F) RoHS : Compliant | 320,600 | ||
| BMI-S-201-F | Qnity Laird | Shield EMI Surface Mount 1366 mm x 121 mm x 254 mm - Tape and Reel (Alt: BMI-S-201-F) RoHS : Compliant | 109,000 | |||
| BMI-S-209-F | Qnity Laird | EMI Shielding Gasket 2936 mm x 185 mm x 7 mm SMT 2 Piece Series CorrosionResistant Steel - Tape and Reel (Alt: BMI-S-209-F) RoHS : Compliant | 75,600 | |||
| BMI-S-203-C | Qnity Laird | Shield EMI Surface Mount 2621 mm x 2621 mm x 508 mm (Alt: BMI-S-203-C) RoHS : Compliant | 73,200 | |||
| NRS2012T2R2MGJ | TAIYO YUDEN | (Alt: LMNRS2012T2R2MGJ) RoHS : Compliant | 50,000 | |||
| ECS-200-12-33Q-JES-TR | ECS International Inc | Crystal 20 MHz SMD 32mm x 25mm 50 ppm 12 pF 20 ppm ECX33Q Series - Tape and Reel (Alt: ECS-200-12-33Q-JES-TR) RoHS : Compliant | 33,000 | |||
| VLS201610HBX-2R2M-1 | TDK Corporation | Power Inductor SMD 22 H 17 A Shielded 19 A VLSHBX1 Series (Alt: VLS201610HBX-2R2M-1) RoHS : Compliant | 16,000 | |||
| B72220S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 20 mm (Alt: B72220S0200K101) RoHS : Compliant | 12,250 | |||
| B66359S2000X | TDK Corporation | Yoke for ETD 291610 Ferrite Core Stainless Spring Steel (Alt: B66359S2000X000) RoHS : Compliant | 7,200 | |||
| SS20W1F | Amphenol Corporation | (Alt: SS20W1F) RoHS : Compliant | 3,000 | |||
| SS20M1F | Amphenol Corporation | Circular Connector Contact ecomate RM Socket Crimp 20 AWG 22 AWG (Alt: SS20M1F) RoHS : Compliant | 3,000 | |||
MRMS205A-001 | Murata Manufacturing Co Ltd | AMR Magnetic Sensor 05mT to 25mT 3V to 55V SOT233 (Alt: MRMS205A-001) RoHS : Compliant | 3,000 | |||
| MS20W23F | Amphenol Corporation | (Alt: MS20W23F) RoHS : Compliant | 1,000 | |||
| B72210S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 10 mm (Alt: B72210S0200K101) RoHS : Compliant | 500 | |||
| DMS-20PC-1-LM-B-C | Murata Manufacturing Co Ltd | AC Line Voltage Monitor LED 94mm 85VAC to 264VAC 3DIGIT Panel Mount (Alt: DMS-20PC-1-LM-B-C) RoHS : Compliant | 108 | |||
Avnet Asia | BAS20,215 | Nexperia | Diode Switching 200V 0.2A 3-Pin TO-236AB T/R (Alt: BAS20,215) RoHS : Compliant | 54,000 | ||
| NCS20071XV53T2G | onsemi | (Alt: NCS20071XV53T2G) RoHS : Compliant | 40,000 | |||
| NCS20071SN2T1G | onsemi | (Alt: NCS20071SN2T1G) RoHS : Compliant |
| 15,000 | ||
| ABS20M-T | Taiwan Semiconductor | 2A, 1000V, Standard Bridge Rectifier (Alt: ABS20M-T) RoHS : Compliant |
| 10,000 | ||
| NCS20061MUTAG | onsemi | (Alt: NCS20061MUTAG) RoHS : Compliant |
| 3,000 | ||
| NCS20231SQ3T2G | onsemi | (Alt: NCS20231SQ3T2G) RoHS : Compliant |
| 2,870 | ||
| 7111S2015X02LF | Amphenol Corporation | Memory Card Connector, SIM, Hinged, 6 Contacts, Copper Alloy, Gold Plated Contacts, S20 Series (Alt: 7111S2015X02LF) RoHS : Compliant |
| 2,000 | ||
| KDSG352008S-20WA | Kingstate Electronics Corporation | KGSKDSG352008S-20WA MICRO SPEAKER 8 OHM (Alt: KDSG352008S-20WA) RoHS : Compliant | 0 | |||
| SMP-MSLD-PCS20T | Amphenol Corporation | (Alt: SMP-MSLD-PCS20T) RoHS : Compliant | 0 | |||
| 979-RF1090.0M-S20-R01 | Abracon Corporation | ABR979-RF1090.0M-S20-R01 CRYSTAL, 1090M (Alt: 979-RF1090.0M-S20-R01) RoHS : Compliant | 0 | |||
| CCS-206840-01-MP | Samtec Inc | (Alt: CCS-206840-01-MP) RoHS : Compliant | 0 | |||
| BAS20-QR | Nexperia | Diode High Speed Switching 200V 200mA 3-Pin SOT-23 T/R (Alt: BAS20-QR) RoHS : Compliant | 0 | |||
| BMI-S-202-F | Qnity Laird | Shield, EMI, Surface Mount, 16.5 mm x 16.5 mm x 3.6 mm (Alt: BMI-S-202-F) RoHS : Compliant |
| 0 | ||
| PTVS20VP1UP-QX | Nexperia | (Alt: PTVS20VP1UP-QX) RoHS : Compliant | 0 | |||
| ECS-200-20-23A-EN-TR | ECS International Inc | Crystal, 20 MHz, SMD, 6mm x 3.5mm, 50 ppm, 20 pF, 30 ppm, ECX-64A Series (Alt: ECS-200-20-23A-EN-TR) RoHS : Compliant | 0 | |||
 Avnet Silica | STPS4S200B-TR | STMicroelectronics | Schottky Rectifier 200 V 4 A Single TO252 DPAK 2 Pins 870 mV (Alt: STPS4S200B-TR) RoHS : Compliant | 1,687,500 | ||
| STPS20H100CG-TR | STMicroelectronics | Schottky Rectifier 100 V 20 A Dual Common Cathode TO263 D2PAK 3 Pins 880 mV (Alt: STPS20H100CG-TR) RoHS : Compliant | 141,000 | |||
| IPS2050HTR | STMicroelectronics | Power Load Distribution Switch Dual High Side 1 Output 60 V 35 A 0025 ohm PowerSSOEP24 (Alt: IPS2050HTR) RoHS : Compliant | 108,000 | |||
| STPS20H100CT | STMicroelectronics | Schottky Rectifier 100 V 20 A Dual Common Cathode TO220AB 3 Pins 640 mV (Alt: STPS20H100CT) RoHS : Compliant | 53,150 | |||
| SS2060FL _R1 _00001 | PanJit Semiconductor | (Alt: SS2060FL_R1_00001) RoHS : Compliant | 45,000 | |||
STPS20L15G-TR | STMicroelectronics | Schottky Rectifier 15 V 20 A Single TO263 D2PAK 2 Pins (Alt: STPS20L15G-TR) RoHS : Compliant | 41,000 | |||
| STPS20M100SG-TR | STMicroelectronics | Schottky Rectifier 100 V 20 A Single TO263 D2PAK 3 Pins 850 mV (Alt: STPS20M100SG-TR) RoHS : Compliant | 19,000 | |||
| NCS20081SN3T1G | onsemi | (Alt: NCS20081SN3T1G) RoHS : Compliant | 6,000 | |||
| STPS20200CT | STMicroelectronics | Schottky Rectifier 200 V 20 A Dual Common Cathode TO220AB 3 Pins (Alt: STPS20200CT) RoHS : Compliant | 5,500 | |||
| STPS20100CT | STMicroelectronics | Diode Schottky 100V 10A 3Pin3Tab TO220AB Tube (Alt: STPS20100CT) RoHS : Compliant | 5,250 | |||
| IPS2050HQ | STMicroelectronics | Power Load Distribution Switch IC High Side 2 Channels 60 V 24 A 30 MilliOhms 48 Pins VFQFPNEP (Alt: IPS2050HQ) RoHS : Compliant | 5,000 | |||
| STPS20120CR | STMicroelectronics | Diode Schottky 120V 20A 3Pin3Tab I2PAK Tube (Alt: STPS20120CR) RoHS : Compliant | 4,000 | |||
| STPS20SM100ST | STMicroelectronics | Diode Schottky 100V 20A 3Pin3Tab TO220AB Tube (Alt: STPS20SM100ST) RoHS : Compliant | 4,000 | |||
| IPS2050HQ-32 | STMicroelectronics | Power Load Distribution Switch Dual Active High 1 Output 60 V 179 A 0025 ohm QFNEP48 (Alt: IPS2050HQ-32) RoHS : Compliant | 2,500 | |||
| IPS2050HTR-32 | STMicroelectronics | Power Load Distribution Switch Dual High Side 1 Output 60 V 8 A 0025 ohm PowerSSOEP24 (Alt: IPS2050HTR-32) RoHS : Compliant | 1,000 | |||
 Braemac Americas-Symmetry | AMMLPAAVJS-20.0000T | Abracon Corporation |
| 0 | ||
| AMMLPVALCS-20.0000T | Abracon Corporation |
| 0 | |||
| ENSP3-450P-S20-H0V | Nipron Co | 450W Nonstop power supply |
| 0 | ||
EC2625ETTS-2.048M TR | Abracon Corporation | Standard Clock Oscillator 2.048MHz SMD 5.0mm x 7.0mm 25ppm -40C to +85C RoHS : Unknown |
| 0 | ||
| AMMLPFLBVJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-20.0000T | Abracon Corporation |
| 0 | |||
| ABLS-20.000MHZ-20-R30-B4-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ENSP-300P-S20-16S | Nipron Co | 300W Nonstop power supply |
| 0 | ||
| ASWD-S2-0008-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPAAXJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDAXCS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABVRS-20.0000T | Abracon Corporation |
| 0 | |||
| AECW0801C03S-2000G | Abracon Corporation |
| 0 | |||
| AMMLPAAXCS-20.0000T | Abracon Corporation |
| 0 | |||
 DB Roberts | 2108-440-SS-20 | RAF Electronic Hardware |
| 17 | ||
| 2321-1032-SS-20 | RAF Electronic Hardware |
| 4 | |||
| M0312-SS-20 | RAF Electronic Hardware | Metric Captive Panel Screw Style 4 Passivation | 0 | |||
| 0849-SS-20 | RAF Electronic Hardware | 0 | ||||
| TS20A | Essentra Components | TEAR TAB CAP - STD THRDLDPE BL | 0 | |||
| 2054-256-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2055T-440-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2077-440-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2143-3005-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2195-632-SS-20 | RAF Electronic Hardware | 0 | ||||
| 4009-256-SS-20 | RAF Electronic Hardware | 0 | ||||
| 1640-440-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2103-632-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2112-832-SS-20 | RAF Electronic Hardware | 0 | ||||
| 2169-632-SS-20 | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | STPS20H100CT | STMicroelectronics | Schottky Rectifier 100 V 20 A Dual Common Cathode TO220AB 3 Pins 640 mV (Alt: STPS20H100CT) RoHS : Compliant | 16,800 | ||
| STM8S207K8T6CTR | STMicroelectronics | MCU 8bit STM8S STM8 CISC 64KB Flash 33V5V 32Pin LQFP TR (Alt: STM8S207K8T6CTR) RoHS : Compliant | 14,400 | |||
| VS-20ETS12-M3 | Vishay Intertechnologies | (Alt: VS-20ETS12-M3) RoHS : Compliant | 9,150 | |||
| CUHS20S40,H3F(T | Toshiba America Electronic Components | Dioden andere als Fotodioden und Leuchtdioden LED SCHOTTKY DIODE (Alt: CUHS20S40,H3F(T) RoHS : Compliant | 9,000 | |||
| VS-20ETF12S-M3 | Vishay Intertechnologies | New Input Diodes D2PAK (Alt: VS-20ETF12S-M3) RoHS : Compliant | 6,700 | |||
| VS-20TQ045S-M3 | Vishay Intertechnologies | (Alt: VS-20TQ045S-M3) RoHS : Compliant | 5,950 | |||
| STM8S208C6T6 | STMicroelectronics | MCU 8bit STM8S STM8 CISC 32KB Flash 33V5V 48Pin LQFP (Alt: STM8S208C6T6) RoHS : Compliant | 4,500 | |||
| STPS20150CT | STMicroelectronics | Diode Schottky 150V 10A 3Pin3Tab TO220AB Tube (Alt: STPS20150CT) RoHS : Compliant | 2,900 | |||
| STPS4S200B-TR | STMicroelectronics | Schottky Rectifier 200 V 4 A Single TO252 DPAK 2 Pins 870 mV (Alt: STPS4S200B-TR) RoHS : Compliant | 2,500 | |||
| STPS20100CT | STMicroelectronics | Diode Schottky 100V 10A 3Pin3Tab TO220AB Tube (Alt: STPS20100CT) RoHS : Compliant | 2,000 | |||
| STPS20M100SG-TR | STMicroelectronics | Schottky Rectifier 100 V 20 A Single TO263 D2PAK 3 Pins 850 mV (Alt: STPS20M100SG-TR) RoHS : Compliant | 2,000 | |||
| STM8S208C8T6 | STMicroelectronics | MCU 8bit STM8S STM8 CISC 64KB Flash 33V5V 48Pin LQFP Tray (Alt: STM8S208C8T6) RoHS : Compliant | 1,750 | |||
| STPS20200CT | STMicroelectronics | Schottky Rectifier 200 V 20 A Dual Common Cathode TO220AB 3 Pins (Alt: STPS20200CT) RoHS : Compliant | 1,350 | |||
| STPS20H100CFP | STMicroelectronics | Schottky Rectifier 100 V 10 A Dual Common Cathode TO220FPAB 3 Pins 770 mV (Alt: STPS20H100CFP) RoHS : Compliant | 800 | |||
| AS20-M42-010 | Broadcom Limited | AS20 SET HEIGHT JIG (Alt: AS20-M42-010) RoHS : Compliant | 10 | |||
 ECCO | EPS-2001/2INBL48INB | 3M |
| 1,290 | ||
| EPS-2003/4INBL48INB | 3M |
| 48 | |||
| MS3452LS20-4S | Aero-Electric Connector Inc | RoHS : Not Compliant | 38 | |||
 Flip Electronics | NCS20092DTBR2G | onsemi | Stock RoHS : Compliant | 57,500 | ||
| NCS20091SN3T1G | onsemi | Stock, Ship Today RoHS : Compliant | 35,756 | |||
| S29GL512S11DHSS20 | Cypress Semiconductor | Stock | 31,204 | |||
| NCS20032DTBR2G | onsemi | Stock, Ship Today RoHS : Compliant | 20,000 | |||
| S29GL256S90DHSS20 | Infineon Technologies AG | Stock, Ship Today | 5,200 | |||
| S29GL01GT10DHSS20 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 3,985 | |||
| MKS20FN256VLL12 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 3,630 | |||
| NCS20081SQ2T2G | onsemi | Stock, Ship Today RoHS : Compliant | 2,853 | |||
| MRF6S20010NR1 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 2,690 | |||
| BLS6G3135S-20,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 2,135 | |||
| LPC43S20FET180K | NXP Semiconductors | Stock RoHS : Compliant | 894 | |||
| NCS20072DR2G | onsemi | Stock, Ship Today RoHS : Compliant | 207 | |||
| LS2084ASE7V17B | NXP Semiconductors | Stock RoHS : Compliant | 99 | |||
| BLS7G3135LS-200U | Flip Electronics Manufacturing Services | Stock, Ship Today | 54 | |||
| CY7C1360S-200AXI | Infineon Technologies AG | Stock, Ship Today | 41 | |||
 Master Electronics | IDSS-20-S-02.00-S20 | Samtec Inc | RoHS : Compliant |
| 0 | |
| HCSS-20-S-20.00-01-ST4 | Samtec Inc | Cable Assembly Ribbon 0.508m 20 POS IDC RCP RoHS : Compliant |
| 0 | ||
| HCMS-20-S-20.83-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCSS-20-S-20.00-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSS-20-S-04.00-S20 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDMS-20-S-20.20-G | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| IDSS-20-D-24.00-T-G-S20 | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDSS-20-S-20.00 | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDSS-08-S-20.00-ST8-S20 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSS-20-22-S-20.00-S-K | Samtec Inc | Cable Assembly Discrete Wire 0.508m 20 POS Discrete Wire Housing RCP RoHS : Compliant |
| 0 | ||
| IDSS-20-S-20.00-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSS-20-S-20.00-T | Samtec Inc | SLIM BODY SINGLE-ROW IDC RoHS : Compliant |
| 0 | ||
| IDSS-20-S-20.00-ST8 | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| HCMS-20-S-20.00-02-ST4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSS-20-S-03.00-S20 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | S201-C6 | ABB Low Voltage Products and Systems | Circuit Breaker; Supplementary; C Curve; 1-Pole; 6A; 480Y/277 VAC; UL1077; DIN |
| 50 | |
| PWR263S-20-4R70F | Bourns Inc | Thick Film Resistors - SMD 4.7ohms 1% 20watts RoHS : Compliant |
| 50 | ||
| Q2-F-1/2-01-SS200FT | Qualtek Electronics Corporation | Heat Shrink Tubing & Sleeves 1/2 200FT SPOOL BLK RoHS : Compliant |
| 50 | ||
| HS200 2R2 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 200W 2.2 Ohms 5% |
| 50 | ||
| HS200 220R J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 200W 220 Ohms 5% |
| 41 | ||
| HS201DR-CC2425W3U | Crydom Inc | Heat Sinks 35A/240V DC Input ZC SSR Mounted Heatsink RoHS : Compliant |
| 28 | ||
| HS200 6R8 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 200W 6.8 Ohms 5% |
| 22 | ||
| AMT112S-2048-8000-S | CUI Inc | Encoders AMT10, RADIAL, CAP, SINGLE ENDED, 2048 PPR, A/B/X, 8 MM, STANDARD BASE RoHS : Compliant |
| 18 | ||
| S201MUC-K1 | ABB Low Voltage Products and Systems | Circuit Breaker; Miniature; 1 Pole; K Curve; 1A; 440 VAC |
| 8 | ||
| IIS204 | ifm efector inc | Inductive proximity sensor, M30 Flush, Sr15mm, DC PNP NO, M12 Conn |
| 5 | ||
| SI-GL42DS20-11 | Banner Engineering Corp | Interlock Switches SI-GL42 Series Safety Interlock Switch; Spring Lock/Solenoid Unlock; 24 V DC; Contact Configuration: Actuator: 2NC, Monitor: 1NC/1NO; Connector: None |
| 2 | ||
| LS2007.5 | TDK-Lambda Corporation | Power Supply, AC-DC, 85264VACACDC,115/230VAC,Output 7.5V 26.7A,201W |
| 1 | ||
| RKBS20S2F10R | CyberPower | CyberPower Rackbar Surge Suppressor RM 1U RKBS20S2F10R 20A 12-Outlet |
| 1 | ||
| S201MUC-C32 | ABB Low Voltage Products and Systems | Circuit Breaker S200 MINI S NEW GEN MCB S200MUC 1P C 32A AC/DC |
| 1 | ||
| LS20M42B11-U02 | ABB Low Voltage Products and Systems | LMT SW MIN 20MM MOUNT 14 STEEL RLLR |
| 0 | ||
 Pasternack Enterprises US | PE3W07377/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Female to SMA Male Right Angle Cable 200 cm Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA female to SMA male right angle cable 200 cm length using RG316-DS coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA male right angle cable 200 cm length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W07377/HS-200CM, can also be known as a SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W07377/HS-200CM is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07377/HS-200CM can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle cable 200 cm length using RG316-DS coax with heatshrink. |
| 554 | |
| PE3W00088/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C600, RF Cable Type: PE-C600, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. TNC Male to TNC Male Low Loss Cable 200 CM Length Using PE-C600 Coax., Radio frequency assembly TNC male to TNC male low loss cable 200 cm length using PE-C600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC male to TNC male low loss cable 200 cm length using PE-C600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W00088/HS-200CM, can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00088/HS-200CM is built with PE-C600 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 200 cm length using PE-C600 coax. |
| 13 | ||
| PE3W02100LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMP Female Right Angle to BNC Female Bulkhead Cable 200 CM Length Using RG178 Coax with HeatShrink, LF Solder., Radio frequency assembly SMP female right angle to BNC female bulkhead cable 200 cm length using RG178 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to BNC female bulkhead cable 200 cm length using RG178 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and BNC bulkhead cable connection on the other. Our right angle SMP to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to BNC cable is a female to female coax assembly, PE3W02100LF/HS-200CM, can also be known as a right angle SMP jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to BNC jack cable assembly PE3W02100LF/HS-200CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02100LF/HS-200CM can also be used in the other direction and will be BNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to BNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to BNC female bulkhead cable 200 cm length using RG178 coax with heatshrink, LF solder. |
| 7 | ||
| PE71S2007 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 50 MHz, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum Input Power: 1 Watts, Maximum Insertion Loss: 5 dB, Minimum Isolation: 20 dB. SPST PIN Diode Switch Operating From 50 MHz to 26.5 GHz Up to +30 dBm and SMA. PE71S2007 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 50 MHz and a maximum frequency of 26.5 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 150 ns and a maximum input power of 1 Watt (+30 dBm ). Insertion loss maximum of this SMA Reflective switch is 5 dB with an isolation minimum of 20 dB. Reflective PIN diode radio frequency switch PE71S2007 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 1 | ||
| PE3C3643/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to N Male Right Angle Cable 200 CM Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle cable 200 cm length using LMR-400-UF coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 200 cm length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C3643/HS-200CM, can also be known as a N type plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C3643/HS-200CM is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3643/HS-200CM can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 200 cm length using LMR-400-UF coax with heatshrink. |
| 0 | ||
| PE3W01867LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male Right Angle to Reverse Polarity TNC Male Cable 200 cm Length Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male right angle to reverse polarity TNC male cable 200 cm length using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to reverse polarity TNC male cable 200 cm length using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and reverse polarity TNC cable connection on the other. Our right angle type N to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to reverse polarity TNC cable is a male to male coax assembly, PE3W01867LF/HS-200CM, can also be known as a right angle N type plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC plug cable assembly PE3W01867LF/HS-200CM is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01867LF/HS-200CM can also be used in the other direction and will be reverse polarity TNC male to right angle type N male cable assembly if the opposite connectivity is required. N type right angle plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to reverse polarity TNC male cable 200 cm length using LMR-400-UF coax with heatshrink, LF solder. |
| 0 | ||
| PE3W10487LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. N Female Bulkhead to SSMB Plug Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly N female bulkhead to SSMB plug low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SSMB plug low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SSMB cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SSMB cable connection on the other. Our low loss type N to SSMB cable assemblies have a female gender on end 1 and plug on end 2. PE3W10487LF/HS-200CM can also be known as a low loss N type jack to SSMB male cable assembly and will be shipped same-day as it is purchased. Type N jack to SSMB male cable assembly PE3W10487LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SSMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N female bulkhead to SSMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10487LF/HS-200CM can also be used in the other direction and will be SSMB plug to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SSMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SSMB cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SSMB plug low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W14249/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMB Plug to BNC Male Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly SMB plug to BNC male low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to BNC male low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB cable connection on one end and a BNC cable connection on the other. Our low loss SMB to BNC cable assembly has a plug gender on end 1 and a male on end 2. PE3W14249/HS-200CM can also be known as a low loss SMB male to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14249/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMB plug to BNC male cable has a maximum VSWR of 1.4:1. SMB male to BNC plug cable assembly PE3W14249/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14249/HS-200CM can also be used in the other direction and will be a BNC male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06872LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to QN Male Right Angle Cable 200 cm Length Using RG223 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to QN male right angle cable 200 cm length using RG223 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to QN male right angle cable 200 cm length using RG223 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle QN cable connection on the other. Our N type to right angle QN cable assemblies have a male gender on end 1 and male on end 2. This type N to QN cable is a male to male coax assembly, PE3W06872LF/HS-200CM, can also be known as a type N plug to right angle QN plug cable assembly and will be shipped same-day as it is purchased. N type plug to QN plug cable assembly PE3W06872LF/HS-200CM is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to QN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06872LF/HS-200CM can also be used in the other direction and will be right angle QN male to N type male cable assembly if the opposite connectivity is required. N type plug to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to QN male right angle cable 200 cm length using RG223 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W07240/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W07240/HS-200CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W07240/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07240/HS-200CM can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE39324/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to BNC Female 4 Hole Flange Low Loss Cable 200 CM Length Using PE-C195 Coax., Radio frequency assembly SMA male to BNC female 4 hole flange low loss cable 200 cm length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC female 4 hole flange low loss cable 200 cm length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC 4 hole flange cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE39324/HS-200CM, can also be known as a low loss SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE39324/HS-200CM is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to BNC female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39324/HS-200CM can also be used in the other direction and will be BNC female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female 4 hole flange low loss cable 200 cm length using PE-C195 coax. |
| 0 | ||
| PE3W04376/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Water Blue FAKRA Jack to MCX Plug Cable 200 cm Length Using RG316 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to MCX plug cable 200 cm length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Water blue FAKRA jack to MCX plug cable 200 cm length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and MCX cable connection on the other. Our FAKRA to MCX cable assemblies have a jack gender on end 1 and plug on end 2. This FAKRA to MCX cable is a jack to plug coax assembly, PE3W04376/HS-200CM, can also be known as a FAKRA female to MCX male cable assembly and will be shipped same-day as it is purchased. FAKRA female to MCX male cable assembly PE3W04376/HS-200CM is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04376/HS-200CM can also be used in the other direction and will be MCX plug to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MCX cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to MCX plug cable 200 cm length using RG316 coax with heatshrink. |
| 0 | ||
| PE3W07252/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 200 cm Length Using RG174 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 200 cm length using RG174 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 200 cm length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3W07252/HS-200CM, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3W07252/HS-200CM is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07252/HS-200CM can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 200 cm length using RG174 coax with heatshrink. |
| 0 | ||
| PE3W15242/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Blue FAKRA Jack to SMA Male Right Angle Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly blue FAKRA jack to SMA male right angle low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The blue FAKRA jack to SMA male right angle low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a right angle SMA cable connection on the other. Our low loss FAKRA to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3W15242/HS-200CM can also be known as a low loss FAKRA female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15242/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to right angle SMA male cable has a maximum VSWR of 1.4:1. FAKRA female to SMA plug cable assembly PE3W15242/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15242/HS-200CM can also be used in the other direction and will be a right angle SMA male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9606/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. 1.0/2.3 Plug Right Angle to N Female Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly 1.0/2.3 plug right angle to N female low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 1.0/2.3 plug right angle to N female low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.0/2.3 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 1.0/2.3 cable connection on one end and a type N cable connection on the other. Our low loss right angle 1.0/2.3 to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3C9606/HS-200CM can also be known as a low loss right angle 1.0/2.3 male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9606/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. 1.0/2.3 male to type N jack cable assembly PE3C9606/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with right angle 1.0/2.3 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9606/HS-200CM can also be used in the other direction and will be a type N female to right angle 1.0/2.3 plug cable assembly if the opposite connectivity is required. Low loss 1.0/2.3 right angle male to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to type N cable assembly for quick shipment worldwide. Variations of 1.0/2.3 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 TE Connectivity | CRGS2010J120R | TE Connectivity | CRGS2010 5% 120R Resistance Value: 120 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 120 Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGS2010J120R | Internal Number: 2-2176251-6 | TE Connectivity RoHS : Compliant |
| 7,274 | |
| CRGS2010J47R | TE Connectivity | CRGS2010 5% 47R Resistance Value: 47 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 47 Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGS2010J47R | Internal Number: 2-2176251-1 | TE Connectivity RoHS : Compliant |
| 7,165 | ||
| CRGS2010J22R | TE Connectivity | CRGS2010 5% 22R Resistance Value: 22 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 22 Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGS2010J22R | Internal Number: 1-2176251-7 | TE Connectivity RoHS : Compliant |
| 5,418 | ||
| 2MM-RC-S20-BX | TE Connectivity | 20P,2MM,REC,HSG,SR,CRIMP,PLAIN,BOX Part Number: 2MM-RC-S20-BX | Internal Number: 2-2316102-0 | TE Connectivity RoHS : Compliant |
| 636 | ||
| FS2050-0000-3000-G | TE Connectivity | FS2050 3000G FORCE SENSOR Force Sensor Type: OEM Compression Load Cells Force Direction: Compression Full Scale Range: 30 Newton Operating Temperature Range: -40 – 85 °C Operating Temperature Range: -40 – 185 °F OEM Compression Load Cells | Low Compression Load Cell | Part Number: FS2050-0000-3000-G | Internal Number: FS2050-0000-3000-G | TE Connectivity RoHS : Compliant |
| 106 | ||
| FS2030-0000-3000-G | TE Connectivity | FS2030-0000-3000-G Force Sensor Type: OEM Compression Load Cells Force Direction: Compression Full Scale Range: 30 Newton Operating Temperature Range: -40 – 85 °C Operating Temperature Range: -40 – 185 °F OEM Compression Load Cells | Low Compression Load Cell | Part Number: FS2030-0000-3000-G | Internal Number: 10215323-00 | TE Connectivity RoHS : Compliant |
| 100 | ||
| FS2030-000X-3000-G | TE Connectivity | FS2030-000X-3000-G Force Sensor Type: OEM Compression Load Cells Force Direction: Compression Full Scale Range: 3 Newton Operating Temperature Range: -40 – 85 °C Operating Temperature Range: -40 – 185 °F OEM Compression Load Cells | Low Compression Load Cell | Part Number: FS2030-000X-3000-G | Internal Number: 20006003-00 | TE Connectivity RoHS : Compliant |
| 98 | ||
| FS2030-0000-5000-G | TE Connectivity | FS2030-0000-5000-G Force Sensor Type: OEM Compression Load Cells Force Direction: Compression Full Scale Range: 50 Newton Operating Temperature Range: -40 – 85 °C Operating Temperature Range: -40 – 185 °F OEM Compression Load Cells | Low Compression Load Cell | Part Number: FS2030-0000-5000-G | Internal Number: 20006003-03 | TE Connectivity RoHS : Compliant |
| 90 | ||
| MPS-203R | TE Connectivity | MPS203R PSHBTTN DPDT MMNTRY Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: Without Operating Function: On (On) Configuration (Pole-Throw): Double Pole - Double Throw Number of Actuators: Single General Purpose Push Button Switch Without On (On) Double Pole - Double Throw | Pushbutton Switch | Part Number: MPS-203R | Internal Number: 1977739-4 | TE Connectivity RoHS : Compliant |
| 85 | ||
| FN9266S-2-06 | TE Connectivity | FN9266S-2-06 Current Rating (Max): 2 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: FASTON Leakage Current (Max) (120VAC, 60Hz): 310 µA Fn9266 Power Entry Module With Emc Filter – General-Purpose Module With High Attenuation And Switch | 2 A Filtered 180 µA FASTON | Part Number: FN9266S-2-06 | Internal Number: 819976-SF | FN9266S-2-06 Current Rating (Max): 2 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: FASTON Leakage Current (Max) (120VAC, 60Hz): 310 µA Fn9266 Power Entry Module With Emc Filter – General-Purpose Module With High Attenuation And Switch | 2 A Filtered 180 µA FASTON | Part# FN9266S-2-06 RoHS : Compliant |
| 22 | ||
| ES-2011-T121 | TE Connectivity | Emergency Switch ES-2011-T121 Push Button Switch Product Type: Emergency Stop Switch Illuminated: With Operating Function: Maintained Number of Actuators: Single Actuator Profile: Extended Emergency Stop Switch With Maintained Single | Emergency Stop Switch & 1 Actuator & Flush & Threaded Bushing | Part Number: ES-2011-T121 | Internal Number: K1165287 | TE Connectivity RoHS : Compliant |
| 18 | ||
| CRGS2010J1R0 | TE Connectivity | CRGS2010 5% 1R0 Resistance Value: 1 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 1 Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGS2010J1R0 | Internal Number: 2176251-1 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Vyrian | SPB80N06S2-07 | Infineon Technologies AG | Power Field-Effect Transistor, 80A I(D), 55V, 0.0066ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB | 12,658 | ||
| RWR78S2002FRRSL | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 10W, 20000ohm, 447.2136V, 1% +/-Tol, 20ppm/Cel, Through Hole Mount RoHS : Not Compliant | 10,045 | |||
| STM8S207S8T6CTR | STMicroelectronics | Microcontroller, 8-Bit, FLASH, STM8 CPU, 24MHz, CMOS, PQFP44 RoHS : Compliant | 10,023 | |||
| TPS2042PE4 | Texas Instruments | Analog Circuit, PDIP8 RoHS : Compliant | 9,688 | |||
TPS2065DGNRG4 | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, PDSO8 RoHS : Compliant | 8,999 | |||
| TPS2058DR | Texas Instruments | Power Supply Support Circuit, Fixed, 4 Channel, PDSO16 RoHS : Compliant | 8,679 | |||
| TPS2033DG4 | Texas Instruments | Buffer/Inverter Based Peripheral Driver, 1 Driver, 2.2A, MOS, PDSO8 RoHS : Compliant | 8,128 | |||
| TPS2045BD | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, PDSO8 | 7,883 | |||
| STPS20M60CR | STMicroelectronics | Rectifier Diode, Schottky, 1 Phase, 2 Element, 10A, 60V V(RRM), Silicon RoHS : Compliant | 7,601 | |||
| TPS2010ADG4 | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, PDSO8 RoHS : Compliant | 7,510 | |||
TPS2031DRG4 | Texas Instruments | Buffer/Inverter Based Peripheral Driver, 1 Driver, 0.9A, MOS, PDSO8 RoHS : Compliant | 6,600 | |||
| SPP80N06S2-07 | Infineon Technologies AG | Power Field-Effect Transistor, 80A I(D), 55V, 0.0066ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB | 5,685 | |||
| KTS2000256 | Kingston Technology Company | 5,103 | ||||
| TPS2047ADG4 | Texas Instruments | Power Supply Support Circuit, PDSO16 RoHS : Compliant | 4,239 | |||
| SS200S3/30GBK | Kingston Technology Company | 2,351 | ||||
 Waytek, Inc. | DHURCS-2-01 | Essentra Components | Cable Clamp Snap Rivet 3.2mm Nylon 6/6 Natural |
| 1,000 | |
| CBW57-PS-20-5X | OptiFuse | 20A Panel Mount CB 57 Circuit Breaker M11 Bushing LIKE CARLING CMB & 46483 |
| 967 | ||
| TPS202020 | Thomas & Betts | Thomas & Betts Harnessflex TPS202020 hinged tee fitting is a conduit branch fitting with .625" left, center, and right openings for corrugated loom routing. Its hinged tee design supports clean three-way harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications. |
| 486 | ||
| FMS-20 | Eaton Electronics | The Eaton Bussmann Series FMS-20 is a 20 amp, 32V automotive fuse designed for compact, high-density circuit protection in modern electrical systems. Featuring a slotted micro female Maxi (FMS) design, it fits space-constrained fuse holders while maintaining reliable performance. Constructed from high-temperature PA6T nylon with tin-plated copper terminals, it offers a slow-blow response, 1,000A interrupt rating, and operates from -40C to +125C. |
| 185 | ||
| 171-S2-080-2 | MP | 80A Auto Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE I 46933 |
| 109 | ||
| 175-S2-080-2 | MP | 80A Push Trip Reset 3/8" Stud Surface Mount Circuit Breaker HI AMP 46983 |
| 73 | ||
| 174-S2-080-2 | MP | 80A Manual Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE III SERIES17 46923 |
| 71 | ||
| 174-S2-060-2 | MP | 60A Manual Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE III SERIES17 46921 |
| 70 | ||
| 175-S2-060-2 | MP | 60A Push Trip Reset 3/8" Stud Surface Mount Circuit Breaker HI AMP 46981 |
| 45 | ||
| FHMS200 | Littelfuse Inc | Sealed Fuseholder w/ Cover Mini 12 AWG GXL Wire 30A 32VDC 8"Tinned Dipped Wire Leads |
| 39 | ||
| 175-S2-050-2 | MP | 50A Push Trip Reset 3/8" Stud Surface Mount Circuit Breaker HI AMP 46980 |
| 24 | ||
| FHMS201 | Littelfuse Inc | Sealed Fuseholder w/ Cover Mini 14 AWG GXL Wire 30A 32VDC 8"Tinned Dipped Wire Leads RoHS : Compliant |
| 13 | ||
| S2002 | Eaton Electronics | Sure Power S2002 Multi Battery Isolator 200A 1 Input 2 Out |
| 8 | ||
| 171-S2-060-2 | MP | 60A Auto Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE I 46931 |
| 6 | ||
 Win Source Electronics | TPS2051CDBVR/TPS2051CDBVT | Texas Instruments |
| 85,660 | ||
| IRS2092 | International Rectifier | PROTECTED DIGITAL AUDIO AMPLIFIER |
| 36,176 | ||
| TPS2041BDBVRG4 | Texas Instruments | IC PWR SWITCH N-CHAN 1:1 SOT23-5 RoHS : Compliant |
| 28,150 | ||
| TPS2041BDBVR/TPS2041BDBVT | Texas Instruments |
| 28,070 | |||
TPS2051BDGNG4 | Texas Instruments | IC PWR DIST SWITCH SNGL 8-MSOP RoHS : Compliant |
| 27,490 | ||
| TPS2062DGNR | Texas Instruments | IC CURR-LIMIT PWR-DIST SW 8-MSOP RoHS : Compliant |
| 17,500 | ||
| IRS2011SPBF | Infineon Technologies AG | IC DRIVER HI/LOW SIDE 8-SOIC RoHS : Compliant |
| 12,300 | ||
| TPS2021DR | Texas Instruments | IC 0.9A PWR DIST SWITCH 8-SOIC RoHS : Compliant |
| 11,240 | ||
| TPS2044BD | Texas Instruments | IC SWITCH PWR DIST QUAD 16-SOIC RoHS : Compliant |
| 9,500 | ||
TPS2010ADR | Texas Instruments | IC 0.3A PWR DIST SWITCH 8-SOIC RoHS : Compliant |
| 9,010 | ||
| IRLMS2002 | Infineon Technologies AG | MOSFET N-CH 20V 6.5A MICRO6 RoHS : Not Compliant |
| 7,400 | ||
| TPS2031DRG4 | Texas Instruments | IC 900MA PWR DIST SWITCH 8-SOIC RoHS : Compliant |
| 2,500 | ||
TPS2020DR | Texas Instruments | IC .3A PWR DIST SWITCH 8-SOIC RoHS : Compliant |
| 1,500 | ||
| XC3S200-4VQG100I | AMD Xilinx | IC FPGA 63 I/O 100VQFP RoHS : Compliant |
| 344 | ||
XC2S200-5PQ208I | AMD Xilinx | IC FPGA 140 I/O 208QFP / FPGA Spartan®-II Family 200K Gates 5292 Cells 263MHz 0.18um Technology 2.5V 208-Pin PQFP RoHS : Compliant |
| 270 | ||
 Wuhan P&S | NCS20072DR2G | onsemi | Dual Op Amp,Rail-to-Rail Output,3MHz RoHS : Compliant |
| 202,500 | |
| VS-20MQ060HM3/5AT | Vishay Intertechnologies | Schottky Rectifier, 60V,2A RoHS : Compliant |
| 90,000 | ||
BAS20LT1G | onsemi | High Voltage Switching Diode RoHS : Compliant |
| 63,000 | ||
| BAS20-HE3_A-18 | Vishay Intertechnologies | Small Signal Switching Diodes, High Voltage RoHS : Compliant |
| 40,000 | ||
NCS2001SN1T1G | onsemi | 0.9V, Rail-to-Rail, Single Operational Amplifiers RoHS : Compliant |
| 33,000 | ||
| NCS20061SQ3T2G | onsemi | 3 MHz, 125 A Low Power Operational Amplifier RoHS : Compliant |
| 21,000 | ||
| STPS20LCD200CT | STMicroelectronics | 200V, 20A dual power Schottky rectifier RoHS : Compliant |
| 10,000 | ||
| NVNJWS200N031LTAG | onsemi | 30V,3.3A,N-Channel Power MOSFET, RoHS : Compliant |
| 6,000 | ||
| STPS20150CFP | STMicroelectronics | 150V,2x10A,Dual Schottky rectifier RoHS : Compliant |
| 6,000 | ||
| MBRS2040LT3G | onsemi | Surface Mount Schottky Barrier Power Rectifier RoHS : Compliant |
| 5,000 | ||
| VS-20ETS12S-M3 | Vishay Intertechnologies | 1200VRRM,20A,SMT Input Rectifier Diode RoHS : Compliant |
| 4,000 | ||
| STPS2045CTC | STMicroelectronics | 45V,2 x 15A,Power Schottky Rectifier |
| 4,000 | ||
| STPS20200CFP | STMicroelectronics | - RoHS : Compliant |
| 2,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British