1

Features

• 20 to 1000 MHz Frequency Range

• Surface Mount Device

• 50 ohm unbalanced to 25 ohm balanced

Applications

•

Push-Pull Amplifiers

• Antenna Drivers

• Amateur Radio

• Commercial

• Military

.

Description

The PE2BL1002 is part of a family of 100 watt surface mount baluns. It converts between a 50 ohm unbalanced signal (one

signal referenced to ground) and balance signals (two 50 Ohm signals referenced to each other, 25 Ohms referenced to

ground). These baluns have many useful applications. For example, when matching to low impedances (like transistors),

these baluns allows improved matching to applications like push-pull amplifiers with improved bandwidth, and losses while

providing second harmonic cancelation.

Electrical Specifications

Description

Minimum

Typical

Maximum

Units

Frequency Range

20

1,000

MHz

Unbalanced Impedance

50

Ohms

Balanced Impedance

25

Ohms

Insertion Loss

0.5

dB

VSWR

1.3:1

Nominal Phase Difference

180

Degrees

Phase Balance

±6

Degrees

Amplitude Balance

±0.45

dB

Input Power (CW)

100

Watts

.

Mechanical Specifications

Size

Length

1.15 in [29.21 mm]

Width

1.1 in [27.94 mm]

Height

0.45 in [11.43 mm]

.

Package Type

Surface Mount

.

Environmental Specifications

Temperature

Operating Range

-55 to 85 deg C

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: 50 Ohm to 25 Ohm Balun From 20 MHz to 1,000 MHz Up to 100 Watts Surface Mount(SMT)

PE2BL1002

PE2BL1002 REV 1.0

50 Ohm to 25 Ohm Balun From 20 MHz to 1,000 MHz

Up to 100 Watts Surface Mount(SMT)

Baluns Technical Data Sheet

PE2BL1002