© 2017 Kingbright. All Rights Reserved. Spec No: DSAJ4541 / 1203008819 Rev No: V.9B Date: 07/13/2017

Page 1 / 4

Part Number

Emitting Color

(Material)

Lens Type

Min.

Typ.

2θ1/2

APHBM2012QBDCGKC

Water Clear

40

120

°

20

50

80

DESCRIPTIONS

The Blue source color devices are made with InGaN

Light Emitting Diode

The Green source color devices are made with

AlGaInP on GaAs substrate Light Emitting Diode

Electrostatic discharge and power surge could

damage the LEDs

It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

All devices, equipments and machineries must be

electrically grounded

FEATURES

2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness

Low power consumption

Wide viewing angle

Ideal for backlight and indicator

Package: 2000 pcs / reel

Moisture sensitivity level: 3

RoHS compliant

APPLICATIONS

Backlight

Status indicator

Home and smart appliances

Wearable and portable devices

Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

APHBM2012QBDCGKC

2.0 x 1.25 mm SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.