SIP32441 datasheet(2/11 Pages) VISHAY

2 / 11 page

SiP32441

www.vishay.com

Vishay Siliconix

S15-1921-Rev. A, 17-Aug-15

Document Number: 65763

For technical questions, contact: powerictechsupport@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

•

x = Lot code

•

GE4 denotes halogen-free and RoHS compliant

Notes

a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout.

b. Derate 5.9 mW/°C above TA = 25 °C, see PCB layout.

c. TA = 25 °C, see PCB layout.

d. Tested on VIN with 2.2 μF CIN. VIN connected to micro-USB connector.

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation

of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum

rating/conditions for extended periods may affect device reliability.

ORDERING INFORMATION

Part Number

Package

Marking

Temperature Range

SiP32441DNP-T1-GE4

TDFN4 1.2 mm x 1.6 mm

-40 °C to +85 °C

ABSOLUTE MAXIMUM RATINGS

Parameter

Limit

Unit

Supply Input Voltage (VIN)

-2 to +6

Enable Input Voltage (VEN)

-2 to +6

Output Voltage (VOUT)

-0.3 to +6

Maximum Continuous Switch Current (Imax.) c

3.5

Maximum Repetitive Pulsed Current (1 ms, 10 % Duty Cycle) c

Maximum Non-Repetitive Pulsed Current (100 μs, EN = Active) c

Junction Temperature (TJ)

-40 to +150

°C

Thermal Resistance (qJA) a

170

°C/W

Power Dissipation (PD) a,b

735

ESD Rating

HBM

300

IEC41000-4-2 Air Discharge d

IEC41000-4-2 Contact Discharge d

RECOMMENDED OPERATING RANGE

Parameter

Limit

Unit

Input Voltage Range (VIN)

1.7 to 5.5

Operating Junction Temperature Range (TJ)

-40 to +125

°C

SIP32441 Datasheet(PDF) 2 Page - Vishay Siliconix

SIP32441 Datasheet(HTML) 2 Page - Vishay Siliconix

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL