Rev B

DCMSAU2 SERIES

2 Watt DC/DC Power Converters

10/23/2013

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •

Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 5 of 5

Output Ripple Reduction

A good quality low ESR capacitor placed as close as possible across the load will give the best ripple and noise performance.

To reduce output ripple, it is recommended to use 1.5µF capacitors at the output.

TEST SETUP

Thermal Considerations

Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module, and board

spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case

temperature must be kept below 90°C. The derating curves are determined from measurements obtained in a test setup.

COMPANY INFORMATION

Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development

engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008

certification is just one example of our commitment to producing a high quality, well-documented product for our customers.

Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely

with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide

ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your

future projects.

Contact Wall Industries for further information:

Phone:

(603)778-2300

Toll Free:

(888)597-9255

Fax:

(603)778-9797

E-mail:

sales@wallindustries.com

Web:

www.wallindustries.com

Address:

37 Industrial Drive

Exeter, NH 03833