| Electronic Components Datasheet Search |
|
P89V51RB2BBC Datasheet(PDF) 18 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
P89V51RB2BBC Datasheet(HTML) 18 Page - NXP Semiconductors |
|
18 / 77 page ![]() Philips Semiconductors P89V51RB2/RC2/RD2 8-bit microcontrollers with 80C51 core Product data Rev. 03 — 02 December 2004 18 of 77 9397 750 14341 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. When EXTRAM = 0, the expanded RAM is indirectly addressed using the MOVX instruction in combination with any of the registers R0, R1 of the selected bank or DPTR. Accessing the expanded RAM does not affect ports P0, P3.6 (WR), P3.7 (RD), or P2. With EXTRAM = 0, the expanded RAM can be accessed as in the following example. Expanded RAM Access (Indirect Addressing only): MOVX@DPTR, A DPTR contains 0A0H DPTR points to 0A0H and data in ‘A’ is written to address 0A0H of the expanded RAM rather than external memory. Access to external memory higher than 2FFH using the MOVX instruction will access external memory (0300H to FFFFH) and will perform in the same way as the standard 8051, with P0 and P2 as data/address bus, and P3.6 and P3.7 as write and read timing signals. When EXTRAM = 1, MOVX @Ri and MOVX @DPTR will be similar to the standard 8051. Using MOVX @Ri provides an 8-bit address with multiplexed data on Port 0. Other output port pins can be used to output higher order address bits. This provides external paging capabilities. Using MOVX @DPTR generates a 16-bit address. This allows external addressing up the 64 kB. Port 2 provides the high-order eight address bits (DPH), and Port 0 multiplexes the low order eight address bits (DPL) with data. Both MOVX @Ri and MOVX @DPTR generates the necessary read and write signals (P3.6 - WR and P3.7 - RD) for external memory use. Table 9 shows external data memory RD, WR operation with EXTRAM bit. The stack pointer (SP) can be located anywhere within the 256 bytes of internal RAM (lower 128 bytes and upper 128 bytes). The stack pointer may not be located in any part of the expanded RAM. [1] Access limited to ERAM address within 0 to 0FFH; cannot access 100H to 02FFH. Table 9: External data memory RD, WR with EXTRAM bit AUXR MOVX @DPTR, A or MOVX A, @DPTR MOVX @Ri, A or MOVX A, @Ri ADDR < 0300H ADDR ≥ 0300H ADDR = any EXTRAM = 0 RD/WR not asserted RD/WR asserted RD/WR not asserted EXTRAM = 1 RD/WR asserted RD/WR asserted RD/WR asserted |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |