HFBR-RXXYYYZ datasheet(3/11 Pages) BOARDCOM

3 / 11 page

HFBR-4526Z

, HFBR-4525Z

HFBR-4525Z

Plastic Fiber Connector Styles

Connector Description

Four connector styles are available for termination of

plastic optical fiber: simplex, simplex latching, duplex

and duplex latching. All connectors provide a snap-in

action when mated to Versatile Link components.

Simplex connectors are color coded to facilitate identi-

fication of transmitter and receiver connections. Duplex

connectors are keyed so that proper orientation is

ensured during insertion. If the POF cable/connector will

be used at extreme operating temperatures or experi-

ence frequent and wide temperature cycling effects, the

cable/connector attachment can be strengthened with

an RTV adhesive (see Plastic Connectoring Instructions

for more detail). The connectors are made of a flame re-

tardant VALOX UL94 V-0 material (UL file # E121562).

SIMPLEX CONNECTOR STYLES

HFBR-4501Z/4511Z – Simplex

DUPLEX CONNECTOR STYLES

HFBR-4506Z – Duplex

The simplex connector provides a quick and stable con-

nection for applications that require a component-to-

connector retention force of 8 Newtons (1.8 lb.). These

connectors are available in gray (HFBR-4501Z) or blue

(HFBR-4511Z). The simplex connector is compatible with

horizontal or vertical or tilted packages.

HFBR-4503Z/4513Z – Simplex Latching

The simplex latching connector is designed for rugged

applications requiring a greater retention force — 80

Newtons ( 18 lb.) — than provided by a simplex non-

latching connector. When inserting the simplex latching

connector into a module, the connector latch mecha-

nism should be aligned with the top surface of the

horizontal package, or with the tall vertical side of the

vertical package or with top surface of tilted package.

Misalignment of an inserted latching connector into

either module will not result in a positive latch. The con-

nector is released by depressing the rear section of the

connector lever, and then pulling the connector assem-

bly away from the module housing.

The simplex latching connector is available in gray (HF-

BR-4503Z) or blue (HFBR-4513Z).

Duplex connectors provide convenient duplex cable

termination and are keyed to prevent incorrect insertion

into duplex configured modules. The duplex connector

is compatible with dual combinations of horizontal, ver-

tical or tilted packages (e.g., two horizontal transmitters,

two vertical receivers, a horizontal transmitter with a

horizontal receiver, etc.). The duplex non-latching con-

nector is available in parchment, off-white (HFBR-4506Z).

HFBR-4516Z – Duplex Latching

The duplex latching connector is designed for rugged

applications requiring greater retention force than

the nonlatching duplex connector. When inserting the

duplex latching connector into a module, the connector

latch mechanism should be aligned with the top surface

of the dual combination of horizontal, vertical or tilted

packages. The duplex latching connector is available in

gray (HFBR-4516Z).

Feedthrough/Splice

HFBR-4505Z/4515Z Bulkhead Adapter

The HFBR-4505Z/4515Z adapter mates two simplex

connectors for panel/bulkhead feedthrough of HFBR-

4501Z/4511Z terminated plastic fiber cable. Maximum

panel thickness is 4.1 mm (0.16 inch). This adapter can

serve as a cable in-line splice using two simplex connec-

tors. The adapters are available in gray (HFBR-4505Z) and

blue (HFBR-4515Z). This adapter is not compatible with

POF duplex, POF simplex latching, or HCS connectors.

DUPLEX

CRIMP RING

HFBR-4526Z

HFBR-RXXYYYZ Datasheet(PDF) 3 Page - Broadcom Corporation.

HFBR-RXXYYYZ Datasheet(HTML) 3 Page - Broadcom Corporation.

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL