8563 datasheet(23/23 Pages) PHOENIX

23 / 23 page

AXL E S3 DI8 DO4 2A M12 6P

8563_en_04

PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany

phoenixcontact.com

Delivery state/default settings

By default upon delivery, the following functions and fea-

tures are available:

IP settings

Firmware update

Web-based Management (WBM)

Restoring the default settings

The following options are available for restoring the default

settings:

Rotary encoding switch

Switch position 0F, for further information see section “Con-

figuration via rotary coding switch”.

Web-based Management (WBM)

Navigate to “Manage > Default settings” and follow the in-

structions.

Firmware started

Once you have connected the power, the firmware is

started.

After completion of the firmware boot process, the RDY LED

lights up green.

Firmware update

In order to update the firmware of the device, the device

must be provided with a firmware container via a TFTP

server or it must be loaded onto the device via FTP. Any FTP

client or TFTP server can be used for this. The update must

always be initiated by the web-based management. When

carrying out the firmware update, the RDY LED flashes yel-

low.

WBM - Web-based management

The device has a web server, which generates the required

pages for web-based management and, depending on the

requirements of the user, sends them to a standard web

browser. Web-based management can be used to access

static information (e.g., technical data, MAC address) or dy-

namic information (e.g., IP address, status information).

Calling web-based management

The device web server can be addressed using the IP ad-

dress if configured accordingly. The homepage (web page)

of the device is accessed by entering the URL “http://ip-ad-

dress”.

Example: http://192.168.0.20

The default user name is “admin”, the default password is

“private”.

Device description file (SDDml)

A configuration file (SDDml) is provided for parameterization

in an engineering system.

Parameterization can then be carried out by the Sercos

master.

If several versions of the configuration file are available,

make sure that you are working with the file version that cor-

responds to the firmware/hardware version used.

Sercos address:

IP address:

192.168.0.20

Subnet mask:

255.255.255.0

Gateway address:

192.168.0.1

Firmware update on next re-

start:

deactivated

TFTP server IP address:

192.168.210.211

Firmware file name:

FIRMWARE.NXF

User name:

admin

Password:

private

If you cannot access the WBM pages, check

the connection settings in your browser and

deactivate the proxy, if set.

For the latest device description files, visit

phoenixcontact.net/products.

8563 Datasheet(PDF) 23 Page - PHOENIX CONTACT

8563 Datasheet(HTML) 23 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Datasheet Download

Link URL