Characteristics

Version 4.3

8 / 8

www.pfc-device.com

PRM034N06D

5. Ordering information

Part Number

Package

Delivery mode

PRM034N06D

TO-252 (D-PAK)

2500 pcs / 13" diameter reel

Mechanical



Molder Plastic: UL Flammability Classification Rating 94V-0



Device Weight : 0.01 ounces (0.3grams) - TO-252 (D-PAK)

PFC Device Corp reserves the right to make changes without further notice to any products herein. PFC

Device Corp makes no warranty, representation or guarantee regarding the suitability of its products for any

particular purpose, nor does PFC Device Corp assume any liability arising out of the application or use of

any product or circuit, and specifically disclaims any and all liability, including without limitation special,

consequential or incidental damages. “Typical” parameters which may be provided in PFC Device Corp data

sheets and/or specifications can and do vary in different applications and actual performance may vary over

time. All operating parameters, including “Typical” must be validated for each customer application by

customer’s technical experts. PFC Device Corp does not convey any license under its patent rights nor the

rights of others. PFC Device Corp products are not designed, intended, or authorized for use as components

in systems intended for surgical implant into the body, or other applications intended to support or sustain

life, or for any other application in which the failure of the PFC Device Corp product could create a situation

where personal injury or death may occur. Should Buyer purchase or use PFC Device Corp products for any

such unintended or unauthorized application, Buyer shall indemnify and hold PFC Device Corp and its

officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or

death associated with such unintended or unauthorized use, even if such claim alleges that PFC Device Corp

was negligent regarding the design or manufacture of the part.