Type XHHW-2 or RHH/RHW-2/USE-2

GenFree

2

Specifications 5075, 5125 & 5275

GenFree II LSZH XLPO Low-Voltage Power

Single and Dual Layer Cross-linked Polyolefin Single Conductor

Rated for 600 Volts or 2000 Volts (AC or DC)

For Use in all Closed Environments, Commercial / Utility / Industrial Applications, Free Air or Direct Burial

I.

SCOPE

This specification covers single conductor wire and cable rated at 600 volts or 2000 volts, AC or DC,

insulated with General Cable’s Low-Smoke, Zero-Halogen insulation, a thermosetting irradiation

cross-linked polyolefin which is flame-retardant, moisture- and oil-resistant, and mechanically tough.

II.

APPLICATION DOCUMENTS

The wire and cable manufactured under this specification shall be tested and inspected in

accordance with the latest issues of the following standards, as applicable or as modified herein:

ASTM B33

Standard for Tin-Coated Soft or Annealed Copper Wire (5075 & 5275)

ASTM B3

Standard for Soft or Annealed Copper Wire (5125)

ASTM B8

Standard for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-

Hard, or Soft

UL 854

Standard for Service-Entrance Cables (5075 & 5275)

IEEE Std 1202

Standard for Flame-Propagation Testing of Wire and Cable

ICEA S-95-658

ICEA/NEMA Standard for Non-shielded Power Cables Rated 2000 Volt

or Less for Distribution of Electrical Energy (NEMA WC 70)

ICEA T-33-655

ICEA/NEMA Standard for Low-Smoke, Zero-Halogen (LSZH) Polymeric

Cable Jackets

UL 44

Standard for Thermoset-Insulated Wires and Cables

UL 1685

Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test

for Electrical and Optical-Fiber Cables