** This data sheet is only for model selection. For business, engineering specification by model must be used.

General Purpose

4-2

-Clark-

JUL. 2014

Rated

60W

SNP-CK6 Series

Output Specifications:

1. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the

specified accuracy range at rated load.

2. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.

3. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load.

4. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal

line. For SNP-CK66 and SNP-CK6B, one extra 1 uF electrolytic capacitor should be added.

5. Hold up time is measured from the end of the last charging pulse to the time which the main output drop down to regulation limit at rated load and nomi-

nal line.

6. Model Selection:

SNP-CK6x is for ITE application.

Note:

SNP-CK66

+5V

0A

8A

+4.95V~+5.05V

50mVpp

±1%

±3%

SNP-CK67

+12V

0A

5A

+11.4V~+12.6V

±1%

±1%

±3%

SNP-CK68

+15V

0A

4A

+14.75V~+15.3V

±1%

±0.5%

±1%

SNP-CK69

+24V

0A

2.5A

+23.28V~+24.72V

±1%

±1%

±3%

SNP-CK6T

+48V

0A 1.25A

+46.56V~+49.44V

±1%

±1%

±3%

SNP-CK6B

+3.3V

0A

8A

+3.26V~+3.34V

50mVpp

±0.5%

±3%

MODEL

OUTPUT

LOAD

VOLTAGE

RIPPLE

LINE

LOAD

NO.

RAIL

MIN. RATED MAX. PEAK

ACCURACY

NOISE

REG.

REG.