TLE75620-EST datasheet(12/81 Pages) INFINEON

12 / 81 page

Datasheet

Rev. 1.0

2017-11-23

TLE75620-EST

SPIDER+ 12V

General Product Characteristics

Notes

1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the

data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are

not designed for continuous repetitive operation.

4.2

Functional Range

Note:

Within the functional or operating range, the IC operates as described in the circuit description. The

electrical characteristics are specified within the conditions given in the Electrical Characteristics

table.

ESD Susceptibility CDM

Pin 1, 12, 13, 24 (corner pins)

VESD

-750

–

750

CDM

P_4.1.52

ESD Susceptibility CDM

VESD

-500

–

500

CDM

P_4.1.54

1) Not subject to production test, specified by design.

2) For a duration of ton = 400 ms; ton/toff = 10%; limited to 100 pulses

3) Device is mounted on a FR4 2s2p board according to Jedec JESD51-2,-5,-7 at natural convection; the Product

(Chip+Package) was simulated on a 76.2 *114.3 *1.5 mm board with 2 inner copper layers (2 * 70 µm Cu, 2 * 35 µm Cu).

Where applicable a thermal via array under the exposed pad contacted the first inner copper layer.

4) Pulse shape represents inductive switch off: IL(t) = IL(0) x (1 - t / tpulse); 0 < t < tpulse

5) ESD susceptibility, HBM according to ANSI/ESDA/JEDEC JS001 (1.5k Ω, 100 pF)

6) ESD susceptibility, Charged Device Model “CDM” ESDA STM5.3.1 or ANSI/ESD S.5.3.1

Table 3

Functional range

Parameter

Symbol

Values

Unit

Note or

Test Condition

Number

Min.

Typ.

Max.

Supply Voltage Range for

Normal Operation

VS(NOR)

7–

–

P_4.2.1

Upper Supply Voltage Range

for Extended Operation

VS(EXT,UP)

–

Parameter

deviation possible

P_4.2.2

Lower Supply Voltage Range

for Extended Operation

VS(EXT,LOW) 3

–

Parameter

deviation possible

P_4.2.3

Junction Temperature

-40

–

150

°C

–

P_4.2.4

Logic supply voltage

VDD

3–

5.5

–

P_4.2.5

Table 2

Absolute Maximum Ratings (cont’d)1)

TJ = -40 °C to +150 °C

all voltages with respect to ground, positive current flowing into pin (unless otherwise specified)

Parameter

Symbol

Values

Unit Note or

Test Condition

Number

Min.

Typ. Max.

TLE75620-EST Datasheet(PDF) 12 Page - Infineon Technologies AG

TLE75620-EST Datasheet(HTML) 12 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81

Datasheet Download

Link URL