Ver.1.01

DIO-48DX-USB

２

Hardware specification

Item

Specification

I/O

I/O format

Unisolated TTL-level I/O (Positive logic) *1

Number of I/O channels

48 channels (all available for interrupts)

Pull-up registance

10k

Ω

Interrupt

48 interrupt input signals are arranged into a single output of

interrupt signal INTA.

An interrupt is generated at the rising edge (LOW-to-HIGH

transition).

Response time

Within 200nsec

Rated output current

USB section

Bus specification

USB Specification 2.0/1.1 standard

USB transfer rate

12Mbps (Full-speed), 480Mbps (High-speed) *2

Power supply

Self-power

Common section

Number of terminals

used at the same time

127 terminals (Max.) *3

Dielectric strength

250Vrms

Current consumption

(Max.)

5VDC

550mA

Operating

conditions*4

*5

0 - 50ºC, 10 - 90%RH (No condensation)

Allowable distance of

signal extension

Approx. 1.5m (depending on wiring environment)

Physical

dimensions

(mm)

180(W) x 140(D) x 34(H) (No protrusions)

Weight

400g (Not including the USB cable, attachment)

Connector

96 pin half pitch connector [M (male) type]

PCR-E96LMD+

[mfd. by HONDA TSUSHIN KOGYO CO., LTD.] or equivalent to it

Attached cable

USB cable 1.8m

*1

Data “1” and “0” correspond to the High and Low levels, respectively.

*2

This depends on the PC environment used (OS and USB host controller).

*3

As a USB hub is also counted as one device, you cannot just connect 127 USB unit.

*4

To suppress the heating, ensure that there are spaces for ventilation (about 5cm) around

this product.

*5

When using the attached AC adaptor POA200-20-2, it is 0 - 40

°C

AC adapter environmental condition

(environmental specification)

Item

Specification

Input voltage range

90 - 264VAC

Rated input current

300mA

Number of frequency

50 - 60Hz

Rated output voltage

5.0VDC

Rated output current

2.0A (Max.)

Dimension (mm)

47.5(W) x 75(D) x 27.3(H) (No protrusions)

Weight

175g

Operating

temperature

0 - 40ºC

Operating humidity

20 - 80%RH(No condensation)

Life expectancy

4 years at the ambient temperature 40 C (When 100VAC is input and

1.3A is output)

Allowable time of

short interruption

15ms (Max.) (When 100VAC is input and 1.3A is output) *1

Floating dust particles Not to be excessive

Corrosive gases

None

Voltage

corresponding to the

attached AC cable

125VAC 7A

*1

When the short interruption occurs and the defective operation of the equipment is

generated, please insert the power supply of the equipment after pulling out it.

Windows version of digital I/O driver

API-DIO(WDM)

[Stored on the bundled CD-ROM driver library

API-USBP(WDM)]

It is the library software, and which supplies command of

hardware produced by our company in the form of standard

Win32 API function (DLL).

Using programming languages

supporting Win32API functions, such as Visual Basic and

Visual C++ etc., you can develop high-speed application

software with feature of hardware produced by our company.

In addition, you can verify the operation of hardware using

Diagnostic programs.

< Operating environment >

OS

Windows 7, Server 2008, Vista, XP,

Server 2003, 2000, Me, 98

Adaptation language Visual Basic, Visual C++, Visual C#,

Delphi, C++ Builder

You can download the updated version from the CONTEC’s

Web site (http://www.contec.com/product/device/apiusbp/).

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Data acquisition VI library for LabVIEW

VI-DAQ

(Available for downloading (free of charge) from the CONTEC

web site.)

This is a VI library to use in National Instruments LabVIEW.

VI-DAQ is created with a function form similar to that of

LabVIEW's Data Acquisition VI, allowing you to use various

devices without complicated settings.

See http://www.contec.com/vidaq/ for details and download of VI-DAQ.

Cable (Option)

Shield Cable with 96-Pin Half-Pitch Connectors at Both Ends

: PCB96PS-0.5P (0.5m)

: PCB96PS-1.5P (1.5m)

Flat Cable with 96-Pin Half-Pitch Connectors at Both Ends

: PCB96P-1.5 (1.5m)

Shield Cable with 96-Pin Half-Pitch Connectors at One End

: PCA96PS-0.5P (0.5m)

: PCA96PS-1.5P (1.5m)

Flat Cable with 96-Pin Half-Pitch Connectors at One End

: PCA96P-1.5 (1.5m)

Flat cable with single-ended connector for 50-pin

: PCA50J-1.5 (1.5m)

Connector (Option)

Half-pitch 96-pin Male Connector Set (5 Pieces)

: CN5-H96

Cable & Connector

Support Software

Specification