Silicom Ltd. Connectivity Solutions

Page

5

Immunity for ITE Amendment A1: 2001

CE EN 61000-3-2 2000, Class A

Harmonic Current Emissions

CE EN 61000 3-3 1995, Amendment A1: 2001

Voltage Fluctuations and Flicker

CE IEC 6100-4-2: 1995

ESD Air Discharge 8kV. Contact Discharge 4kV.

CE IEC 6100-4-3:1995

Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz

CE IEC 6100-4-4:1995

EFT/B: Immunity to electrical fast transients 1kV Power

Leads, 0.5Kv Signals Leads

CE IEC 6100-4-5:1995

Immunity to conductive surges COM Mode; 2kV,

Dif. Mode 1kV

CE IEC 6100-4-6:1996

Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.

By 1kHz

CE IEC 6100-4-11:1994

Voltage Dips and Short Interruptions

V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

MTBF:

217 (Years)

*According to Telcordia SR-332 Issue 1

Environmental condition

– GB (Ground, Fixed, Controlled). Ambient temperature – 25°C.

Temperature rise of 15°C above the system ambient temperature was assumed for the cards

components

LEDs

LEDs:

Left LED : Link:

Turns on Yellow Any Speed Link.

Right LED: Link/Act :

Turns on link (Green),

Blinks on activity (Green)

LEDs location:

LEDs are located on the PCB, visible via holes in the metal bracket. Each Green Link/Act and

Bi-color Link Speed LEDs are located above their own SFP connector port by light pipes

Connectors:

Small Form Factor Pluggable (SFP) Cage (4X1)