| Electronic Components Datasheet Search |
|
XRT75L03 Datasheet(PDF) 13 Page - Exar Corporation |
|
|
|||||||||||||||||||||||||||||
XRT75L03 Datasheet(HTML) 13 Page - Exar Corporation |
|
13 / 92 page ![]() XRT75L03 THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR REV. 1.0.4 10 SYSTEM-SIDE RECEIVE OUTPUT AND RECEIVE CONTROL PINS PIN #SIGNAL NAME TYPE DESCRIPTION 60 104 63 RLOS_0 RLOS_1 RLOS_2 O Receive Loss of Signal Output Indicator - Channel 0: Receive Loss of Signal Output Indicator - Channel 1: Receive Loss of Signal Output Indicator - Channel 2: This output pin indicates whether or not the corresponding channel is declaring the Loss of Signal (LOS) Defect condition. "Low" - Indicates that the corresponding Channel is NOT currently declaring the LOS defect condition. "High" - Indicates that the corresponding Channel is currently declaring the LOS defect condition. 61 103 64 RLOL_0 RLOL_1 RLOL_2 O Receive Loss of Lock Output Indicator - Channel 0: Receive Loss of Lock Output Indicator - Channel 1: Receive Loss of Lock Output Indicator - Channel 2: This output pin indicates whether or not the corresponding channel is declaring the Loss of Lock (LOL) Condition. "Low" - Indicates that the corresponding Channel is NOT declaring the LOL con- dition. "High" - Indicates that the corresponding Channel is currently declaring the LOL condition. NOTE: The Receive Section of a given channel will declare the LOL condition anytime the frequency of the Recovered Clock (RCLK) signal differs from that of the E3CLK input clock signal (if the channel is operating in the E3 Mode), the DS3CLK input clock signal (if the channel is operating in the DS3 Mode) the STS-1CLK input clock signal (if the channel is operating in the STS-1 Mode), or that clock signal which is derived from the SFM Clock Synthesizer block (if the chip is operating in the Single-Frequency Mode) by 0.5% (or 5000ppm) or more. 58 112 53 RPOS_0/RDATA_0 RPOS_1/RDATA_1 RPOS_2/RDATA_2 O Receive Positive Data Output - Receive Data Output - Channel 0: Receive Positive Data Output - Receive Data Output - Channel 1: Receive Positive Data Output - Receive Data Output - Channel 2: The function of these output pins depends upon whether the channel/device has been configured to operate in the Single-Rail or Dual-Rail Mode. Dual-Rail Mode - Receive Positive Polarity Data Output If the channel/device has been configured to operate in the Dual-Rail Mode, then all positive-polarity data will be output via this output pin. The negative- polarity data will be output via the corresponding RNEG_n output pin. In other words, the Receive Section of the corresponding Channel will pulse this output pin "High" for one period of RCLK_n anytime it receives a positive-polarity pulse via the RTIP/RRING input pins. The data that is output via this pin is updated upon a user-selectable edge of the RCLK_n output clock signal. Single-Rail Mode - Receive Data Output If the channel/device has been configured to operate in the Single-Rail Mode, then all Receive (or Recovered) data will be output via this output pin. The data that is output via this pin is updated upon a user-selectable edge of the RCLK_n output clock signal. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |