TLE5041plusC

Specification

3.3

Operating Range

The following operating conditions must not be exceeded in order to ensure correct operation of the

TLE5041plusC.

All parameters specified in the following sections refer to these operating conditions, unless otherwise noted.

Table 3

Operating range

Parameter

Note / Test Condition

Supply voltage

1)

Supply voltage modulation

2)

V

Operating junction temperature

limited to 10000 h

limited to 5000 h

limited to 2500 h

limited to 500 h

Junction temperature variation

3) 4)

no unwanted or missing pulses

Magnetic induction amplitude at

T

each GMR element

4) 5)

Differential magnetic induction

4) 5)

T

Static differential magnetic pre-

induction

4)

Dynamic and static homogeneous

In calibrated mode. Same field at

external disturbance fields 4)

both probes, no unwanted pulses

Magnetic signal frequency 4)

1) Directly at the sensor pins, not including the voltage drop at R

2) Sinusoidal shape of supply voltage variation.

3) Junction temperature change homogenously distributed on the die, equal change at both iGMR sensing elements.

4) Not subject to production test, verified by design/characterisation.

5) Consider magnetic induction temperature coefficient of -0.18 %/K.

Data Sheet

15

V 1.2, 2018-01-18

Symbol

Values

Unit

Min.

Typ.

Max.

V

DD

4.5

20

V

V

AC

6

Vpp

T

j

either

-40

125

°C

or

-40

150

°C

or

-40

160

°C

or

-40

170

°C

T

j_var

-20

20

K/s

B

X

-75

75

mT

dB

X

-150

150

mT

dB

Xoffset

-2

2

mT

2

mT

f

MAG

1

5000

Hz