M34E02 datasheet(11/23 Pages) STMICROELECTRONICS

11 / 23 page

11/23

M34E02

Figure 10. Read Mode Sequences

Note: 1. The seven most significant bits of the Device Select Code of a Random Read (in the 1st and 3rd bytes) must be identical.

Read Operations

Read operations are performed independently of

whether hardware or software protection has been

set.

The device has an internal address counter which

is incremented each time a byte is read.

Random Address Read

A dummy Write is first performed to load the ad-

dress into this address counter (as shown in Fig-

ure 10) but

without sending a Stop condition.

Then, the bus master sends another Start condi-

tion, and repeats the Device Select Code, with the

RW bit set to 1. The device acknowledges this,

and outputs the contents of the addressed byte.

The bus master must

not acknowledge the byte,

and terminates the transfer with a Stop condition.

Current Address Read

For the Current Address Read operation, following

a Start condition, the bus master only sends a De-

vice Select Code with the RW bit set to 1. The de-

vice acknowledges this, and outputs the byte

addressed by the internal address counter. The

counter is then incremented. The bus master ter-

minates the transfer with a Stop condition, as

shown in Figure 10,

without acknowledging the

byte.

DEV SEL *

BYTE ADDR

DEV SEL

DATA OUT 1

AI01942

DATA OUT N

CURRENT

ADDRESS

READ

DEV SEL

DATA OUT

RANDOM

ADDRESS

READ

DEV SEL *

DATA OUT

SEQUENTIAL

CURRENT

READ

DATA OUT N

DEV SEL *

BYTE ADDR

SEQUENTIAL

RANDOM

READ

DEV SEL *

DATA OUT 1

ACK

R/W

NO ACK

ACK

R/W

ACK

R/W

ACK

NO ACK

R/W

NO ACK

ACK

R/W

ACK

R/W

ACK

NO ACK

M34E02 Datasheet(PDF) 11 Page - STMicroelectronics

M34E02 Datasheet(HTML) 11 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Datasheet Download

Link URL