MODEL: 10BXC

http://www.m-system.co.jp/

10BXC SPECIFICATIONS

ES-0893 Rev.12 Page 2/7

Power RUN LED: Light turns on in normal conditions

(supplied only with dual-redundant power supply or two

independent power sources)

OUTPUT SPECIFICATIONS

■ Alarm Output

(Supplied only with dual-redundant power supply or two

independent power sources)

Rated load: 250 V AC @ 3 A (cos ø = 1)

30 V DC @ 3 A (resistive load)

Maximum switching voltage: 250 V AC or 125 V DC

Maximum switching power: 750 VA or 60 W

Minimum load: 5 V DC @ 100 mA

INSTALLATION

Supply pressure: Refer to the data sheet for I/P transducers

(power distribution & pressure supply type)

Power consumption

•AC: 130 VA min.

•DC: 2.5 A min.

Operating temperature: -5 to +55°C (23 to 131°F) 0 to 50°C

(32 to 122°F) for AC power

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: JIS or EIA standard rack

Weight

Single power supply w/o power units:

3.0 kg (6.6 lb) with DC power type

3.5 kg (7.7 lb) with AC power type

Dual-redundant or two independent power sources:

3.5 kg (7.7 lb) with AC/DC power type

4.0 kg (8.8 lb) with AC/AC power type

Add 2 kg (4.4 lb) for air manifold type.

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute (I/O connector to

alarm output to power)

1500 V AC @ 1 minute (power to FG)

500 V AC @ 1 minute (I/O connector or alarm output to FG,

1000 AC with power input code R)

Maximum supply pressure: 196 kPa