ADRV9002BBCZ datasheet(58/92 Pages) AD

58 / 92 page

Data Sheet

ADRV9002

TYPICAL PERFORMANCE CHARACTERISTICS

analog.com

Rev. 0 | 58 of 92

NARROW-BAND

Device configuration profile: receiver = 25 kHz bandwidth, receiver IF = 490 kHz, I/Q rate = 144 kHz, transmitter = 25 kHz bandwidth, I/Q rate

= 144 kHz, device clock = 38.4 MHz, and an internal LO is used for all measurements. Measurements are at nominal power supply voltages.

All RF specifications are based on measurements that include PCB and matching circuit losses, unless otherwise noted. Specifications are

applicable over the lifetime of the device.

30 MHz LO

The temperature settings refer to the die temperature. All LO frequencies are set to 30 MHz, unless otherwise noted.

Figure 178. Receiver Absolute Gain (Complex) vs. Gain Index, Baseband

Frequency = 2.1 kHz, ADC = High Performance, POUT = −9.6 dBFS

Figure 179. Receiver Noise Figure vs. Gain Index, Baseband Frequency = 2.1

kHz, ADC = High Performance

Figure 180. Receiver Noise Figure vs. Gain Index, Baseband Frequency = 2.1

kHz, ADC = Low Power

Figure 181. Receiver Second-Order Harmonic Distortion vs. Gain Index,

Baseband Frequency = 2.1 kHz, ADC = High Performance

ADRV9002BBCZ Datasheet(PDF) 58 Page - Analog Devices