MODEL: MSP4D

MSP4D SPECIFICATIONS

ES-4803 Rev.8 Page 4/5

http://www.m-system.co.jp/

ITEM

ACCESS FUNCTION

RANGE

Retry

Set / Get Set Retry Times

Range: 1 to 255

The actuator tries to restart for the number of preset “Retry” times.

Default: 5

IllegalInputOPN

Set / Get Illegal Input Operation

0 : Input limit position

Set the actuator’s operation in case of an illegal input.

1 : Stop

2 : 0% position

3 : 100% position

Default: 0

COMM ErrorOPN

Get

0 : Stop

Shows the communication error operation setting on the control

1 : 0% position

circuit board of the actuator.

2 : 100% position

COMM FaultTime

Set / Get Set Stand-by Time Before Starting Communication Error Operation

Range: 10 to 255

The time to wait in case of an communication error before starting the

Default: 10 (sec.)

pre-designated operation.

Direction

Set / Get Set Input Action

0 : Reverse

Direct action: 100% output at 0% input

1 : Direct

Reverse action: 0% output at 0% input

Default: 0

Not related to relations between Present Position (position output) and

actual stem position.

MIN input

Set / Get Position Target Input Limit

Range: -50 to 10000

Set the lower limit of “Input as Target.”

Default: -50 (×0.01%)

Any input below the setpoint is clamped to the set value.

MAX input

Set / Get Position Target Input Limit

Range: 0 to 10050

Set the upper limit of “Input as Target.”

Default: 10050 (×0.01%)

Any input above the setpoint is clamped to the set value.

Input as Zero

Set / Get Input Scaling (such as for Split Control)

Range: -50 to 10000

“Input as Target” value for 0% output stem position setpoint.

Default: 0 (×0.01%)

Input as Full

Set / Get Input Scaling (such as for Split Control)

Range: 0 to 10050

“Input as Target” value for 100% output stem position setpoint.

Default: 10000 (×0.01%)

DeadlockCNTR

Set / Get Deadlock Counter

Range: 0 to 65535 (×1)

Shows the totalized number of Retries at a deadlock.

LastDeadlockPOSN Get

Range: -50 to 10050

Shows the output stem position at the last deadlock.

(×0.01%)

Default: 32767

(invalid data)

Set / Get Motor Starting Counter

Range: 0 to 4294967295

Shows the totalized number of starting the motor.

(×1)

Range: 0 to 4294967295

Shows the totalized number of reversing the motor direction.

(×1)

Accumulated MVT Set / Get Accumulated Running Distance

Range: 0 to 4294967295

*

Shows the acculated running distance. 100% span defined with Zero

(×0.1%)

and Span adjustments on the PCB.

* Data stored every 10 minutes.