MODEL: R5-DC4

R5-DC4 SPECIFICATIONS

ES-6126 Rev.10 Page 1/3

https://www.m-system.co.jp/

Remote I/O R5 Series

DISCRETE OUTPUT MODULE

(relay contact output, 4 points)

96.5

(3.80)

18 (.71)

90

(3.54)

mm (inch)

MODEL: R5–DC4[1][2]

ORDERING INFORMATION

• Code number: R5-DC4[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R5-DC4W/Q)

• Specify the specification for option code /Q

(e.g. /C01)

NO. OF CHANNELS

4: 4-point outputs

[1] COMMUNICATION MODE

S: Single

W: Dual

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

Output: Euro type connector terminal

stripped length 7 mm)

Internal power: Via the base (model: R5-BS)

Isolation: Do1 or Do2 to Do3 or Do4 to internal bus or

internal power

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

Output status indicator: Red LED; turns on with the outputs

ON.

OUTPUT SPECIFICATIONS

Output: Relay contact, 4 points

Common: Every 2 points

Rated load: 250 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 0.5 A (resistive load)

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 150 W

Minimum load: 1 V DC @ 1 mA

When driving an inductive load, external contact protection

and noise quenching recommended.

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (0.22 lb)

PERFORMANCE

Data allocation: 1

Response time: ≤ 0.1 sec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (Do 1 or Do 2 to

Do 3 or Do 4 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1, EN 61010-2-201

Measurement Category II (output)

Pollution Degree 2

Output to internal bus or internal power – Basic insulation

(300 V)

RoHS Directive