CMD201P5 datasheet(10/10 Pages) QORVO

10 / 10 page

Custom MMIC

300 Apollo Drive Chelmsford, MA 01824 Phone (978) 467-4290 Fax (978) 467-4294

Visit us online at www.custommmic.com

ver 1.2 0418

Applications Information

The CMD201P5 is biased with a positive drain supply, a negative gate1 supply and a positive gate2

supply. Performance is optimized when the drain voltage is set to +10 V. The recommended gate1 and

gate2 voltages are -0.55 V and +5 V respectively.

Turn ON procedure:

1.Apply gate voltage Vgg1 and set to -2 V

2.Apply drain voltage Vdd and set to +10 V

3.Apply gate voltage Vgg2 and set to +5V

4.Increase Vgg1 (less negative) to achieve a drain current of 400 mA

Turn OFF procedure:

1.Turn off gate voltage Vgg2

2.Turn off drain voltage Vdd

3.Turn off gate voltage Vgg1

CMD201P5

DC-20 GHz Distributed Power Amplifier

Biasing and Operation

Note: Drain voltage (Vdd) must be applied through a broadband bias tee or external bias network.

External DC block is required on RF input.

Application Circuit

Please note, all information contained in this data sheet is subject to change without notice.

CMD201P5 Datasheet(PDF) 10 Page - Qorvo, Inc