Custom MMIC

300 Apollo Drive Chelmsford, MA 01824 Phone (978) 467-4290 Fax (978) 467-4294

Visit us online at www.custommmic.com

ver 1.0 1017

Pin

Function

Description

Schematic

2

LO

This pin is DC coupled and matched to 50

ohms.

5

IF

This pin is DC coupled. For applications

not requiring operation to DC, this port

should be DC blocked externally using a

series capacitor whose value has been cho-

sen to pass the necessary IF frequency

range. For operation to DC, this pin must

not source or sink more than 16 mA of cur-

rent or part non-function or part failure may

result.

8

RF

This pin is DC coupled and matched to 50

ohms.

10-12

N/C

No connection required. These pins may

be connected to RF/DC ground

1,3,4,6,7,9 and

die paddle

Ground

Connect to RF / DC ground.

Pin Diagram

Functional Description

Pin Description

GND

CMD253C3

6-14 GHz High IP3 Fundamental Mixer

LO

RF

IF