MODEL: R8-TC2

R8-TC2 SPECIFICATIONS

ES-9788 Rev.5 Page 3/7

http://www.m-system.co.jp/

(The described accuracy may be partially not

satisfied when the input temperature is below 0°C. Consult

factory.)

Temp. coefficient

• Pv1 or Pv2: ±0.03 %/°C (± 0.02 %/°F)

• CT1 or CT2: ±0.03 %/°C (± 0.02 %/°F)

Response time

• CT1 or CT2: ≤ 2 sec. (0 – 90 %)

• Mv1 or Mv2: ≤ 1 sec. (0 – 90 %, DC output)

Burnout response time: ≤ 1 sec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1000 V AC @1 minute (Pv1 to Pv2 to

Mv1 to Mv2 to exc.supply to CT1 or CT2 or internal bus or

internal power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

CONTROL MODE

Choose from two control mode shown below with

configurator software.

■ Standard PID control

It is available to control two independent loops.

Loop 1: Control by Pv1 and Mv1.

Loop 2: Control by Pv2 and Mv2.

■ Heating and cooling PID control

It is available to control one loop.

Loop 1: Control by Pv1, heating Mv1 and cooling Mv2.

Loop 2 is not available.