Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Distance sensor

OMT550-R200-UEP-IO-V1

4

The analog output type can be configured as voltage or current output via IO-Link.

The following output types are available:

• Analog output 0 mA ...20 mA

• Analog output 4 mA ...20 mA

• Analog output 0 V ...10 V

The following operating modes are available:

• Absolute mode (default setting)

• Normalized mode

• Rising slope

• Falling slope

The following substitute values can optionally be configured:

• No substitute values used (default setting)

• Substitute value for "no measured value" used

• Substitute value for "no measured value" and "Measuring overrange" used

The sensor's tolerances are based on the digital process data.

0

Analog value

Distance

Max. distance

Min. distance

Absolute mode (default setting, A and B = deleted)

No measurement data

0

A/B

Analog value

Distance

Max. distance

Min. distance

Normal mode ( A and B without teach-in / deleted)

No measurement data

0

AB

Analog value

Distance

Max. distance

Min. distance

Rising slope (A < B)

No measurement data