485030

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2020. All rights reserved.

Product short data sheet

COMPANY PUBLIC

Rev. 3.1 — 24 September 2020

485031

21 of 24

NXP Semiconductors

A71CL

Plug & Trust Secure Element for Alibaba Cloud

17. Legal information

17.1

Data sheet status

[1]

Please consult the most recently issued document before initiating or completing a design.

[2]

The term ‘short data sheet’ is explained in section “Definitions”.

[3]

The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

17.2

Definitions

Draft — A draft status on a document indicates that the content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included in a draft version of a document and shall have no

liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local NXP

Semiconductors sales office. In case of any inconsistency or conflict with

the short data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to offer functions and qualities beyond those described in the

Product data sheet.

17.3

Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. NXP Semiconductors takes no

responsibility for the content in this document if provided by an information

source outside of NXP Semiconductors. In no event shall NXP

Semiconductors be liable for any indirect, incidental, punitive, special or

consequential damages (including - without limitation - lost profits, lost

savings, business interruption, costs related to the removal or replacement of

any products or rework charges) whether or not such damages are based on

tort (including negligence), warranty, breach of contract or any other legal

theory. Notwithstanding any damages that customer might incur for any

reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability

towards customer for the products described herein shall be limited in

accordance with the Terms and conditions of commercial sale of NXP

Semiconductors

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication here. — Suitability for use — NXP Semiconductors products

are not designed, authorized or warranted to be suitable for use in life

support, life-critical or safety-critical systems or equipment, nor in applications

where failure or malfunction of an NXP Semiconductors product can

reasonably be expected to result in personal injury, death or severe property

or environmental damage. NXP Semiconductors and its suppliers accept no

liability for inclusion and/or use of NXP Semiconductors products in such

equipment or applications and therefore such inclusion and/or use is at the

customer’s own risk. — Applications — Applications that are described

herein for any of these products are for illustrative purposes only. NXP

Semiconductors makes no representation or warranty that such applications

will be suitable for the specified use without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using NXP Semiconductors products, and NXP

Semiconductors accepts no liability for any assistance with applications or

customer product design. It is customer’s sole responsibility to determine

whether the NXP Semiconductors product is suitable and fit for the

customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers should

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products. NXP Semiconductors does

not accept any liability related to any default, damage, costs or problem

which is based on any weakness or default in the customer’s applications or

products, or the application or use by customer’s third party customer(s).

Customer is responsible for doing all necessary testing for the customer’s

applications and products using NXP Semiconductors products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). NXP does not accept any liability

in this respect. — Limiting values — Stress above one or more limiting

values (as defined in the Absolute Maximum Ratings System of IEC 60134)

will cause permanent damage to the device. Limiting values are stress ratings

only and (proper) operation of the device at these or any other conditions

above those given in the Recommended operating conditions section (if

present) or the Characteristics sections of this document is not warranted.

Constant or repeated exposure to limiting values will permanently and

irreversibly affect the quality and reliability of the device. — Terms and

conditions of commercial sale — NXP Semiconductors products are sold

subject to the general terms and conditions of commercial sale, as published

written individual agreement. In case an individual agreement is concluded

only the terms and conditions of the respective agreement shall apply. NXP

Definition

Objective [short] data sheet

Development

This document contains data from the objective specification for product development.

Preliminary [short] data sheet

Qualification

This document contains data from the preliminary specification.

Product [short] data sheet

Production

This document contains the product specification.