SLDN-06D1Ax

13

Asia-Pacific

+86 755 298 85888

Europe, Middle East

+353 61 225 977

North America

+1 408 785 5200

© 2019 Bel Power Solutions & Protection

Rev. AE.01.19

The SLDN-06D1Ax module should be connected to a low ac-impedance source. A highly inductive source can affect the stability

of the module. An input capacitance must be placed directly adjacent to the input pin of the module, to minimize input ripple voltage

and ensure module stability.

To minimize input voltage ripple, ceramic capacitors are recommended at the input of the module. Figure 37 shows the input ripple

voltage for various output voltages at 6A of load current with 1x22 µF or 2x22 µF ceramic capacitors and an input of 12 V.

Figure 37

Note: Input ripple voltage for various output voltages with 1x22 µF or 2x22 µF ceramic capacitors at the input (6 A load). Input voltage is 12

V.