USB82642 datasheet(57/64 Pages) MICROCHIP

57 / 64 page

 2012-2021 Microchip Technology Inc.

DS60001253F-page 57

USB82642

DS60001253A

cont

Cover page

GPIO1 only is supported.

Added feature: Automotive Breakout box

Chapter 1.0, Introduction

Introduction revised.

Section 1.1.1, "Hardware

Features"

GPIO1 only is supported.

Chapter 2.0, Block Diagram

GPIOs removed (except GPIO1).

Chapter 3.0, Pin Configura-

tion

GPIOs removed (except GPIO1).

PB free information removed.

Chapter 4.0, Pin Table

GPIOs removed (except GPIO1).

Section 5.1, "USB82642 Pin

Description"

GPIOs removed (except GPIO1).

Pin 31 added in section Misc (was missing).

Section 5.4, "ROM BOOT

Sequence"

Figure 5-4: GPIOs removed.

Section 6.1, "Pin Reset

States"

GPIOs removed (except GPIO1).

Section 7.3, "I2C over USB

Bridge"

Table 7-1: GPIOs removed (except GPIO1).

Section 7.5.2, "EEPROM

Data Descriptor"

USB Product ID changed: 0x4041 -> 0x4040

Section 7.5.5.2, "Pull-Up

Resistor"

GPIO (GPIO5, GPIO4) information removed.

Section 8.1, "Maximum

Guaranteed Ratings"

Row “Voltage on GPIO10” removed.

Chapter 10.0, GPIO Usage

GPIOs removed (except GPIO1).

Chapter 10.0, Package

Information

Note added that points to current package informa-

tion.

Appendix C: “References”

Reference 1, reference 2: Version removed.

Rev. 1.1

(07-15-13)

All

Order numbers modified, lead-free information

removed.

Dimple package removed.

Section 5.1, "USB82642 Pin

Description"

Figure 5-1: Column “If pins not used connection”

added.

TABLE A-1:

CUSTOMER REVISION HISTORY (CONTINUED)

Revision Level & Date

Section/Figure/Entry

Correction

USB82642 Datasheet(PDF) 57 Page - Microchip Technology

USB82642 Datasheet(HTML) 57 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL