SH7041A datasheet(497/923 Pages) RENESAS

Part #	SH7041A

Description	Renesas 32-Bit Single-Chip RISC Microprocessor SuperH RISC engine Family/SH7040 Series(CPU Core SH-2)

PDF	923 Pages

Scroll/Zoom	100%

Manufacturer	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

497 / 923 page

459

• Bit 5—Timer Enable (TME): Enables or disables the timer.

Bit 5: TME

Description

Timer disabled: TCNT is initialized to H'00 and count-up stops (initial

value)

Timer enabled: TCNT starts counting. A

WDTOVF signal or interrupt is

generated when TCNT overflows.

• Bits 4 and 3—Reserved: These bits always read as 1. The write value should always be 1.

• Bits 2–0: Clock Select 2–0 (CKS2–CKS0): These bits select one of eight internal clock sources

for input to the TCNT. The clock signals are obtained by dividing the frequency of the system

clock (

φ).

Description

Bit 2: CKS2 Bit 1: CKS1

Bit 0: CKS0

Clock Source

Overflow Interval*

(

φ = 28.7 MHz)

φ/2 (initial value)

17.9 µs

φ/64

573.4 µs

φ/128

1.1 ms

φ/256

2.3 ms

φ/512

4.6 ms

φ/1024

9.2 ms

φ/4096

36.7 ms

φ/8192

73.4 ms

Note: * The overflow interval listed is the time from when the TCNT begins counting at H'00 until

an overflow occurs.

SH7041A Datasheet(PDF) 497 Page - Renesas Technology Corp