STM32CUBEL4 datasheet(7/37 Pages) STMICROELECTRONICS

Part #	STM32CUBEL4

Description	STM32CubeL4 demonstration firmware for 32L476GDISCOVERY discovery kit

PDF	37 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

7 / 37 page

DocID028080 Rev 1

7/37

UM1919

Getting started with demonstration

2.1

Hardware requirements

The hardware requirements to start the demonstration application are as follows:

•

STM32L476G discovery board (Figure 2 and Figure 3) (refer to UM1879 for the

discovery kit description)

•

One “USB type A to Mini-B” cable to power up the discovery board from the USB ST-

LINK (USB connector CN1) and to run in USB-powered mode

•

One CR2032 battery to run in battery mode.

The STM32L476G discovery kit helps to discover the ultra-low-power features and audio

capabilities of the STM32L4 Series. It offers everything required for beginners and

experienced users to get stared quickly and develop applications easily.

Based on an STM32L476VGT6 MCU, it includes an ST-LINK/V2-1 embedded debug tool

interface, Idd current measurement, Quad-SPI Flash memory, an audio codec with 3.5mm

connector, LCD segment display (8x40), LEDs, a joystick and a USB mini-B connector.

STM32CUBEL4 Datasheet(PDF) 7 Page - STMicroelectronics