7

2344SD-2A

Communication

Inserts

5507 Series Faceplate

2344SD-2 Over-the-Raceway Box Application

Catalog No./Item

Description/Specifications

2348D

Device Box – For use with

2300BACD Divided Raceway. For

mounting standard switches,

receptacles and industry

standard faceplates for

communication devices.

Accepts NEMA Faceplates.

2344D

Extra Deep Device Box – For use

with 2300BACD Divided Raceway

when additional depth is required.

For mounting standard switches,

receptacles and industry standard

faceplates for communication

devices. Accepts NEMA Faceplates.

Catalog No./Item

Description/Specifications

2344SD-2A

Two-Gang Deep Divided Box –

A divided two-gang box for use

with 2300D Series Raceway.

Provides the ability to have both

power and low voltage at a single

point of use. Accepts 5507 Series

Wiremold Open System

Communication Modules.

The 2300BAC and 2300BACD Series Divided Raceway Box family provides two unique benefits; labor savings with “over-the-

raceway base to mount boxes. The base snaps on anywhere along the raceway. The Sure-Snap integral device box of the

2344SD-2A combines aesthetics with labor savings. 5507 Series Faceplates, Pass & Seymour Activate Inserts, Wiremold Open

System Communication Modules and Ortronics Series II and TracJack Modules snap directly into the Sure-Snap Device Box,

eliminating the need for additional faceplates. The single-gang boxes accept standard NEMA faceplates.

4 3/4"

(121mm)

4 3/4"

(121mm)

3"

(76mm)

4 7/8"

(124mm)

1 3/4"

(44mm)

2 1/4"

(57mm)

4 3/4"

(121mm)

3"

(76mm)

2 3/4"

(70mm)

Note: Not for use with NEMA Faceplates. CM-EPLA End

Plates are required when using Wiremold Open System

inserts. S2-EPL End Plates are required when using

TracJack modules, use 5507-4TJ or 5507-6TJ Faceplates.