STM32F730V8 datasheet(30/202 Pages) STMICROELECTRONICS

Part #	STM32F730V8

Description	Arm® Cortex®-M7 32b MCUFPU, 462DMIPS, 64KB Flash /256164KB RAM, USB OTG HS/FS, 18 TIMs, 3 ADCs, 21 com IF

PDF	202 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

30 / 202 page

Functional overview

STM32F730x8

30/202

DS12536 Rev 2

Figure 8. Power supply supervisor interconnection with internal reset OFF

The VDD specified threshold, below which the device must be maintained under reset, is

1.7 V (see Figure 9).

A comprehensive set of power-saving mode allows to design low-power applications.

When the internal reset is OFF, the following integrated features are no more supported:

•

The integrated power-on reset (POR) / power-down reset (PDR) circuitry is disabled

•

The brownout reset (BOR) circuitry must be disabled

•

The embedded programmable voltage detector (PVD) is disabled

•

VBAT functionality is no more available and VBAT pin should be connected to VDD.

All packages, except for the LQFP100, allow to disable the internal reset through the

PDR_ON signal when connected to VSS.

Figure 9. PDR_ON control with internal reset OFF

MS31383V4

NRST

VDD

PDR_ON

External VDD power supply supervisor

Ext. reset controller active when

VDD < 1.7 V

VDD

Application reset

signal

VSS

MS19009V7

V DD

time

PDR = 1.7 V

time

NRST

PDR_ON

Reset by other source than

power supply supervisor

STM32F730V8 Datasheet(PDF) 30 Page - STMicroelectronics