MF1P2131DA4SLASH02 datasheet(15/33 Pages) NXP

15 / 33 page

NXP Semiconductors

MF1P(H)x1y1

MIFARE Plus EV1

MF1P(H)x1y1

All information provided in this document is subject to legal disclaimers.

Product short data sheet

Rev. 3.2 — 6 December 2018

COMPANY PUBLIC

366932

15 / 33

8.8 Security level 0

Security level 0 is the initial delivery configuration of the PICC. The card can be operated

either using the backwards compatibility protocol or the ISO/IEC 14443-4 protocol.

In this level, the card can be personalized including the programming of user data as well

as CRYPTO1 and/or AES keys. In addition, the originality function can be used.

The following mandatory AES keys must be written, using the WritePerso command

before the PICC can be switched to security level 1 or security level 3.

Security level switching is performed using the CommitPerso command:

• CardConfigurationKey

• CardMasterKey

• L3SwitchKey

When the pre-personalization of the PICC is finished it is possible to upgrade the

PICC from security level 0 either to security level 1 or directly to security level 3 with

CommitPerso command.

Using the originality function, it is possible to verify that the chip is a genuine NXP

Semiconductors MIFARE Plus.

MF1P2131DA4/02 Datasheet(PDF) 15 Page - NXP Semiconductors