724-746-5500

blackbox.com

BLACK BOX®

4 of 6

05/14/2010

#24868

miles (50 km). The converters comply with IEEE 802.3 and 1000BASE-

LX/SX standards.

Mode Converters for ATM OC-3 and OC-12

Mode Converters for ATM support OC-3 or OC-12 standards

over ATM networks and the Synchronous Optical NETwork (SONET).

They’re perfect for extending line drops in large corporations,

regional and national telco switching offices, and other intercampus

telecommunication systems.

The FlexPoint OC-3 Single-Mode to Multimode Fiber Converter

provides 155-Mbps connections to extend network distances by

connecting multimode fiber networks or devices over single-mode

fiber cabling.

The FlexPoint OC-12 Single-Mode to Multimode Fiber Converter

provides 622-Mbps connections to extend network distances by

connecting multimode fiber networks or devices over single-mode

fiber cabling.

LEDs report the availability of power and the detection of devices

attached to the fiber ports.

10/100 Rate Converters

This group of rate converters connects Fast Ethernet 100BASE-FX

fiber to 10BASE-T or 100BASE-TX UTP LANs. They use autonegotiation

for full- and half-duplex operation and can handle numerous fiber

types. An override switch provides total manual control over the

10/100 operation of the UTP port and the half-/full-duplex operation

of both the fiber and UTP port.

The fiber port operates at 1300 or 1550 nm (depending on the

model) and features SC, ST, or MT-RJ connectors. Multimode models

support distances of 1.2 miles (1.9 km), and single-mode models

support up to 16.8 miles (27 km). Long-haul (LH) models support

distances of up to 34.8, 51, or 60 miles (56, 82, or 96.6 km).

These converters also feature a 1 MB store-and-forward buffer

and MAC address learning.

T1/E1 Copper to Fiber Line Drivers

FlexPoint T1/E1 Copper to Fiber Line Drivers convert coax and

twisted pair to multimode or single-mode fiber—and they extend T1/

E1 over fiber.

T1/E1 Copper to Fiber Line Drivers feature a crossover switch on

the RJ-45/RJ-48 port for easy connections to equipment. Dry relay

contacts on Pins 3 and 6 of the RJ-45 connector provide connection

to alarm equipment. The contact closes when the signal is lost on

the copper or fiber connection.

LEDs display the T1/E1 link status, diagnostic modes of operation,

and line segment errors.

The line drivers support AMI, B8ZS, and HDB3 line codes.

To install any of the converters on a DIN rail, select the DIN Rail

Mounting Kit (LMC207-DRM).

T e C h S P e C S

Power Chassis:

Indicators — LED: (1) Power

Power — LMC200: 115–230-VAC, 50–60-Hz, autosensing single power

supply;

LMC200-2PS: 115–230-VAC, 50–60-Hz, autosensing dual power supply;

LMC200A-DC: 48-VDC, single power supply;

LMC200A-2PS-DC: 48-VDC dual power supply

Size — 3"H x 19"W x 10"D (7.6 x 48.3 x 25.4 cm)

Weight — 7 lb. (3.2 kg)

5-Position Rackmounting Kit:

Size — 1.75" (1U) H x 19"W x 5"D (4.4 x 48.3 x 12.7 cm)

Weight — 2 lb. (0.9 kg)

Modules:

CE Approval — Yes

Power — 110-VAC, 60-Hz, external power supply (230-VAC,

50-Hz version on request) or from Power Chassis

Size — 1"H x 3"W x 4"D (2.5 x 7.6 x 10.2 cm)

Weight — 0.4 lb. (0.2 kg)

What’s included

Media Converter Chassis (LMC200, LMC200A-DC,

LMC200-2PS, LMC200A-2PS-DC):

✦

Chassis

✦

Power cord

✦

User’s manual

Media Converter Modules:

✦

Converter

✦

Power supply

✦

User’s manual