PLT5 522FA _P

DATASHEET

DATASHEET

12 | Version α.1 | 2022-09-15

Glossary

1)

Operating/Forward current: IF is measured with an internal reproducibility of ±7 % (acc. to GUM with a

coverage factor of k = 3).

2)

Reverse Operation: This product is intended to be operated applying a forward current within the speci-

fied range. Applying any reverse bias shall be avoided.

3)

Operating/Forward voltage: VF is measured with an internal reproducibility of ±0.05 V (acc. to GUM

with a coverage factor of k = 3).

4)

Wavelength: The wavelengths are measured with a tolerance of ±1 nm.

5)

Beam pointing accuracy: The values may contain measurement deviations.

6)

Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and

dimensions are specified in mm.