GS2107-WTBD datasheet(72/252 Pages) MITSUBISHI

72 / 252 page

11 - 2

11.1 Standard I/F Setting

11.1.3

Display contents of standard I/F

Described below are the display items on the standard I/F setting menu and their functions.

■1.

Display item

(1) Standard interface display BOX

The standard interface includes the following four types.

Standard I/F-1(RS422):

For communication with PLC, microcomputer and other equipment

Standard I/F-2(RS232):

For communication with PLC, PC (drawing software), modem, other equipment,

bar code reader and transparent

Standard I/F-3(USB):

For communication with PC (drawing software) and transparent

Standard I/F-4(Ethermet): For communication with PC (drawing software) and other equipment

(2) Channel No. specification menu BOX

Set a channel number to be used by the standard interface.

➠ 11.1.5 Channel setting operation

For the detail of the drivers which can be assigned to each channel, refer to this section (3).

• "9" is automatically set to the standard I/F-3(USB).

Set when the communication interface is not used.

1, 2:

Set when connecting to a controller.

Set when connecting to a bar code reader or RFID.

9:*1

Set when connecting to a PC (drawing software).

Set this channel when the gateway function (except when the connection with controllers is the

Ethernet connection) or the Ethernet download function is used.

Standard interface display BOX

Channel No.

specification

menu BOX

Driver display BOX

Drv button

Standard I/F-3(USB)

Standard I/F-1(RS-422)

Standard I/F-4(Ethernet)

Standard I/F-2(RS-232)

GS2107-WTBD Datasheet(PDF) 72 Page - Mitsubishi Electric Semiconductor