ZOPT2201 Datasheet

© 2016 Integrated Device Technology, Inc

31

September 2, 2016

3.11.6 ALS_DATA

Address

0DHEX and 0EHEX and 0FHEX

Default value

00HEX and 00HEX and 00HEX

Register access

R

Bit

7

6

5

4

3

2

1

0

0DHEX

ALS_DATA_0[7:0]

0EHEX

ALS_DATA_1[15:8]

0FHEX

0

0

0

0

ALS_DATA_2[19:16]

ALS channel digital output data (unsigned integer, 13 to 20 bit, LSB aligned).

Register data is already temperature compensated. See Table 3.3 for details.

When an I²C read operation is active and points to an address in the range 07HEX to 18HEX, all registers in this range are

locked until the I²C read operation is completed or this address range is left.

This guarantees that the data in the registers belongs to the same measurement cycle. New measurement data is

stored into temporary registers and the actual *_DATA registers are updated as soon as there is no on-going I²C read

operation to the address range 07HEX to 18HEX.

Register 0DHEX

Bit[7:0]

ALS diode data least significant data byte

Register 0EHEX

Bit[7:0]

ALS diode data intervening data byte

Register 0FHEX

Bit[3:0]

ALS diode data most significant data byte