RAFIX22FS datasheet(4/28 Pages) ITT

4 / 28 page

2 - 166

Control Components

RAFIX 22 FS

Panel cut-out to IEC 60947

All actuators are provided with a locating pip.

With a grid spacing of 30 mm, the collars of the square

actuators are arranged next to each other without a space

in between. We recommend to use this grid spacing also

for the round collar shapes (IEC 60947).

Assembly indication

The mismatch of actuators and contact blocks must be

in a range of ø 0.2 mm.

Numerous design options for

individual panels

RAFIX 22 FS is available with many options.

Various lens and frontring combinations offer

nearly unlimited design options for your

panels. RAFIX 22 FS ist available both

with a round or a square collar.

The square version can be arranged

one collar to the next just as an

integral keypad.

Locating pip 1*

LED cathode

NO contacts

(on version with 2 NC’s, NC contacts)

Locating pip 2*

LED anode

NC contacts

(on version with 2 NO’s, NO contacts)

Hole patterns PCB,

view on component side

* For better distinction the locating pip 2 has

a bigger diameter than pip 1. In order to

ease the mounting, the positions are

additionally marked on the upper side of

the housing.

RAFIX

22 FS

min. 30.00

Actuator position

RAFIX22FS Datasheet(PDF) 4 Page - ITT Industries