ED-IPC2000 Series Datasheet

EDA Technology Co.,LTD

8

3.2 Rear Panel

3.2.1 Rpiboot Button

Press this button before the device is powered on, and CM4 will enter the burning mode. Users can burn

the device through rpiboot tool.

3.2.2 Micro SD Card

IPC2000 series support dual storage scheme, eMMC+micro SD card. eMMC is used for the main file

system, and micro SD card can be used for expanding data storage. Users can choose SD cards with

different capacities to store data according to application requirements. Compared with the built-in eMMC

memory, SD cards have larger capacity and lower cost. Users can use eMMC on CM4 to store system

code and SD card to store application data.

tip：Micro SD card can only be used for extended storage and cannot be boot from SD card.

3.2.3 Camera Hole

A camera hole is reserved in the middle of the rear panel, which can be used to install various official

models of CSI interface cameras from Raspberry Pi.

Note: Only ED-IPC2020 has a CSI interface reserved for connecting to a camera.