NXP Semiconductors

CLRD730

PEGODA contactless smart card reader based on open-controller NFC reader PN7642 with

optional contact interface

8.4 Compliance information according to Article 10.8 of the Radio Equipment Directive

2014/53/EU

The following information is provided per Article 10.8 of the Radio Equipment Directive 2014/53/EU:

(a) Frequency bands in which the equipment operates.

(b) The maximum RF power transmitted.

PN

RF Technology

Freq. Ranges

Max. Transmitted Power

CLRD730

RFID

13.553 – 13.567 MHz

30 dBm

EUROPEAN DECLARATION OF CONFORMITY (Simplified DoC per Article 10.9 of the Radio Equipment

Directive 2014/53/EU).

This apparatus, namely CLRD730 Contactless Reader, conforms to the Radio Equipment Directive 2014/53/EU.

The full EU Declaration of Conformity for this apparatus can be delivered on request via https://www.nxp.com/

mynxp/secure-files.

8.5 CE Declaration of Conformity

This Information Technology Equipment has been tested and found to comply with the following European

directives:

Harmonized

standards applied

Description

EN 62368-1:2020 +

A11:2020

Health and safety requirements pursuant to § 3 (1) 1. (Article 3(1) a)

EN 300 330

Air interface of the radio systems pursuant to § 3(2) (Article 3(2))

EN 303 446-1

Electromagnetic compatibility (EMC) standard for combined and/or integrated radio and non-radio

equipment; Part 1: Requirements for equipment intended to be used in residential, commercial and

light industry locations; Harmonized standard covering the essential requirements of article 3.1 (b)

of Directive 2014/53/EU

EN 301 489-1

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common

technical requirements; Harmonized Standard covering the essential requirements of article 3.1(b)

of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU

EN 301 489-3

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific

conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;

Harmonized standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU

EN 301 489-17

ElectroMagnetic Compatibility (EMC) standard for radio equipment and ElectroMagnetic

Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for

Broadband Data Transmission Systems; Harmonized Standard covering the essential requirements

of

article 3.1(b) of Directive 2014/53/EU

EN 61000-3-2

Electromagnetic compatibility - Limits for harmonic current emissions

EN 61000-3-3

Electromagnetic compatibility - Limitation of voltage fluctuations and flicker in low-voltage supply

systems

EN 61000-4-2

Electromagnetic compatibility – Electronic discharge immunity test

EN 61000-4-3

Electromagnetic compatibility – Radiated radio-frequency electromagnetic field immunity test

Table 11. CE Declaration of Conformity

CLRD730

All information provided in this document is subject to legal disclaimers.

© 2023 NXP B.V. All rights reserved.

Product data sheet

Rev. 3.0 — 6 July 2023

28 / 36