| Electronic Components Datasheet Search |
|
CDB5521 Datasheet(PDF) 15 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CDB5521 Datasheet(HTML) 15 Page - Cirrus Logic |
|
15 / 28 page ![]() CDB5521/22/23/24/28 DS317DB2 15 2.4 Setup Window Overview The Setup Window (Figure 6) allows the user to read and write to the internal register of the con- verter in either binary or hexadecimal, and acquire real-time conversions. It has quick access control icons that quickly reset the converter, reset the con- verter’s serial port, or self-calibrate the converter’s offset and gain. The following are controls and in- dicators associated with this window. •Acquire Data This is a control icon. When pressed, the PC transmits the collect single conversion command to the microcontroller. The microcontroller in turn collects a conversion from the ADC and re- turns it to the PC. The PC stores the conversion and collects additional conversions to form a set. From the sample set collected, the high, the low, peak-to-peak, average, and standard deviation, are computed (the size of the data set is set by the Num To Average input) and then the display icons are updated. This process continues until the STOP button is pressed, or until another win- dow is selected. Note: The quick access control icons are disabled once Acquire is selected. This eliminates potential hardware conflicts. • Binary Icons Input icons array to set/clear the 24 individual bits in the configuration or channel-setup regis- ters. The respective registers bit is set/cleared as soon as the icon is clicked. • Channel Selects the Setup that will be accessed to per- form conversions when Acquire Data is activat- ed. • Register Decode Box Text display box that displays the decoded meaning of each bit in the configuration regis- ter and the channel setup registers. Use the pull- down menu above the register decode box to select between the different registers. • Hexadecimal Icons Nine input/display icons that allow a user to set/clear the 24 bits in the configuration, or channel setup registers via 6 hexadecimal nib- bles. If the upper nibbles in the registers are ze- ro’s, the leading zero nibbles need not be entered. • Num To Average Input icon that sets the size of the data conver- sion set referred to after the Acquire Icon is ac- tivated. • Reinitialize Port This is a control icon. When pressed, 128 logic 1’s followed by a logic ‘0’ are sent to the ADC’s serial port to reset its port. It does not re- set the RS-232 link. • Reset A/D This is a control icon. When pressed, the micro- controller sends the appropriate commands to return the converter to its initial default state. • Stop Stops the collection of conversion data. • Update Icons This is a control icon. When pressed the config- uration and channel -setup registers contents are acquired. Then, the configuration text box and the register content icons are updated. • Data FIFO Window This button opens the Data FIFO Window when pressed. 2.5 Data FIFO Window Overview The following describes the controls available in the Data FIFO Window (Figure 7). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |