3mm (T1) Package Discrete LEDs

AMBER

Bivar reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A.

Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com

Rev. A 01/16/08

Page 4 of 4

Bivar reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A.

Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com

Revision A 03/08

Page 4 of 4

Recommended Soldering Conditions

Packaging and Labeling Plan

AntiStatic Poly Bag with Desiccant

(500 pcs Max. per Bag)

Bivar reserves the right to make changes at any time without notice.

Preheat Temperature: 100ºC Max.

Peak Temperature: 260ºC Max.

Preheat Time: 20 ~ 50 Seconds

Solder Time Above 217ºC: 5 Seconds Max.

Note: Turn off top heater at preheat to prevent the lamp body directly exposed to the heat source.

Recommended Lead Free Wave Soldering Profile

1.8mm Package Discrete LED

AMBER