 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
AT80C51RA2-RLSIV Datasheet(PDF) 47 Page - International Rectifier |
|
|
|||||||||||||||||||||||||||||
AT80C51RA2-RLSIV Datasheet(HTML) 47 Page - International Rectifier |
|
|
47 / 85 page  47 4188E–8051–08/06 AT/TS8xC51Rx2 Reset value XXXX X000 6.8.2 WDT during Power-down and Idle In Power-down mode the oscillator stops, which means the WDT also stops. While in Power- down mode the user does not need to service the WDT. There are 2 methods of exiting Power- down mode: by a hardware reset or via a level activated external interrupt which is enabled prior to entering Power-down mode. When Power-down is exited with hardware reset, servicing the WDT should occur as it normally should whenever the TS80C51Rx2 is reset. Exiting Power- down with an interrupt is significantly different. The interrupt is held low long enough for the oscillator to stabilize. When the interrupt is brought high, the interrupt is serviced. To prevent the WDT from resetting the device while the interrupt pin is held low, the WDT is not started until the interrupt is pulled high. It is suggested that the WDT be reset during the interrupt service routine. To ensure that the WDT does not overflow within a few states of exiting of powerdown, it is best to reset the WDT just before entering powerdown. In the Idle mode, the oscillator continues to run. To prevent the WDT from resetting the TS80C51Rx2 while in Idle mode, the user should always set up a timer that will periodically exit Idle, service the WDT, and re-enter Idle mode. Bit Number Bit Mnemonic Description 7T4 Reserved Do not try to set or clear this bit. 6T3 5T2 4T1 3T0 2 S2 WDT Time-out select bit 2 1 S1 WDT Time-out select bit 1 0 S0 WDT Time-out select bit 0 S2 S1 S0Selected Time-out 000(2 14 - 1) machine cycles, 16.3 ms @ 12 MHz 001(215 - 1) machine cycles, 32.7 ms @ 12 MHz 010(216 - 1) machine cycles, 65.5 ms @ 12 MHz 011(2 17 - 1) machine cycles, 131 ms @ 12 MHz 100(218 - 1) machine cycles, 262 ms @ 12 MHz 101(219 - 1) machine cycles, 542 ms @ 12 MHz 110(2 20 - 1) machine cycles, 1.05 s @ 12 MHz 111(221 - 1) machine cycles, 2.09 s @ 12 MHz |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
