DATA SHEET

SE2528L: 2.4 GHz Power Amplifier with Power Detector

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

202419A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012

12

Package Handling Information

Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed

regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption

may occur when the part is subjected to high temperature during solder assembly. The SE2528L is capable of

withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or

in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that

the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For

details on both attachment techniques, precautions, and handling procedures recommended, please refer to:



“Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045



“Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044



“ESD Control Policy”, Document Number SQ03-0062

Branding Information

SiGe

2528L

Lot Code

Lot Code

Part Number

Pin 1 Designator

Pin 1

Company Name

Figure 12: SE2528L Branding Information

Tape and Reel Information

Parameter

Value

Devices Per Reel

3000

Reel Diameter

13 inches

Tape Width

12 millimeters

Figure 13: SE2528L-R Tape and Reel Information

Caution! Class 0 ESD sensitive device